sr-dev March 2020

sr-dev@lists.kamailio.org

27 participants
473 discussions

[kamailio/kamailio] Active dialog stats stays static on a passive kamailio node that replicates dialogs via DMQ (#1692)
by Joel Serrano 11 Aug '20

11 Aug '20

### Description In a setup with 2 kamailios in active/passive with a virtual IP that failovers between them: sbc01 (active) is handling calls. sbc02 (passive) is started, and does an initial dialog sync via DMQ ``` root@sbc01:~# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 2", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 583", "dialog:processed_dialogs = 2527", root@sbc01:~# ``` ``` root@sbc02:/etc/kamailio# kamctl rpc stats.get_statistics all | grep dialog "dialog:active_dialogs = 39", "dialog:early_dialogs = 0", "dialog:expired_dialogs = 0", "dialog:failed_dialogs = 0", "dialog:processed_dialogs = 0", root@sbc02:/etc/kamailio# ``` >From that point onwards, as long as sbc01 stays as active, sbc02 stays as passive, and no restarts occur anywhere, the values for `dialog` metrics in sbc02 will not change and remain as they are, in the previous example, active_dialogs would remain as 39. ### Troubleshooting This was discovered during some tests from #1591 #### Reproduction Setup 2 kamailio instances that replicate dialogs via DMQ. 1- On Kamailio1 put some traffic to have some active dialogs (must call `dlg_manage()` in routing script for these test calls) 2- Start Kamailio2 3- Compare output of: `kamcmd stats.get_statistics dialog:` on both nodes. 4- Alter the amount of active dialogs on Kamailio1 (either end some or create new ones). 5- Repeat step 3. Kamailio1 --> Step5 will have different values from Step3. Kamailio2 --> Step5 will have exactly the same values from Step3. ### Possible Solutions `dialog:active_dialogs` should remain as 0 on Kamailio2, as technically there are no dialogs being handled by that server, it only has information of replicated dialogs and those stats are available in the `dlg.stats_active` metric. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` # kamailio -V version: kamailio 5.2.0-pre1 (x86_64/linux) 2ecf60-dirty flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 2ecf60 -dirty compiled with gcc 6.3.0 ``` * **Operating System**:  ``` root@sbc02:~# lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.5 (stretch) Release: 9.5 Codename: stretch root@sbc02:~# uname -a Linux sbc02 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux root@sbc02:~# ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1692

2 2

[kamailio/kamailio] t_forward_nonack not decoding/unescaping URI (#2255)
by Julien Chavanton 10 Aug '20

10 Aug '20

### Description SIP OPTION relayed using `t_forward_nonack()` not being URI decoded  ### Troubleshooting #### Reproduction register with PATH and use SIP OPTION keep alive or simply send relay a SIP OPTIONS with a route. #### Debugging Data  ```#1 0x00007fa3067a998f in t_forward_nonack (t=0x7fa3246fce88, p_msg=0x7fa3885aa1c0, proxy=0x0, proto=0) at t_fwd.c:1729 1729 raise(SIGSEGV); (gdb) l 1724 ser_error=MIN_int(lowest_ret, E_CFG); 1725 return -1; 1726 } 1727 if(lowest_ret!=E_CFG) { 1728 LM_ERR("failure to add branches\n"); 1729 raise(SIGSEGV); << raising exception to get the coredump 1730 } 1731 ser_error=lowest_ret; 1732 return lowest_ret; 1733 } ``` #### Log Messages ``` 4(34) ERROR: tm [ut.h:245]: uri2dst2(): bad_uri: sip:247.25.169.51:52307%3Btransport%3Dtls 4(34) ERROR: tm [t_fwd.c:1728]: t_forward_nonack(): failure to add branches ``` ### Possible Solutions This patch can fix the problem from the routing script : ``` if (is_method("OPTIONS") && uri!=myself) { $var(path_uri) = $(hdr(Route){re.subst,/<(.*)>/\1/}); if (defined $(var(path_uri){uri.params}) && $(var(path_uri){uri.params}{param.value,received}) != "") { $var(received) = $(var(path_uri){uri.params}{param.value,received}); if ($var(received) =~ "sip:.*:.*") { $du = $var(received); $avp(received) = $(var(path_uri){uri.params}{param.value,received}); avp_subst("$avp(received)", "/%3Btransport%3Dtcp/;transport=tcp/ig"); if ($avp(received) =~ "sip:.*:.*") { $du = $avp(received); } } t_relay(); } ``` ### Additional Information tested on 5.3.2, something changed during 5.3.0.dev, I will try to pin point the commit -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2255

