sr-dev June 2017

sr-dev@lists.kamailio.org

28 participants
389 discussions

[kamailio/kamailio] Wishlist #234: URI transformation to pick up URI scheme (#592)

by Olle E. Johansson

I would like the URI transformations to be more generic so one can pick up the URI scheme, like HTTP: or TEL: Just an idea --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/592

6 years, 9 months

[kamailio/kamailio] Do not start Kamailio if no listener address is configured (#1098)

by Sarbyn

### Description During some test on my server I forgot to configure a valid listen network address. It's my fault but Kamailio crashed with a useless message: > kamailio[4739]: segfault at 0 ip 00007f022ede5e71 sp 00007fff94033f08 error 4 in libc-2.17.so[7f022ec82000+1b6000 I think it's better to abort the startup if no listen address is specified and with an explicit error message, instead of produce a segfault and a crash without any error -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1098

6 years, 9 months

[kamailio/kamailio] topos: fix PRACK message handling (#1097)

by sergey-vb

Currently PRACK was not handling properly because topos_d.b_contact field are filling only after receiving 200 OK. But PRACK is sending to 183 Progress responce. So I sink that we must filled topos_d.b_contact field after receiving 183 Progress. You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/1097 -- Commit Summary -- * topos: fix PRACK message handling -- File Changes -- M src/modules/topos/tps_storage.c (4) -- Patch Links -- https://github.com/kamailio/kamailio/pull/1097.patch https://github.com/kamailio/kamailio/pull/1097.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/1097

6 years, 9 months

[kamailio/kamailio] Kamailio 5.0.2 suddenly stops processing traffic, then generates a core when restarting. (#1172)

