sr-dev

sr-dev@lists.kamailio.org

16 participants
45408 discussions

git:master:0ab44e99: modules: readme files regenerated - userblocklist ... [skip ci]
by Kamailio Dev 04 Jun '25

04 Jun '25

Module: kamailio Branch: master Commit: 0ab44e999c81a25dc826f23e724cf699ce894beb URL: https://github.com/kamailio/kamailio/commit/0ab44e999c81a25dc826f23e724cf69… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2025-06-04T08:01:09+02:00 modules: readme files regenerated - userblocklist ... [skip ci] --- Modified: src/modules/userblocklist/README --- Diff: https://github.com/kamailio/kamailio/commit/0ab44e999c81a25dc826f23e724cf69… Patch: https://github.com/kamailio/kamailio/commit/0ab44e999c81a25dc826f23e724cf69… --- diff --git a/src/modules/userblocklist/README b/src/modules/userblocklist/README index 9aabcb73d19..4cff231c495 100644 --- a/src/modules/userblocklist/README +++ b/src/modules/userblocklist/README @@ -154,9 +154,9 @@ Chapter 1. Admin Guide blocklisted or not. An additional functionality that this module provides is the ability to - handle global blocklists. This lists are loaded on startup into memory, - thus providing a better performance than the userblocklist case. These - global blocklists are useful to allow only calls to certain + handle global blocklists. These lists are loaded on startup into + memory, thus providing a better performance than the userblocklist + case. These global blocklists are useful to allow only calls to certain international destinations, i.e. block all not allowlisted numbers. They could also be used to prevent the blocklisting of important numbers, as allowlisting is supported too. This is useful for example

1 0

git:master:81357b54: userblocklist: docs - small typo
by Daniel-Constantin Mierla 04 Jun '25

04 Jun '25

Module: kamailio Branch: master Commit: 81357b548b6e0cdf464361c2b1742d797f0d7e95 URL: https://github.com/kamailio/kamailio/commit/81357b548b6e0cdf464361c2b1742d7… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2025-06-04T07:50:46+02:00 userblocklist: docs - small typo --- Modified: src/modules/userblocklist/doc/userblocklist_admin.xml --- Diff: https://github.com/kamailio/kamailio/commit/81357b548b6e0cdf464361c2b1742d7… Patch: https://github.com/kamailio/kamailio/commit/81357b548b6e0cdf464361c2b1742d7… --- diff --git a/src/modules/userblocklist/doc/userblocklist_admin.xml b/src/modules/userblocklist/doc/userblocklist_admin.xml index db8efd86896..0a64d648ea1 100644 --- a/src/modules/userblocklist/doc/userblocklist_admin.xml +++ b/src/modules/userblocklist/doc/userblocklist_admin.xml @@ -20,7 +20,7 @@ </para> <para> An additional functionality that this module provides is the ability - to handle global blocklists. This lists are loaded on startup into + to handle global blocklists. These lists are loaded on startup into memory, thus providing a better performance than the userblocklist case. These global blocklists are useful to allow only calls to certain international destinations, i.e. block all not allowlisted numbers.

1 0

git:master:0195e860: siptrace: reset x/avp lists after event route
by Daniel-Constantin Mierla 04 Jun '25

