sr-dev October 2019

sr-dev@lists.kamailio.org

22 participants
436 discussions

[kamailio/kamailio] kamailio can't support send Rx_AAR for origin call (#1793)
by lsm808 11 Jan '22

11 Jan '22

Hi All, When kamailio(kamailio-5.0) receive 200 OK message, we need to send Rx_AAR for origin and term call. Rx_AAR("MT_aar_reply", "origin","",2); for origin call Rx_AAR("MT_aar_reply", "term","",2); for term call. But from source code ims_qos_mod.c, we see lots of part like below to not support for a request. Even we comments them, there are still lots of issues, could we support the scenarios like below: when kamailio receive 200 OK, we can send Rx_AAR for term and origin call. //We don't ever do AAR on request for calling scenario... if (msg->first_line.type != SIP_REPLY) { // Added by vlv // LM_DBG("Can't do AAR for call session in request\n"); // return result; } -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1793

2 4

[kamailio/kamailio] while passing different callid then actual for rtpengine_offer, rtpengine_answer and rtpengine_delete, rtpstats will not populate the stastics of rtpengine (#1788)
by Surendra Tiwari 11 Jan '22

11 Jan '22

### Description  ### Troubleshooting #### Reproduction  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` (paste your output here) ``` * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1788

2 4

[kamailio/kamailio] siptrace: option ping from nathelper do not get duplicated (#1722)
by Roman Dissauer 11 Jan '22

11 Jan '22

### Description when using kamailio with mod siptrace in trace mode, option pings from nathelper module and tls encrypted packets do not get duplicated ### Troubleshooting #### Reproduction  version: kamailio 5.1.6 (x86_64/linux) modparam("nathelper", "ping_nated_only", 0) modparam("siptrace", "trace_mode", 1) modparam("siptrace", "duplicate_uri", "sip:10.1.1.1:5888") when listening on sip:10.1.1.1:5888 all the duplicated sip packets arrive except option pings from nathelper and tls encrypted traffic (which should then be already decrypted by kamailio) ### Possible Solutions  seems that core triggers are not evaluated when using tls or nathelper option pings ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.6 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 ``` * **Operating System**:  ``` Linux AT1LKAM04 4.9.0-8-amd64 #1 SMP Debian 4.9.110-3+deb9u6 (2018-10-08) x86_64 GNU/Linux ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1722

3 8

[kamailio/kamailio] evapi: if there is no evapi clients are connected to kamailio, evapi trying to send data. (#1700)
by Surendra Tiwari 11 Jan '22

11 Jan '22

### Description right now, evapi module trying to send data even if no clients are connected .in the case new transaction is created and even suspended also. kamailio should not create the transaction if no evapi client is connected to kamailio.  ### Troubleshooting #### Reproduction  #### Debugging Data  ``` (paste your debugging data here) ``` #### Log Messages  ``` (paste your log messages here) ``` #### SIP Traffic  ``` (paste your sip traffic here) ``` ### Possible Solutions  ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` (paste your output here) ``` * **Operating System**:  ``` (paste your output here) ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1700

2 3

[kamailio/kamailio] Feature request: Increase number of "custom fields" in sipcapture-module (#1278)
by mihovilkolaric 11 Jan '22

11 Jan '22

The module sipcapture provides the modparams "custom_field1_header" to "custom_field3_header", to store the content of up to three arbitrary header fields as separate columns in the database. They can be used as all other "standard" columns in homer. However I found out that searching/filtering for even more (standardized, as well as private) header fields would be very helpful (I identified about ten interesting additional headers, but the number is constantly increasing ;-) ). Could you thus please increase the number of custom fields? (I suppose the most flexible solution could be something as the db_extra in the acc-module, which is not fixed to certain columns (regarding number of columns, as well as their names) (see https://www.kamailio.org/docs/modules/5.0.x/modules/acc.html#acc.p.db_extra ).) -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1278

2 2

[kamailio/kamailio] Diameter AVP handling from kamailio.cfg (#922)
by miricz 11 Jan '22

11 Jan '22

Below feature were discussed with Carsten Bock Currently Diameter AVP values and especially Experimental Result Code is not available from the kamailio.cfg Therefore I would like to request such kind of feature. I would like to use it mainly on Cx interface for Server-Assignment-Answer (SAA), Location-Info-Answer (LIA), Multimedia-Auth-Answer (MAA), Push-Profile-Answer (PPA) It should be implemented such a way like in the ims_charging module. Thank you very much in advance! _Cheers, Zoltan_ -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/922

2 2

[kamailio] add socket activation support (#293)
by zabbal 11 Jan '22

11 Jan '22

Having (optional) support for socket activation in Kamailio would bring several benefits: * Security: systemd can listen on privileged ports or socket paths and start Kamailio with privileges already dropped. * Major upgrades or reconfigurations of Kamailio requiring a full restart are possible without having the listening socket(s) ever go away. * Any service dependent on Kamailio doesn't have to wait for it to finish starting (or start at all). --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/293

3 4

[kamailio/kamailio] pv needed to get access to X509v3 Subject Alternative Names of peer's SSL certificate (#707)
by juha-h 11 Jan '22