by Joel Serrano

### Description Kamailio suddenly stops working (this is a production server so debug logging is disabled), when we restart it a core is generated and a segfault is logged. ### Troubleshooting The only thing I have seen is some reference to IPv6 in the backtrace. But no idea where to start looking. I'm pretty sure we will need more information, but I don't know how to read or understand backtraces, please let me know what you see in it so I can dig deeper into this problem. #### Reproduction I don't know how to reproduce yet, first I have to understand the cause. #### Debugging Data Backtrace: ``` [New LWP 12052] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -P /var/run/kamailio/kamailio.pid -f /etc/kamailio/sbc.cfg -'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007efcf3b5df69 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 #0 0x00007efcf3b5df69 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. #1 0x00007efcf3b5e234 in OPENSSL_cleanup () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. #2 0x00007efcf7721910 in __run_exit_handlers (status=0, listp=0x7efcf7a855d8 <__exit_funcs>, run_list_atexit=run_list_atexit@entry=true, run_dtors=run_dtors@entry=true) at exit.c:83 atfct = <optimized out> onfct = <optimized out> cxafct = <optimized out> f = <optimized out> #3 0x00007efcf772196a in __GI_exit (status=<optimized out>) at exit.c:105 No locals. #4 0x000055f0a9483d54 in handle_sigs () at main.c:699 chld = 845005216 chld_status = 845005248 any_chld_stopped = 32766 memlog = 0 __func__ = "handle_sigs" #5 0x000055f0a948ea43 in main_loop () at main.c:1758 i = 8 pid = 12091 si = 0x0 si_desc = "udp receiver child=7 sock=[2602:FF37:0:1:0:0:C601:377A]:5060\000\367v\215\200\262+\363\372~\000\000\025\067\236\003\000\000\000\000\300\017H\251\360U\000\000\340\305]2\376\177", '\000' <repeats 18 times>, "\020\303]2\376\177\000\000a\202g\251\360U\000" nrprocs = 8 woneinit = 1 __func__ = "main_loop" #6 0x000055f0a9494fb9 in main (argc=13, argv=0x7ffe325dc5e8) at main.c:2646 cfg_stream = 0x55f0aa7fb010 c = -1 r = 0 tmp = 0x7ffe325dceb6 "" tmp_len = -133383536 port = 32508 proto = 845006016 options = 0x55f0a97d80e8 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 3679304743 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x0 p = 0xffffffff <error: Cannot access memory at address 0xffffffff> st = {st_dev = 19, st_ino = 14769, st_nlink = 2, st_mode = 16832, st_uid = 109, st_gid = 113, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1498523393, tv_nsec = 731915583}, st_mtim = {tv_sec = 1498533865, tv_nsec = 274210743}, st_ctim = {tv_sec = 1498533865, tv_nsec = 274210743}, __glibc_reserved = {0, 0, 0}} __func__ = "main" ``` Info locals: ``` [New LWP 12052] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -P /var/run/kamailio/kamailio.pid -f /etc/kamailio/sbc.cfg -'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007efcf3b5df69 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 No symbol table info available. ``` List: ``` [New LWP 12052] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -P /var/run/kamailio/kamailio.pid -f /etc/kamailio/sbc.cfg -'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007efcf3b5df69 in ?? () from /usr/lib/x86_64-linux-gnu/libcrypto.so.1.1 ``` #### Log Messages We have regular logging with no issues, then suddenly we get: ``` Jun 28 01:57:51 kam-1 sbc[12075]: WARNING: <script>: [DISPATCHER] - Destination down: OPTIONS sip:A.A.A.A:5060 (<null>) Jun 28 01:57:51 kam-1 sbc[12075]: WARNING: <script>: [DISPATCHER] - Destination down: OPTIONS sip:B.B.B.B:5060 (<null>) Jun 28 01:58:40 kam-1 sbc[12076]: NOTICE: <script>: Node unavailable, trying next sip:A.A.A.A:5060 - M=INVITE R=sip:+12345678900@A.A.A.A:5060 ID=334f3vqDtj Jun 28 01:58:40 kam-1 sbc[12076]: NOTICE: <script>: Forwarding request - M=INVITE R=sip:+12345678900@A.A.A.A:5060 ID=334f3vqDtj Jun 28 01:58:55 kam-1 sbc[12075]: WARNING: dialog [dlg_handlers.c:1574]: dlg_ontimeout(): timeout for dlg with CallID '00g4gNy5KZ' and tags 'FHmrD-CM3' 'SZ3a5Sg58c5pB' Jun 28 01:58:55 kam-1 sbc[12075]: WARNING: dialog [dlg_handlers.c:1574]: dlg_ontimeout(): timeout for dlg with CallID 'Kj7uLRzJfd' and tags 'wRSVjfGaT' 'yQHvjNaZ5Z3rc' Jun 28 01:58:55 kam-1 sbc[12075]: WARNING: dialog [dlg_handlers.c:1574]: dlg_ontimeout(): timeout for dlg with CallID 'S5QUIXtS6-' and tags 'FV4ySEouz' 'eS7F910ycNg8H' Jun 28 01:59:10 kam-1 sbc[12075]: ERROR: <script>: No available gateways - M=INVITE R=sip:+12345678900@B.B.B.B:5060 ID=334f3vqDtj Jun 28 02:01:45 kam-1 sbc[12080]: NOTICE: dialog [dlg_hash.c:248]: dlg_clean_run(): dialog in delete state is too old (0x7efaf3904008 ref 1) Jun 28 02:03:15 kam-1 sbc[12080]: NOTICE: dialog [dlg_hash.c:248]: dlg_clean_run(): dialog in delete state is too old (0x7efaf40f0f50 ref 1) Jun 28 02:04:45 kam-1 sbc[12080]: NOTICE: dialog [dlg_hash.c:248]: dlg_clean_run(): dialog in delete state is too old (0x7efaf4d92108 ref 1) Jun 28 02:55:59 kam-1 sbc[12071]: INFO: <core> [main.c:823]: sig_usr(): signal 15 received Jun 28 02:55:59 kam-1 sbc[12052]: NOTICE: <core> [main.c:696]: handle_sigs(): Thank you for flying kamailio!!! ``` NOTE: The process stops logging at 02:04:45, then at 02:55:59 we manually restart kamailio and a core is generated. Also, in `dmesg` we have: ``` [138953.744199] kamailio[12052]: segfault at 7efaf32f51b8 ip 00007efcf3b5df69 sp 00007ffe325dc0c0 error 4 in libcrypto.so.1.1[7efcf39f6000+265000] ``` #### SIP Traffic I don't have sip traffic, If required I can start capturing it. ### Additional Information ``` # kamailio -v version: kamailio 5.0.2 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 6.3.0 # ``` ``` # dpkg -l | grep kamailio ii kamailio 5.0.2+stretch amd64 very fast, dynamic and configurable SIP server ii kamailio-dbg:amd64 5.0.2+stretch amd64 very fast and configurable SIP server [debug symbols] ii kamailio-extra-modules:amd64 5.0.2+stretch amd64 Extra modules for the Kamailio SIP Server ii kamailio-tls-modules:amd64 5.0.2+stretch amd64 TLS support for the Kamailio SIP server (authentication, transport) # ``` ``` # dpkg -l |grep libssl ii libssl1.0.2:amd64 1.0.2l-2 amd64 Secure Sockets Layer toolkit - shared libraries ii libssl1.1:amd64 1.1.0f-3 amd64 Secure Sockets Layer toolkit - shared libraries# ``` * **Operating System**: ``` # uname -a Linux kam-1 4.9.0-3-amd64 #1 SMP Debian 4.9.30-2+deb9u1 (2017-06-18) x86_64 GNU/Linux ``` ``` # lsb_release -a No LSB modules are available. Distributor ID: Debian Description: Debian GNU/Linux 9.0 (stretch) Release: 9.0 Codename: stretch # ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/1172