04 Jun '25

Module: kamailio Branch: master Commit: 0195e86084ffbe5333310fc4206f4a6d01662a85 URL: https://github.com/kamailio/kamailio/commit/0195e86084ffbe5333310fc4206f4a6… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2025-06-04T07:50:46+02:00 siptrace: reset x/avp lists after event route --- Modified: src/modules/sipdump/sipdump_mod.c --- Diff: https://github.com/kamailio/kamailio/commit/0195e86084ffbe5333310fc4206f4a6… Patch: https://github.com/kamailio/kamailio/commit/0195e86084ffbe5333310fc4206f4a6… --- diff --git a/src/modules/sipdump/sipdump_mod.c b/src/modules/sipdump/sipdump_mod.c index cdac1a32ccf..e199d1cefc9 100644 --- a/src/modules/sipdump/sipdump_mod.c +++ b/src/modules/sipdump/sipdump_mod.c @@ -40,6 +40,8 @@ #include "../../core/mod_fix.h" #include "../../core/fmsg.h" #include "../../core/events.h" +#include "../../core/srapi.h" +#include "../../core/receive.h" #include "../../core/kemi.h" #include "sipdump_write.h" @@ -286,14 +288,14 @@ static sipdump_data_t *sipdump_event_data = NULL; */ int sipdump_event_route(sipdump_data_t *sdi) { - int backup_rt; run_act_ctx_t ctx; run_act_ctx_t *bctx; sr_kemi_eng_t *keng = NULL; str evname = str_init("sipdump:msg"); sip_msg_t *fmsg = NULL; + ksr_msg_env_t menv = {0}; - backup_rt = get_route_type(); + ksr_msg_env_push(&menv); set_route_type(EVENT_ROUTE); init_run_actions_ctx(&ctx); fmsg = faked_msg_next(); @@ -312,7 +314,8 @@ int sipdump_event_route(sipdump_data_t *sdi) } } sipdump_event_data = NULL; - set_route_type(backup_rt); + ksr_msg_env_reset(); + ksr_msg_env_pop(&menv); if(ctx.run_flags & DROP_R_F) { return DROP_R_F; }

1 0

[kamailio/kamailio] Cannot connect using MySQL option group name in DBURL (Issue #4271)
by dynax60 03 Jun '25

03 Jun '25

dynax60 created an issue (kamailio/kamailio#4271) Hi all! ```bash [root@kamailio kamailio]# cat /etc/rocky-release Rocky Linux release 9.5 (Blue Onyx) [root@kamailio kamailio]# sestatus SELinux status: disabled [root@kamailio kamailio]# kamailio -v version: kamailio 6.0.1 (x86_64/linux) fce50d flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: fce50d compiled on 00:00:00 Sep 13 2022 with gcc 11.5.0 ``` I am trying to use the mysql option group name `kamailio` to connect to MySQL: ``` #!ifdef WITH_MYSQL #!trydef DBURL "mysql://[kamailio]/kamailio" #!endif ``` My /etc/my.cnf file: ``` # # This group is read both both by the client and the server # use it for options that affect everything # [client-server] # # include all files from the config directory # !includedir /etc/my.cnf.d/ ``` /etc/my.cnf.d/kamailio.cnf: ``` [kamailio] socket=/var/lib/mysql/mysql.sock user = kamailio password = ... default-character-set = utf8 ``` Let's check the group name and permissions (for test purposes): ```bash [root@kamailio kamailio]# usermod -s /bin/sh kamailio [root@kamailio kamailio]# su - kamailio -c 'my_print_defaults -c /etc/my.cnf kamailio' --socket=/var/lib/mysql/mysql.sock --user=kamailio --password=... --default-character-set=utf8 ``` The cuts from log file: ``` May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:1035]: init_mod(): auth_db May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <db_bind_api> in module db_mysql [/usr/lib64/kamailio/modules/db_mysql.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [lib/srdb1/db.c:217]: db_bind_mod(): using db bind api for db_mysql May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <bind_auth_s> in module auth [/usr/lib64/kamailio/modules/auth.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:1035]: init_mod(): presence May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: presence [presence.c:301]: mod_init(): db_url=mysql://[kamailio]/kamailio (len=27 addr=0x7f6002ba6f00) May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/utils/sruid.c:127]: sruid_init(): root for sruid is [pres-683a04b4-1c59-] (0 / 19) May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: presence [presence.c:345]: mod_init(): server_address parameter not set in configuration file May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <bind_sl> in module sl [/usr/lib64/kamailio/modules/sl.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <load_tm> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_newtran> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_relay_to_tcp> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_relay_to_udp> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_relay> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_forward_nonack> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <t_release> in module tm [/usr/lib64/kamailio/modules/tm.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:762]: find_mod_export_record(): found export of <db_bind_api> in module db_mysql [/usr/lib64/kamailio/modules/db_mysql.so] May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [lib/srdb1/db.c:217]: db_bind_mod(): using db bind api for db_mysql May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [lib/srdb1/db.c:322]: db_do_init2(): connection 0x7f6002c25500 not found in pool May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: db_mysql [km_my_con.c:121]: db_mysql_new_connection(): opening connection: mysql://xxxx:xxxx@/kamailio May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: ERROR: db_mysql [km_my_con.c:219]: db_mysql_new_connection(): driver error: Access denied for user 'kamailio'@'localhost' (using password: NO) May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: ERROR: <core> [lib/srdb1/db.c:326]: db_do_init2(): could not add connection to the pool May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: ERROR: presence [presence.c:417]: mod_init(): Connection to database failed May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: ERROR: <core> [core/sr_module.c:1040]: init_mod(): Error while initializing module presence (/usr/lib64/kamailio/modules/presence.so) May 30 19:19:16 kamailio /usr/sbin/kamailio[7257]: DEBUG: <core> [core/sr_module.c:875]: destroy_modules(): starting modules destroy phase ``` Strange things happens if I place [kamailio] configuration into /etc/my.cnf - everything works like a charm! What could be wrong? How to check by other means? The problem is exactly that kamailio can't read the configuration in the external file /etc/my.cnf.d/kamailio.cnf -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4271 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4271(a)github.com>