11 Jan '22

A sip proxy may serve many domains listed in its SSL certificate X509v3 Subject Alternative Name field. In order to find out if a peer sip proxy is serving a particular domain, access would be needed in config file to this list of domains. --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/707

4 4

[kamailio/kamailio] TLS module: access UID attribute (#1843)
by Sebastian Denz 24 Nov '21

24 Nov '21

### Description While implementing an edgeproxy based on kamailio i have to add a custom SIPHeader which contains the uid from the useragents client certificate. The UID is part of the subject like: O = Company CN = Sebastian Denz UID = denz But i cant access that attribute. All i can do is reading the CN and O. ### Expected behavior There should be a select to access the uid Attribute from the subject, or at least a select which returns the whole subject, so it can be parsed manually in kamailio.cfg. #### Actual observed behavior It is only possible to access the O and CN field from the subject. ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` kamailio -v version: kamailio 5.2.0 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144 MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 5.3.1 ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1843

4 24

[kamailio/kamailio] topos module producing invalid SIP message (missing Via header) when handling 200 OK to OPTIONS request (#1350)
by George Diamantopoulos 20 Oct '21

20 Oct '21

Hello all, I've come across the following issue with topos on Kamailio 5.1.0-rc2. ### Description Kamailio acts as a proxy for asterisk instances residing in a private IP range. Asterisk's peers are configured with their public IP address or hostname, but asterisk will dispatch requests to them to kamailio instead (because kamailio's IP is set in outboundproxy option in peer definition). This works fine for INVITEs, but if qualify=yes is set for the peer, asterisk will send out OPTIONs to monitor these peers. If the topos module is loaded, 200 OK replies to these OPTIONs will be malformed when forwarded from kamailio to asterisk (no Via header present). Disabling the topos module will resolve this. ### Troubleshooting #### Reproduction Configure a peer in asterisk with outboundproxy option set to kamailio's IP address. Set qualify=yes. Adjust kamailio's default configuration so that OPTIONs to other hosts besides itself are routed. Change the following section in request_route: ``` if ($rU==$null) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } ``` to: ``` if ( ($rU==$null) && !(is_method("OPTIONS")) ) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # Permit asterisk's monitoring using options if(is_method("OPTIONS") && uri!=myself) { route(RELAY); } ``` Enable and configure the topos module with database. #### SIP Traffic asterisk:5060 -> kamailio:5060 ``` OPTIONS sip:peer.domain.tld SIP/2.0 Via: SIP/2.0/UDP asterisk:5060;branch=z9hG4bK460330cf;rport Max-Forwards: 70 From: "asterisk" <sip:asterisk@domain.tld>;tag=as690c2406 To: <sip:peer.domain.tld> Contact: <sip:asterisk@asterisk:5060> Call-ID: 6548f43b2d8740122186bb0c6e72ac78(a)domain.tld CSeq: 102 OPTIONS User-Agent: myUA Date: Sun, 03 Dec 2017 00:39:38 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Content-Length: 0 ``` kamailio:5060 -> peer:5060 ``` OPTIONS sip:peer.domain.tld SIP/2.0 Via: SIP/2.0/UDP kamailio:5060;branch=z9hG4bK460330cf;rport Max-Forwards: 69 From: "asterisk" <sip:asterisk@domain.tld>;tag=as690c2406 To: <sip:peer.domain.tld> Contact: <sip:asterisk@asterisk:5060> Call-ID: 6548f43b2d8740122186bb0c6e72ac78(a)domain.tld CSeq: 102 OPTIONS User-Agent: myUA Date: Sun, 03 Dec 2017 00:39:38 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Content-Length: 0 ``` peer:5060 -> kamailio:5060 ``` SIP/2.0 200 OK Via: SIP/2.0/UDP kamailio;branch=z9hG4bKda8d.cc03bd2def8ad36e8c43f61ab31a636f.0;received=kamailio;rport=5060 From: "asterisk" <sip:asterisk@domain.tld>;tag=as690c2406 To: <sip:peer.domain.tld>;tag=as472874ee Call-ID: 6548f43b2d8740122186bb0c6e72ac78(a)domain.tld CSeq: 102 OPTIONS Server: myUA Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Contact: <sip:peer:5060> Accept: application/sdp Content-Length: 0 ``` **kamailio:5060 -> asterisk:5060: Missing Via Header** ``` SIP/2.0 200 OK From: "asterisk" <sip:asterisk@domain.tld>;tag=as690c2406 To: <sip:peer.domain.tld>;tag=as472874ee Call-ID: 6548f43b2d8740122186bb0c6e72ac78(a)domain.tld CSeq: 102 OPTIONS Server: myUA Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces, timer Contact: <sip:peer:5060> Accept: application/sdp Content-Length: 0 ``` ### Additional Information * **Kamailio Version** - output of `kamailio -v` ``` version: kamailio 5.1.0-rc2 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 ``` * **Operating System**: ``` Debian 9.1 ``` * **Other pertinent configuration information**: This kamailio box has several network interfaces. mhomed is not used, instead force_send_socket is called where necessary. I'm mentioning this in case it's what might trigger this issue with topos. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1350

4 18

← Newer
1
2
3
4
5
6
7
8
...
44
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev October 2019