6 years, 9 months

[kamailio/kamailio] pkg/kamailio: Fixed systemd unit failure on server boot (#1148)

by sergey-safarov

You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/1148 -- Commit Summary -- * pkg/kamailio: Fixed systemd unit failure on server boot -- File Changes -- M pkg/kamailio/centos/7/kamailio.service (4) M pkg/kamailio/fedora/17/kamailio.service (4) -- Patch Links -- https://github.com/kamailio/kamailio/pull/1148.patch https://github.com/kamailio/kamailio/pull/1148.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/1148

6 years, 9 months

[kamailio/kamailio] pkg/kamailio: Fix of ticket 1085 (#1087)

by sergey-safarov

You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/1087 -- Commit Summary -- * pkg/kamailio: Fix of ticket 1085 -- File Changes -- M pkg/kamailio/centos/7/kamailio.service (2) M pkg/kamailio/deb/debian/kamailio.service (2) M pkg/kamailio/deb/jessie/kamailio.service (2) M pkg/kamailio/deb/sid/kamailio.service (2) M pkg/kamailio/deb/stretch/kamailio.service (2) M pkg/kamailio/deb/xenial/kamailio.service (2) M pkg/kamailio/fedora/17/kamailio.service (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/1087.patch https://github.com/kamailio/kamailio/pull/1087.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/1087

6 years, 9 months

[kamailio] PID file permissions (#231)

by Arsen

ENV: Debian 8 So on most Linux systems the /var/run folder is a tmpfs and after which clears after each reboot As I try to start up kamailio after a reboot through kamctl I get the following error. "ERROR: PID file /var/run/kamailio.pid does not exist -- Kamailio start failed" Because kamailio does not have the permission to write to the /var/run folder as the kamailio user. Would it be possible to add in the "kamctl" code a section where the SPECIFIED PID LOCATION (/var/run/kamailio) is checked and if it does not exist create it as the root user and chown it to the SPECIFIED USER (kamailio)? The way I have patched it for now is to create a init script that creates a /var/run/kamailio folder and chmods it to kamailio:kamailio Thanks everyone! --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/231

6 years, 9 months

Developing charging module for kamailio-ims

by Prasannakumar Merugu

Hi all, We are developing charging module for kamailio-ims. We need events event_route[dialog:start] event_route[dialog:end] for detecting call begin and call end. We have to use ims_dialog module for IMS implementation. But observed that ims_dialog module doesnt have the above said events [dialog:start and end]. How do we implement those events using ims_dialog. Is there any other way out. Kindly suggest. Thanks, Prasannakumar Merugu.