3 4

[kamailio/kamailio] rtpengine: fix race condn (same ip:port) in parallel forks due to gencookie (PR #4139)
by Souradeep Bera 01 Jun '25

01 Jun '25

- avoid parallel calls to gencookie from generating the same cookie for rtpengine #### Pre-Submission Checklist    - [ ] Commit message has the format required by CONTRIBUTING guide - [ ] Commits are split per component (core, individual modules, libs, utils, ...) - [ ] Each component has a single commit (if not, squash them into one commit) - [ ] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [ ] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [ ] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/4139 -- Commit Summary -- * rtpengine: fix race condn assigning same ip:port due to gencookie in parallel forks -- File Changes -- M src/modules/rtpengine/rtpengine.c (3) -- Patch Links -- https://github.com/kamailio/kamailio/pull/4139.patch https://github.com/kamailio/kamailio/pull/4139.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/4139 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/4139(a)github.com>

4 6

[kamailio/kamailio] Possibly adjusting the SDP parser to be more lenient towards scenarios where a stream is being removed/rejected and connection-information "c=" is only available per media (no session-wide "c=") and the removed/rejected stream omits all fields (Issue #3982)
by thomas414 31 May '25

31 May '25

### Description I encountered an issue with a specific device that is receiving a T.38 fax. The call gets established towards the device normally with inband media, then the device requests T.38 media and tries to remove the audio media via sending port 0 in the ReInvite SDP. Also it sends connection-information only on the media level and there is no "c=" on the session level. Reading through the related RFCs and the kamailio code and discussing this on the mailing list, we came to the conclusion that kamailio is doing everything correct as per RFC. Though we were wondering if it would be possible to adjust the parser to be not as strict as it is right now, and allow a missing "c=" line on the media-level if the stream is removed/rejected via port 0, since i see no sense in requiring connection information. Of course we are also in contact with the vendor to hopefully adjust on their side. Here are the related RFCs: 1. RFC8866 5.7 `A session description MUST contain either at least one "c=" line in each media description or a single "c=" line at the session level. It MAY contain a single session-level "c=" line and additional media-level "c=" line(s) per-media-description, in which case the media-level values override the session-level settings for the respective media.` 2. RFC3264 8.2 `Existing media streams are removed by creating a new SDP with the port number for that stream set to zero. The stream description MAY omit all attributes present previously, and MAY list just a single media format.` At first i was especially confused by the RFC3264 8.2 part, since it seemed correct what the device is sending, but if you read carefully and keep the wording for SDP in mind only attributes ("a=") MAY be omitted. So a "c=" line should still be in the SDP for the removed media if it's not included on the session-level. Or do you see this differently? ### Expected behavior Kamailio allows and parses the SDP when there is no session-wide "c=", a media stream is being removed via port zero and there is no "c=" for this media stream and only the remaining media streams include a "c=" line. #### Actual observed behavior Kamailio throws an error when trying to parse the SDP. #### Log Messages ``` <core> [core/parser/sdp/sdp.c:523]: parse_sdp_session(): can't find media IP in the message ``` #### SIP Traffic ``` v=0 o=xmserver 1726638425 1726638427 IN IP4 169.254.1.1 s=xmserver t=0 0 m=audio 0 RTP/AVP 8 m=image 56002 udptl t38 c=IN IP4 169.254.1.1 a=sendrecv a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxFillBitRemoval:0 a=T38FaxTranscodingMMR:0 a=T38FaxTranscodingJBIG:0 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:200 a=T38FaxMaxDatagram:72 a=T38FaxUdpEC:t38UDPRedundancy ``` ### Possible Solutions ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.8.3 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, MEM_JOIN_FREE, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_SEND_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 ``` * **Operating System**: ``` Debian 12 Linux hostname 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3982 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3982(a)github.com>