2 14

[kamailio] Anyone thinking about adding JWT (JSON Web Token) support to Kamailio (#29)
by mading087 24 Jul '20

24 Jul '20

It seems a good idea to support JWT as a new SIP authorization method. Wonder if anyone is interested? Think auth_db would be the best spot to add support for JWT. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/29

12 24

[kamailio/kamailio] 180 Ringing without Contact with TOPOS enabled (#1720)
by Sergey Basov 05 Jun '20

05 Jun '20

### Description Kamailio with TOPOS enabled acts as a proxy between SIP client and SBC. When client sends "180 Ringing" without Contact header - kamailio does not forward it to SBC. If Contact header exists in "180 Ringing" - all works as expected. ### Troubleshooting #### Reproduction Load and configure topos module Make call with "180 Ringing" without Contact header - kamailio will not forward it. #### Log Messages ``` ERROR: topos [tps_storage.c:340]: tps_storage_link_msg(): bad sip message or missing Contact hdr ``` #### SIP Traffic ``` SIP/2.0 180 Ringing Via: SIP/2.0/TLS 1.2.3.4:5061;branch=z9hG4bKef45.8c75f0bae8a59dfaec6ff533ff0f3b2d.0 From: <sip:1111@1.2.3.4:5061>;tag=02000879948559 To: <sip:2.2.2.2@5.6.7.8:5061;transport=tls;user=phone>;tag=SDbsq8499-y2pMOVV Call-ID: apdW7374315131g0bcGhEfDjFof CSeq: 988207425 INVITE User-Agent: agent Supported: replaces, outbound Content-Length: 0 ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.6 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select ``` * **Operating System**: ``` Red Hat Enterprise Linux Server 7.3 3.10.0-514.el7.x86_64 #1 SMP Wed Oct 19 11:24:13 EDT 2016 x86_64 x86_64 x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1720

5 19

[kamailio/kamailio] Configure permissions module without database (#2037)
by Sebastian Damm 25 May '20

25 May '20

### Description In our setup, we try to eliminate setup configuration in database and replace it with files. The advantage is, that we can maintain those files via puppet or ansible, and since we always rewrite the whole file, we don't have to take care about deleting obsolete entries. We can run different Kamailio versions without having problems with the version table when using the same database. And finally, we can stop all those local mysqld processes on a lot of machines. Modules like the dispatcher module were easy to change. But the permissions module is not prepared to run without database, if you want to use `allow_trusted()` or `allow_source_address()` and similar. The only option to feed those functions with data is a database table. ### Expected behavior We would like to place files for trusted and address into the Kamailio directory and have Kamailio read from those files during startup or after reload commands. #### Actual observed behavior Data for trusted and address have to reside inside a database. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2037

3 4

[kamailio/kamailio] Allow more options on dispatcher.set_state (#2085)
by duarterocha91 22 May '20

22 May '20

Greetings, Dispatcher RPC command allows to change the runtime state of a GW using its Group ID and the IP. In my implementation i have 2 Kamailio machines in an HA setup and, as such, i have the GW configured twice with same group_id and different sockets (Different HA adressess - one for each machine). I would like to be able to disable on runtime GWs that are configured with an HA adress that isn't present yet on that machine. To be able do that, the combination of GroupID + IP is not enough, but Socket + IP would be enough. Is this possible to implement ? Best Regards -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2085

2 2

[kamailio/kamailio] error: 'pkg/docker' does not have a commit checked out (#2003)
by Daniel-Constantin Mierla 19 May '20