6 years, 10 months

git:master:8a6f57f5: modules: readme files regenerated - http_client ... [skip ci]

by Kamailio Dev

Module: kamailio Branch: master Commit: 8a6f57f59963e53bcf98dd39615db3980275d81b URL: https://github.com/kamailio/kamailio/commit/8a6f57f59963e53bcf98dd39615db39… Author: Kamailio Dev <kamailio.dev(a)kamailio.org> Committer: Kamailio Dev <kamailio.dev(a)kamailio.org> Date: 2017-06-30T15:31:22+02:00 modules: readme files regenerated - http_client ... [skip ci] --- Modified: src/modules/http_client/README --- Diff: https://github.com/kamailio/kamailio/commit/8a6f57f59963e53bcf98dd39615db39… Patch: https://github.com/kamailio/kamailio/commit/8a6f57f59963e53bcf98dd39615db39… --- diff --git a/src/modules/http_client/README b/src/modules/http_client/README index 7ee2d2f693..7f5718db5c 100644 --- a/src/modules/http_client/README +++ b/src/modules/http_client/README @@ -65,7 +65,7 @@ Hugh Waite result) 4.2. http_get_redirect(connection, result) - 4.3. http_client_query(url, [post-data], result) + 4.3. http_client_query(url, [post-data], [hdrs], result) 5. Pseudovariables @@ -117,7 +117,7 @@ Hugh Waite 1.18. Short http_client config file 1.19. http_connect() usage 1.20. http_get_redirect() usage - 1.21. curl_http_query() usage + 1.21. http_client_query() usage Chapter 1. Admin Guide @@ -153,7 +153,7 @@ Chapter 1. Admin Guide 4.1. http_connect(connection, url, [content_type, data,] result) 4.2. http_get_redirect(connection, result) - 4.3. http_client_query(url, [post-data], result) + 4.3. http_client_query(url, [post-data], [hdrs], result) 5. Pseudovariables @@ -609,7 +609,7 @@ http_follow_redirect = no 4.1. http_connect(connection, url, [content_type, data,] result) 4.2. http_get_redirect(connection, result) - 4.3. http_client_query(url, [post-data], result) + 4.3. http_client_query(url, [post-data], [hdrs], result) 4.1. http_connect(connection, url, [content_type, data,] result) @@ -667,7 +667,7 @@ modparam("http_client", "httpredirect", 1); http_get_redirect("apiserver", "$var(targeturl)"); ... -4.3. http_client_query(url, [post-data], result) +4.3. http_client_query(url, [post-data], [hdrs], result) Sends HTTP GET or POST request according to URL given in “url” parameter, which is a string that may contain pseudo variables. @@ -675,6 +675,12 @@ http_get_redirect("apiserver", "$var(targeturl)"); If you want to make a POST-Request, you have to define the “post”-data, that should be submitted in that request as the second parameter. + Custom headers may be specified via “hdrs” parameter (e.g., + Content-Type). + + Either of “post-data” or “hdrs” can be also set to empty string in + order to be ignored. + If HTTP server returns a class 2xx, 3xx or 4xx reply, the first line of the reply's body (if any) is stored in “result” parameter, which must be a writable pseudo variable. @@ -689,25 +695,26 @@ http_get_redirect("apiserver", "$var(targeturl)"); utils module. It is changed to use the same base library and settings as the rest of the functions in this module. - Example 1.21. curl_http_query() usage + Example 1.21. http_client_query() usage ... # GET-Request http_client_query("http://api.com/index.php?r_uri=$(ru{s.escape.param})&f_uri=$( fu{s.escape.param})", "$var(result)"); -switch ($retcode) { - ... +switch ($rc) { + ... } ... -... # POST-Request -http_client_query("http://api.com/index.php", "r_uri=$(ru{s.escape.param})&f_uri -=$(fu{s.escape.param})", - "$var(result)"); -switch ($retcode) { - ... +http_client_query("http://api.com/index.php", + "r_uri=$(ru{s.escape.param})&f_uri=$(fu{s.escape.param})", + "$var(result)"); } ... +# POST-Request +http_client_query("http://api.com/index.php", "src=$si", + "Content-Type: text/plain", "$var(result)"); +... 5. Pseudovariables