3 5

[kamailio/kamailio] Inactive video stream: can't find media IP in the message (Issue #3406)
by schoberw 31 May '25

31 May '25

### Description In some situations the other side UA must reply with an inactive media stream. E.g. if video was added but not supported by the other side. The UAS then must answer with an m=video 0 RTP/.. line. It seams that the video section must contain a c= line with an IP address for rtpengine to function. If there is no c line (no IP address) the SDP body cannot be parsed and thus no RTP proxy is invoked. ### Troubleshooting Not easy to reproduce since the answer must bei "wrong". Is it correct to reply an SDP body (media = video) like this? ``` m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 ``` Maybe not (but Audiocodes SBC lates LTS version does it) - so we are dependent on other side now that this service works. #### Reproduction reInvite with Video to a UA that has no video Support (e.g. Bria -> Snom). Drop the c line in the video part with some textops in 200 OK (just to reproduce of course). A -> B, connect the call A -> + video, B has no video support A presses hold #### Log Messages Incoming 200 OK after doing hold with an inactive video: ``` v=0 o=root 436040161 309284577 IN IP4 1.2.3.5 s=call t=0 0 m=audio 14200 RTP/AVPF 9 8 126 c=IN IP4 1.2.3.5 a=ptime:20 a=recvonly a=mid:0 a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVPF 96 a=label:1 a=inactive a=mid:1 Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: ERROR: <core> [core/parser/sdp/sdp.c:490]: parse_sdp_session(): can't find media IP in the message Mar 27 17:52:22 c5p05es2-1 /usr/sbin/kamailio[2938205]: INFO: <script>: >>> Sending Reply: 200 OK (1.2.3.4:443 -> 100.108.48.38:65251) ``` Compare to working SDP parsing: ``` a=rtpmap:9 G722/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:126 telephone-event/8000 a=fmtp:126 0-15 m=video 0 RTP/AVP 96 c=IN IP4 1.2.3.5 a=inactive a=mid:1 Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ONREPLY_ROUTE[FORWARD] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: ROUTE[RTPP_REPLY] Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > 200 with inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Remove inactive video Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: > Answer to WebRTC client: 200 - qijpuibkv6ufhnd282ks Mar 27 18:00:17 c5p05es2-1 /usr/sbin/kamailio[2942881]: INFO: <script>: >>> Sending Reply: 200 OK (91.237.65.14:443 -> 80.108.48.38:65388) ``` ### Possible Solutions Tried to fix in script: ``` if(sdp_with_media("video")) xlog("L_INFO", "> $rs with video"); if(sdp_with_active_media("video")) xlog("L_INFO", "> $rs with active video"); if(!sdp_with_active_media("video")) xlog("L_INFO", "> $rs with inactive video"); if(sdp_with_media("video") && !sdp_with_active_media("video")) { # try fix for RMT#60189 xlog("L_INFO", "> Remove inactive video"); sdp_remove_media("video"); msg_apply_changes(); # needed? } ``` But since sdpops cannot parse it cannot remove the buggy media, too. See the log: non of the xlog is logging. If there is inactive media the c line is not mandatory. The parser should accept this by adding a default IP of 0.0.0.0, if needed Doing tricks with textops is not a easy nor performant solution to accept this wrong SDP from other parties. ### Additional Information ``` version: kamailio 5.6.4 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 10.2.1 ``` * **Operating System**: Debian Bullseye -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/3406 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/3406(a)github.com>

3 5

[kamailio/kamailio] dispatcher: weight documentation and workaround for limitations (PR #4158)
by Christian Berger 31 May '25