19 May '20

When I just tried to do a commit today, I got the following error: ``` kamailio $ git ci . error: 'pkg/docker' does not have a commit checked out fatal: updating files failed ``` It is related to the `pkg/docker` submodule referencing to kamailio/kamailio-ci. Not sure if this is due to a new git version or something else, because I did commits in that folder a few days ago. To get is sorted out, I did: ``` kamailio $ git submodule update pkg/docker Submodule path 'pkg/docker' not initialized Maybe you want to use 'update --init'? kamailio $ git submodule update --init pkg/docker Submodule 'pkg/docker' (https://github.com/kamailio/kamailio-ci.git) registered for path 'pkg/docker' Cloning into '/.../kamailio/pkg/docker'... Submodule path 'pkg/docker': checked out 'b92a1c899b8c474afadd0cf29dd7cb4ea01a3466' ``` Then it worked to do the commit. I wonder if this is going to break the process we were used with, specially the installation guidelines from GIT repo. Therefore I open this item to see if we really need the to have `pkg/docker` submodule, or better have the docker files directly in the repo. Other options to keep things sane and simple? Git version: ``` $ git --version git version 2.22.0 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2003

5 10

possible bug on kemi dlg_ontimeout
by David Escartin 15 May '20

15 May '20

Hello all Testing dialog timeout event callback for kemi lua setup on kamailio 5.4.0-dev3 (x86_64/linux) d74157-dirty, i had some problems to perform the dlg timeroute behaviour the same as we could on native version. If i used KSR.dialog.var_sets to set $dlg_ctx(timeout_route), I saw that on a dialog timeout, the dlg_ontimeout event route was not triggered, and only the dialog callback was executed with evname dialog:end. (only executing event_route -1 on state 5) So i'm guessing that the kemi dialog var_sets is for $dlg_var only (¿?) Anycase, If i used KSR.pv.sets, i saw the kamailio was crashing ..... 16(5579) DEBUG: dialog [dlg_hash.c:1013]: dlg_ref_helper(): ref dlg 0x7f9a961f5f90 with 1 -> 3 16(5579) DEBUG: dialog [dlg_handlers.c:1589]: dlg_ontimeout(): executing route -1 on timeout 22(5645) CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 8 22(5645) DEBUG: <core> [core/tcp_main.c:3762]: handle_ser_child(): dead child 16, pid 5579 (shutting down?) .... Adding some debug, i could see that the call was not attempting the kemi function of line 1598 of dlg_handlers.c, and was trying the code i think was for native on line 1593. We think the issue is that the toroute is defined as unsigned dlg_hash.h: unsigned int toroute; /*!< index of route that is executed on timeout */ but after that when setting $dlg_ctx(timeout_route) with pv module, it tries to compare an integer being unsigned, so it's always true and never uses kemi with this change we made it work + if ((int)(dlg->toroute) > 0) { + /*if(dlg->toroute>0) {*/ but i don't know maybe there is a better way to do it. best regards david

2 5

[kamailio/kamailio] Debian package version don't support distribution upgrades (#2160)
by Bas Couwenberg 14 May '20

14 May '20

When upgrading from stretch to buster the kamailio packages aren't upgraded because the 5.3.1+stretch version is greater than 5.3.1+buster: ``` $ dpkg --compare-versions 5.3.1+stretch gt 5.3.1+buster ; echo $? 0 ``` The package version should include the release version instead of its codename, e.g. 5.3.1+deb9u1 & 5.3.1+deb10u1 like done for [stable updates](https://www.debian.org/doc/manuals/developers-reference/pkgs.en.ht…: ``` $ dpkg --compare-versions 5.3.1+deb10u1 gt 5.3.1+deb9u1 ; echo $? 0 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2160

3 5

[kamailio/kamailio] support pkg-config when detecting libxml2 (#2199)
by Victor Seva 11 May '20

11 May '20

>From https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=949521: > your package is using `xml2-config` to detect and use libxml2. I'm removing that script, so please update your build system to use pkg-config instead. > >Additionally, your package is not failing to build, so it's creating binaries that are not linked against libxml2 anymore: -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/2199

4 12

← Newer
1
...
6
7
8
9
10
11
12
...
48
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev March 2020