6 years, 10 months

git:master:279e622b: http_client: updated docs for http_client_query()

by Daniel-Constantin Mierla

Module: kamailio Branch: master Commit: 279e622b53b636d49b207907c8f3fe60ff9e2cd3 URL: https://github.com/kamailio/kamailio/commit/279e622b53b636d49b207907c8f3fe6… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: 2017-06-30T15:17:46+02:00 http_client: updated docs for http_client_query() --- Modified: src/modules/http_client/doc/http_client_admin.xml --- Diff: https://github.com/kamailio/kamailio/commit/279e622b53b636d49b207907c8f3fe6… Patch: https://github.com/kamailio/kamailio/commit/279e622b53b636d49b207907c8f3fe6… --- diff --git a/src/modules/http_client/doc/http_client_admin.xml b/src/modules/http_client/doc/http_client_admin.xml index 799f47718a..9ea4f9ef3f 100644 --- a/src/modules/http_client/doc/http_client_admin.xml +++ b/src/modules/http_client/doc/http_client_admin.xml @@ -10,9 +10,9 @@  <chapter> - + <title>&adminguide;</title> - + <section> <title>Overview</title> <para> @@ -31,7 +31,7 @@ <para> The connections can either be defined with the "httpcon" module parameter or in a separate configuration file, as specified by the "config_file" module - parameter. + parameter. </para> <para> Like in SIP, the HTTP URL may need encoding to be transported safely @@ -711,21 +711,29 @@ http_get_redirect("apiserver", "$var(targeturl)"); </programlisting> </example> </section> - <section id="http_client.f.curl_http_query"> + <section id="http_client.f.http_query"> <title> - <function moreinfo="none">http_client_query(url, [post-data], result)</function> + <function moreinfo="none">http_client_query(url, [post-data], [hdrs], result)</function> </title> <para> Sends HTTP GET or POST request according to URL given in <quote>url</quote> parameter, which is a string that may contain pseudo variables. - </para> + </para> <para> If you want to make a POST-Request, you have to define the <quote>post</quote>-data, that should be submitted in that request as the second parameter. - </para> - <para> + </para> + <para> + Custom headers may be specified via <quote>hdrs</quote> parameter + (e.g., Content-Type). + </para> + <para> + Either of <quote>post-data</quote> or <quote>hdrs</quote> can be + also set to empty string in order to be ignored. + </para> + <para> If HTTP server returns a class 2xx, 3xx or 4xx reply, the first line of the reply's body (if any) is stored in <quote>result</quote> parameter, @@ -734,7 +742,7 @@ http_get_redirect("apiserver", "$var(targeturl)"); <para> Function returns reply code of HTTP reply or -1 if something went wrong. - </para> + </para> <para> This function can be used from REQUEST_ROUTE, ONREPLY_ROUTE, FAILURE_ROUTE, and BRANCH_ROUTE. @@ -744,26 +752,26 @@ http_get_redirect("apiserver", "$var(targeturl)"); It is changed to use the same base library and settings as the rest of the functions in this module. </para> <example> - <title><function>curl_http_query()</function> usage</title> + <title><function>http_client_query()</function> usage</title> <programlisting format="linespecific"> ... # GET-Request http_client_query("http://api.com/index.php?r_uri=$(ru{s.escape.param})&f_uri=$(fu{s.escap…", "$var(result)"); -switch ($retcode) { - ... +switch ($rc) { + ... } ... - </programlisting> - <programlisting format="linespecific"> -... # POST-Request -http_client_query("http://api.com/index.php", "r_uri=$(ru{s.escape.param})&f_uri=$(fu{s.escape.param})", - "$var(result)"); -switch ($retcode) { - ... +http_client_query("http://api.com/index.php", + "r_uri=$(ru{s.escape.param})&f_uri=$(fu{s.escape.param})", + "$var(result)"); } ... +# POST-Request +http_client_query("http://api.com/index.php", "src=$si", + "Content-Type: text/plain", "$var(result)"); +... </programlisting> </example> </section>

6 years, 10 months

← Newer
1
...
4
5
6
7
8
9
10
...
39
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev June 2017