[sr-dev] RPC WEB interface

Hello all, I plan to build a small embedded web interface into sip-router for executing RPC commands from a web page. I already have part of the infrastructure working (re-using the HTTP part from core and the xhttp module). I would like to provide a simple and clean interface, organizing the access to RPC comands based on the module that provides them. The issue is that once an RPC command is registered into the core, the module that provides the command is not available. I'm looking foe a way to capture this information. One way to capture this information would be to change the signature of the rpc_lookup.h:rpc_register_array() and provide the module name along with the rpc_exports. I know that some modules set the name of their rpc commands based on the following pattern: <module>.<rpc_command>, but his is not fully enforced (there are rpc commands that are not following this pattern). One option would be to change the name of those commands and provide the old names as an alias. Also, there are modules that register the rpc_exports via the sr interface before the modules init and modules that registers the rpc_exports during init (via the rpc_register_array). This means that the list of rpc commands is not complete until all modules are initialized. It would be good to be more strict and enforce rpc registration for all modules before init (this will require a new interface and I think there was a plan to merge the ser module interface with the kamailio module interface). To summarize, I'm trying to solve two issues here: 1. trace back the module that provides an rpc command based on command name; 2. enforcing a common module interface for both ser and kamailio modules. Regards, Ovidiu Sas