[sr-dev] git:master: modules/acc: insert_mode readme enhancements

Module: sip-router Branch: master Commit: a11a1f4ebce11368eef01824913e9ff115042a28 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=a11a1f4… Author: Juha Heinanen &lt;jh(a)tutpro.com&gt; Committer: Juha Heinanen &lt;jh(a)tutpro.com&gt; Date: Wed Apr 16 15:32:05 2014 +0300 modules/acc: insert_mode readme enhancements --- modules/acc/README | 77 +++++++++++++++++++++-------------------- modules/acc/doc/acc_admin.xml | 4 +- 2 files changed, 41 insertions(+), 40 deletions(-) diff --git a/modules/acc/README b/modules/acc/README index bf53f25..ea72fd6 100644 --- a/modules/acc/README +++ b/modules/acc/README @@ -29,11 +29,11 @@ Sven Knoblich 1&1 Internet AG &lt;sven.knoblich(a)1und1.de&gt; - Copyright � 2002, 2003 FhG FOKUS + Copyright (c) 2002, 2003 FhG FOKUS - Copyright � 2004, 2006 Voice Sistem SRL + Copyright (c) 2004, 2006 Voice Sistem SRL - Copyright � 2011 1&1 Internet AG + Copyright (c) 2011 1&1 Internet AG Revision History Revision $Revision$ $Date$ __________________________________________________________________ @@ -1114,9 +1114,10 @@ modparam("acc", "db_extra", "ct=$hdr(Content-type); email=$avp(s:email)") tables are defined with different type (e.g., MyISAM). If set to 2, async insert is used if the db driver module has support - for it. If not, then standard INSERT is used. + for it and if async_workers core parameter value is greater than 0. If + not, then standard INSERT is used. - Default value is 0 (no INSERT DELAYED). + Default value is 0 (no INSERT DELAYED nor async insert). Example 1.32. db_insert_mode example ... @@ -1356,7 +1357,7 @@ modparam("acc", "time_format", "%Y/%m/%d %H:%M:%S") 7.3. acc_rad_request(comment) 7.4. acc_diam_request(comment) -7.1. acc_log_request(comment) +7.1. acc_log_request(comment) acc_request reports on a request, for example, it can be used to report on missed calls to off-line users who are replied 404 - Not Found. To @@ -1377,7 +1378,7 @@ $avp(reason) = "Not found"; acc_log_request("$var(code) Error: $avp(reason)"); ... -7.2. acc_db_request(comment, table) +7.2. acc_db_request(comment, table) Like acc_log_request, acc_db_request reports on a request. The report is sent to database at "db_url", in the table referred to in the second @@ -1398,7 +1399,7 @@ acc_db_request("Some comment", "acc_$time(year)_$time(mon)"); acc_db_request("$var(code) Error: $avp(reason)", "SomeTable"); ... -7.3. acc_rad_request(comment) +7.3. acc_rad_request(comment) Like acc_log_request, acc_rad_request reports on a request. It reports to radius server as configured in "radius_config". @@ -1415,7 +1416,7 @@ acc_rad_request("Some comment"); acc_rad_request("$var(code) Error: $avp(reason)"); ... -7.4. acc_diam_request(comment) +7.4. acc_diam_request(comment) Like acc_log_request, acc_diam_request reports on a request. It reports to the configured Diameter server. @@ -1443,55 +1444,55 @@ Chapter 2. Frequently Asked Questions 2.1. - What happend with old log_fmt parameter + What happend with old log_fmt parameter - The parameter became obsolete with the restructure of the data logged - by ACC module (refer to the Overview chapter). For similar behaviour - you can use the extra accouting (see the coresponding chapter). + The parameter became obsolete with the restructure of the data logged + by ACC module (refer to the Overview chapter). For similar behaviour + you can use the extra accouting (see the coresponding chapter). 2.2. - What happend with old multi_leg_enabled parameter + What happend with old multi_leg_enabled parameter - The parameter becaome obsolete by the addition of the new - multi_leg_info parameter. The multi-leg accouting is automatically - enabled when multi_leg_info is defined. + The parameter becaome obsolete by the addition of the new + multi_leg_info parameter. The multi-leg accouting is automatically + enabled when multi_leg_info is defined. 2.3. - What happend with old src_leg_avp_id and dst_leg_avp_id parameters + What happend with old src_leg_avp_id and dst_leg_avp_id parameters - The parameter was replaced by the more generic new parameter - multi_leg_info. This allows logging (per-leg) of more information than - just dst and src. + The parameter was replaced by the more generic new parameter + multi_leg_info. This allows logging (per-leg) of more information than + just dst and src. 2.4. - Where can I find more about Kamailio? + Where can I find more about Kamailio? - Take a look at http://www.kamailio.org/. + Take a look at http://www.kamailio.org/. 2.5. - Where can I post a question about this module? + Where can I post a question about this module? - First at all check if your question was already answered on one of our - mailing lists: - * User Mailing List - - http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users - * Developer Mailing List - - http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev + First at all check if your question was already answered on one of our + mailing lists: + * User Mailing List - + http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users + * Developer Mailing List - + http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev - E-mails regarding any stable Kamailio release should be sent to - &lt;sr-users(a)lists.sip-router.org&gt; and e-mails regarding development - versions should be sent to &lt;sr-dev(a)lists.sip-router.org&gt;rg>. + E-mails regarding any stable Kamailio release should be sent to + &lt;sr-users(a)lists.sip-router.org&gt; and e-mails regarding development + versions should be sent to &lt;sr-dev(a)lists.sip-router.org&gt;rg>. - If you want to keep the mail private, send it to - &lt;sr-users(a)lists.sip-router.org&gt;rg>. + If you want to keep the mail private, send it to + &lt;sr-users(a)lists.sip-router.org&gt;rg>. 2.6. - How can I report a bug? + How can I report a bug? - Please follow the guidelines provided at: - http://sip-router.org/tracker. + Please follow the guidelines provided at: + http://sip-router.org/tracker. diff --git a/modules/acc/doc/acc_admin.xml b/modules/acc/doc/acc_admin.xml index 8b5ee60..54b9517 100644 --- a/modules/acc/doc/acc_admin.xml +++ b/modules/acc/doc/acc_admin.xml @@ -1099,10 +1099,10 @@ modparam("acc", "db_extra", "ct=$hdr(Content-type); email=$avp(s:email)") </para> <para> If set to 2, async insert is used if the db driver module has - support for it. If not, then standard INSERT is used. + support for it and if async_workers core parameter value is greater than 0. If not, then standard INSERT is used. </para> <para> - Default value is 0 (no INSERT DELAYED). + Default value is 0 (no INSERT DELAYED nor async insert). </para> <example> <title>db_insert_mode example</title>