Hello Klaus,
On 5/11/10 4:09 PM, Klaus Darilion wrote:
Hi Daniel!
Intersting new features.
thanks, type fixed!
1. There is a typo
Am 11.05.2010 15:27, schrieb Daniel-Constantin Mierla:
+3.3. t_reply_callid(callid, cseq, code,
reason)
+
+ Send reply to first INVITE transaction identified by callid and
cseq.
+
+ Parameters:.
+ * callid - call-id value.
+ * cseq - cseq number.
+ * code - reply code.
+ * reason - reply reason.
+
+ This function can be used in ANY_ROUTE.
+
+ Example 1.3. t_cancel_reply usage
+...
+if (t_cancel_callid("123qaz", "5", "458", "Replied
remotely")) {
^^^^^^^^^^^^^^
should be t_reply_callid().
2. Can it be used to send final failure replies only (>300) or also
2xx and 1xx?
should be ok for any reply, I don't see any issue right now, just you
need other tricks for setting the body if you need.
3. What exactly is the "flag" in t_cancel_callid? transaction flag?
branch flag? So calling t_cancel_callid("123qaz", "5",
"22") is
equivalent to calling setflag(22) in the respective INVITE transaction?
It is transaction flag, like setflag(22) for INVITE.
Cheers,
Daniel
regards
klaus
+ xlog("transaction
replied\n");
+}
+...
+
4. Exported pseudo-variables
* $T_branch_idx
@@ -153,22 +199,22 @@ if (t_cancel_branches("all")) {
5.3. t_hash
5.4. t_reply
-5.1. t_uac_dlg
+5.1. t_uac_dlg
Generates and sends a local SIP request.
Parameters:
* method - request method
* RURI - request SIP URI
- * NEXT HOP - next hop SIP URI (OBP); use "." if no value.
- * socket - local socket to be used for sending the request; use
"."
+ * NEXT HOP - next hop SIP URI (OBP); use “.” if no value.
+ * socket - local socket to be used for sending the request; use
“.”
if no value.
* headers - set of additional headers to be added to the
request; at
- least "From" and "To" headers must be specify)
+ least “From” and “To” headers must be specify)
* body - (optional, may not be present) request body (if present,
- requires the "Content-Type" and "Content-length" headers)
+ requires the “Content-Type” and “Content-length” headers)
-5.2. t_uac_cancel
+5.2. t_uac_cancel
Generates and sends a CANCEL for an existing local SIP request.
@@ -176,14 +222,14 @@ if (t_cancel_branches("all")) {
* callid - callid of the INVITE request to be cancelled.
* cseq - cseq of the INVITE request to be cancelled.
-5.3. t_hash
+5.3. t_hash
Gets information about the load of TM internal hash table.
Parameters:
* none
-5.4. t_reply
+5.4. t_reply
Generates and sends a reply for an existing inbound SIP
transaction.
@@ -193,9 +239,9 @@ if (t_cancel_branches("all")) {
* trans_id - transaction identifier (has the hash_entry:label
format)
* to_tag - To tag to be added to TO header
* new_headers - extra headers to be appended to the reply; use
a dot
- (".") char only if there are no headers;
+ (“.”) char only if there are no headers;
* body - (optional, may not be present) reply body (if present,
- requires the "Content-Type" and "Content-length" headers)
+ requires the “Content-Type” and “Content-length” headers)
6. Exported statistics
@@ -212,7 +258,7 @@ if (t_cancel_branches("all")) {
6.11. inuse_transactions
Exported statistics are listed in the next sections. All statistics
- except "inuse_transactions" can be reset.
+ except “inuse_transactions” can be reset.
6.1. received_replies
diff --git a/modules_k/tmx/doc/tmx_admin.xml
b/modules_k/tmx/doc/tmx_admin.xml
index ac82335..7ba6c32 100644
--- a/modules_k/tmx/doc/tmx_admin.xml
+++ b/modules_k/tmx/doc/tmx_admin.xml
@@ -95,6 +95,82 @@ if (t_cancel_branches("all")) {
</programlisting>
</example>
</section>
+ <section>
+ <title>
+ <function moreinfo="none">t_cancel_callid(callid, cseq, flag)
+ </function>
+ </title>
+ <para>
+ Cancel first INVITE transaction identified by callid and
cseq. It sets
+ the flag if the value is greater than zero
+ </para>
+ <para>
+ Parameters:.
+ </para>
+ <itemizedlist>
+ <listitem><para>
+ <emphasis>callid</emphasis> - call-id value.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>cseq</emphasis> - cseq number.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>flag</emphasis> - index of the flag to set.
+ </para></listitem>
+ </itemizedlist>
+ <para>
+ This function can be used in ANY_ROUTE.
+ </para>
+ <example>
+ <title><function>t_cancel_callid</function> usage</title>
+ <programlisting format="linespecific">
+...
+if (t_cancel_callid("123qaz", "5", "22")) {
+ xlog("transaction cancelled\n");
+}
+...
+</programlisting>
+ </example>
+ </section>
+ <section>
+ <title>
+ <function moreinfo="none">t_reply_callid(callid, cseq, code, reason)
+ </function>
+ </title>
+ <para>
+ Send reply to first INVITE transaction identified by callid
and cseq.
+ </para>
+ <para>
+ Parameters:.
+ </para>
+ <itemizedlist>
+ <listitem><para>
+ <emphasis>callid</emphasis> - call-id value.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>cseq</emphasis> - cseq number.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>code</emphasis> - reply code.
+ </para></listitem>
+ <listitem><para>
+ <emphasis>reason</emphasis> - reply reason.
+ </para></listitem>
+ </itemizedlist>
+ <para>
+ This function can be used in ANY_ROUTE.
+ </para>
+ <example>
+ <title><function>t_cancel_reply</function> usage</title>
+ <programlisting format="linespecific">
+...
+if (t_cancel_callid("123qaz", "5", "458", "Replied
remotely")) {
+ xlog("transaction replied\n");
+}
+...
+</programlisting>
+ </example>
+ </section>
</section>
<section>
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
_______________________________________________
sr-dev mailing list
sr-dev(a)lists.sip-router.org
http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
--
Daniel-Constantin Mierla
*
http://www.asipto.com/
*
http://twitter.com/miconda
*
http://www.linkedin.com/in/danielconstantinmierla