31 May '25

- describe limitation of weight parameter - describe a potential workaround against those limitations  #### Pre-Submission Checklist    - [X] Commit message has the format required by CONTRIBUTING guide - [X] Commits are split per component (core, individual modules, libs, utils, ...) - [X] Each component has a single commit (if not, squash them into one commit) - [X] No commits to README files for modules (changes must be done to docbook files in `doc/` subfolder, the README file is autogenerated) #### Type Of Change - [X] Small bug fix (non-breaking change which fixes an issue) - [ ] New feature (non-breaking change which adds new functionality) - [ ] Breaking change (fix or feature that would change existing functionality) #### Checklist:  - [ ] PR should be backported to stable branches - [X] Tested changes locally - [ ] Related to issue #XXXX (replace XXXX with an open issue number) #### Description  We had problems understanding the weight parameter of the dispatcher module and wrote a little workaround against the problems we have found. This workaround in the configuration file improves behavior for setups with many dispatcher targets at the cost of more CPU load. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/4158 -- Commit Summary -- * dispatcher: weight documentation and workaround for limitations -- File Changes -- M src/modules/dispatcher/doc/dispatcher_admin.xml (28) A src/modules/dispatcher/doc/weights.cfg (49) -- Patch Links -- https://github.com/kamailio/kamailio/pull/4158.patch https://github.com/kamailio/kamailio/pull/4158.diff -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/4158 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/pull/4158(a)github.com>

4 4

[kamailio/kamailio] kafka_send in event_route not work (Issue #4198)
by wangduanduan 31 May '25

31 May '25

wangduanduan created an issue (kamailio/kamailio#4198)  ### Description kafka_send in event_route like tcp:timeout, tcp:closed not work ``` event_route[tcp:closed] { if (kafka_send("my_topic", "tcp:closed")) { xlog("L_INFO", "send success tcp:closed"); } } event_route[tcp:timeout] { if (kafka_send("my_topic", "tcp:timeout")) { xlog("L_INFO", "send success tcp:timeout"); } } ``` in log, its show "send success tcp:closed", "send success tcp:timeout", but in kafka web ui, in the **my_topic**, can't find the "tcp:closed" or " tcp:timeout" message. --- but if the kafka_send in onreply_route, message will be send ok, in the kafka web ui, the "some_route" can be find. ``` onreplay_route[some_route]{ if (kafka_send("my_topic", "some_routet")) { xlog("L_INFO", "send success some_routet"); } } ```  ### Troubleshooting #### Reproduction  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic i use tcpdump to capture the traffic between kamailio and kafka. - when use kafka_send in event_route, no packages captured.  ``` ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` 5.6.1 ``` * **Operating System**: centos7  ``` (paste your output here) ``` -- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/4198 You are receiving this because you are subscribed to this thread. Message ID: <kamailio/kamailio/issues/4198(a)github.com>

5 10

git:master:218de360: modules: readme files regenerated - jansson ... [skip ci]
by Kamailio Dev 30 May '25

30 May '25

Module: kamailio Branch: master Commit: 218de360f439c3ef203f4403b5d06cd7ecca19df URL: https://github.com/kamailio/kamailio/commit/218de360f439c3ef203f4403b5d06cd… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2025-05-30T12:31:11+02:00 modules: readme files regenerated - jansson ... [skip ci] --- Modified: src/modules/jansson/README --- Diff: https://github.com/kamailio/kamailio/commit/218de360f439c3ef203f4403b5d06cd… Patch: https://github.com/kamailio/kamailio/commit/218de360f439c3ef203f4403b5d06cd… --- diff --git a/src/modules/jansson/README b/src/modules/jansson/README index 550c9d62a8d..47a091b8ca6 100644 --- a/src/modules/jansson/README +++ b/src/modules/jansson/README @@ -134,7 +134,7 @@ if(!jansson_get("inner.deep.list[3]", "$var(myjson)", "$var(n)")) { } xlog("L_INFO", "foo is $var(n)"); ... -jansson_get("test", "{\"test\":\"abc\",\"idx\":20}", "$var(n)") +jansson_get("test", "{\"test\":\"abc\",\"idx\":20}", "$var(n)"); ... 3.2. jansson_pv_get(key/path, srcvar, dst)

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev