sr-dev September 2016

sr-dev@lists.kamailio.org

29 participants
319 discussions

[kamailio/kamailio] dialog: crash when trying to print error info (#807)

by Victor Seva

``` Reading symbols from kamailio...Reading symbols from /usr/lib/debug/.build-id/10/824757bd1066806f2e19310929e17a9009a991.debug...done. done. [New LWP 5578] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/proxy/kamailio.cfg -P /var/run/kamailio/kam'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007f4871c9adcc in vfprintf () from /lib/x86_64-linux-gnu/libc.so.6 (gdb) bt #0 0x00007f4871c9adcc in vfprintf () from /lib/x86_64-linux-gnu/libc.so.6 #1 0x00007f4871d34466 in __vsyslog_chk () from /lib/x86_64-linux-gnu/libc.so.6 #2 0x00007f4871d345bf in syslog () from /lib/x86_64-linux-gnu/libc.so.6 #3 0x00007f485b71d796 in dlg_onroute (req=0x7f4866d8e5f0, route_params=0x7fffff82, param=0x7ffceb21fd60) at dlg_handlers.c:1336 #4 0x00007f48632aa2cd in run_rr_callbacks (req=0x7f4866d8e5f0, rr_param=0x7f48634bd8d0 <routed_params>) at rr_cb.c:96 #5 0x00007f486329e051 in after_loose (_m=0x7f4866d8e5f0, preloaded=2) at loose.c:914 #6 0x0000000000446700 in do_action (h=0x7ffceb220830, a=0x7f4865d1f1a0, msg=0x7f4866d8e5f0) at action.c:1060 #7 0x00000000004451c5 in run_actions (h=0x6, h@entry=0x7ffceb220830, a=0x7fffff82, msg=0x7ffceb21fd60) at action.c:1549 #8 0x0000000000451b97 in run_actions_safe (h=0x7ffceb221b00, a=<optimized out>, msg=<optimized out>) at action.c:1614 #9 0x0000000000426d20 in rval_get_int (h=0x7ffceb221b00, msg=0x6, i=0x7ffceb220b60, rv=0xffffffffffffffff, cache=0x6) at rvalue.c:912 #10 0x000000000042caac in rval_expr_eval_int (h=0x7ffceb221b00, msg=0x7f4866d8e5f0, res=0x7ffceb220b60, rve=0x7f4865d1f2d0) at rvalue.c:1910 #11 0x0000000000446bd7 in do_action (h=0x7ffceb221b00, a=0x7f4865d6c508, msg=0x7f4866d8e5f0) at action.c:1030 #12 0x00000000004451c5 in run_actions (h=0x6, a=0x7fffff82, msg=0x7ffceb21fd60) at action.c:1549 #13 0x0000000000446df0 in do_action (h=0x7ffceb221b00, a=0x7f4866624370, msg=0x7f4866d8e5f0) at action.c:678 #14 0x00000000004451c5 in run_actions (h=0x6, a=0x7fffff82, msg=0x7ffceb21fd60) at action.c:1549 #15 0x0000000000446c28 in do_action (h=0x7ffceb221b00, a=0x7f4866cbbe10, msg=0x7f4866d8e5f0) at action.c:1049 #16 0x00000000004451c5 in run_actions (h=0x6, h@entry=0x7ffceb221b00, a=0x7fffff82, a@entry=0x7f4866c6a758, msg=0x7ffceb21fd60, msg@entry=0x7f4866d8e5f0) at action.c:1549 #17 0x0000000000451c35 in run_top_route (a=0x7f4866c6a758, msg=0x7f4866d8e5f0, c=<optimized out>) at action.c:1635 #18 0x000000000055b4ae in receive_msg (buf=0x0, len=1725490672, rcv_info=0x7ffceb221de0) at receive.c:240 #19 0x000000000047abe0 in udp_rcv_loop () at udp_server.c:495 #20 0x000000000050360e in main_loop () at main.c:1600 #21 0x000000000041cdbc in main (argc=0, argv=0x0) at main.c:2616 (gdb) f 3 #3 0x00007f485b71d796 in dlg_onroute (req=0x7f4866d8e5f0, route_params=0x7fffff82, param=0x7ffceb21fd60) at dlg_handlers.c:1336 1336 dlg_handlers.c: No such file or directory. ``` relevant code: https://github.com/kamailio/kamailio/blob/4.4/modules/dialog/dlg_handlers.c… ``` /* run actions for the transition */ if (event==DLG_EVENT_REQBYE && new_state==DLG_STATE_DELETED && old_state!=DLG_STATE_DELETED) { LM_DBG("BYE successfully processed\n"); /* remove from timer */ ret = remove_dialog_timer(&dlg->tl); if (ret < 0) { LM_CRIT("unable to unlink the timer on dlg %p [%u:%u] " "with clid '%.*s' and tags '%.*s' '%.*s'\n", dlg, dlg->h_entry, dlg->h_id, dlg->callid.len, dlg->callid.s, dlg->tag[DLG_CALLER_LEG].len, dlg->tag[DLG_CALLER_LEG].s, dlg->tag[DLG_CALLEE_LEG].len, dlg->tag[DLG_CALLEE_LEG].s); } else if (ret > 0) { ``` ``` (gdb) p dlg $1 = (dlg_cell_t *) 0x7f47c4c7d560 (gdb) p *dlg $2 = {ref = -419086585, next = 0x7f47c4c7d598, prev = 0xa, h_id = 2, h_entry = 0, state = 3301430691, lifetime = 32583, init_ts = 3, start_ts = 0, end_ts = 1475139409, dflags = 32583, iflags = 1601467251, sflags = 1650552421, toroute = 2030069100, toroute_name = {s = 0x58 <error: Cannot access memory at address 0x58>, len = 0}, from_rr_nb = 0, tl = {next = 0x0, prev = 0x6eaf61, timeout = 7257938}, callid = {s = 0x6acfa0 "core", len = 94}, from_uri = {s = 0x7f47f0f0f0f0 "", len = -1005795570}, to_uri = { s = 0x7f47c4c7d628 "sst_refresh_method", len = 18}, req_uri = {s = 0x2 <error: Cannot access memory at address 0x2>, len = -993536453}, tag = {{ s = 0x6 <error: Cannot access memory at address 0x6>, len = -993536672}, {s = 0x726665725f747373 <error: Cannot access memory at address 0x726665725f747373>, len = 1600680805}}, cseq = {{s = 0x5449564e4900646f <error: Cannot access memory at address 0x5449564e4900646f>, len = 69}, { s = 0xc0 <error: Cannot access memory at address 0xc0>, len = 0}}, route_set = {{s = 0x0, len = 0}, {s = 0x6eaf61 "core: xavp.c", len = 7257938}}, contact = {{ s = 0x6acfa0 "core", len = 94}, {s = 0x7f47f0f0f0f0 "", len = 2060094989}}, bind_addr = {0x7f47c4c7d6c8, 0x12}, cbs = {first = 0x2, types = -993536293}, profile_links = 0x3, vars = 0x7f47c4c7d5f0} (gdb) p dlg->callid $3 = {s = 0x6acfa0 "core", len = 94} (gdb) p dlg->tag[0] $4 = {s = 0x6 <error: Cannot access memory at address 0x6>, len = -993536672} (gdb) p dlg->tag[1] $5 = {s = 0x726665725f747373 <error: Cannot access memory at address 0x726665725f747373>, len = 1600680805} ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/807

7 years, 10 months

[kamailio] consistency on name of main c file for a module (#82)

by Victor Seva

main file should be modulename.c or modulename_mod.c --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/82

7 years, 10 months

[kamailio] permissions: RPC AddressDump doesn't include mask size (#250)

by Olle E. Johansson

The new RPC command doesn't output the mask, only the IP. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/250

7 years, 11 months

Outbound flow failure handling merged to master

by Hugh Waite

Hello, As you will see I have merged my branch back into master. These changes add a new event route [tm:branch-failure] to the tm module which is run when any failure response is received on a transaction. The event_route uses a new route type BRANCH_ROUTE which limits the functions that can be run in the route. The functions t_check_status(), t_next_contact_flow(), t_relay() and unregister() can be used in this route. A new pv $T_reply_ruid is accessible in this route which can be used to unregister a single contact entry. The following example route can be used on a registrar to handle failed or invalid flows: event_route[tm:branch-failure] { xlog("L_INFO", "event_route[tm:branch-failure]\n"); if (t_check_status("430|403")) { if (!unregister("location", "$tu", "$T_reply_ruid")) { xlog("L_WARN", "failed to unregister $tu with ruid $T_reply_ruid\n"); } if (!t_next_contact_flow()) { xlog("L_INFO", "No more flows\n"); } else { xlog("L_INFO", "Next flow\n"); t_relay(); } } } Any bugs, memory leaks etc. let me know! Hugh -- Hugh Waite Principal Design Engineer Crocodile RCS Ltd.

8 years

[kamailio/kamailio] tls: minor openssl version upgrade error (#662)

by Victor Seva

``` Jun 6 14:38:43 spce lb[27903]: : tls [tls_init.c:557]: init_tls_h(): ERROR: tls: init_tls_h: installed openssl library version is too different from the library the Kamailio tls module was compiled with: installed "OpenSSL 1.0.1t 3 May 2016" (0x1000114f), compiled "OpenSSL 1.0.1k 8 Jan 2015" (0x100010bf).#012 Please make sure a compatible version is used (tls_force_run in kamailio.cfg will override this check) Jun 6 14:38:43 spce lb[27903]: CRITICAL: <core> [main.c:2577]: main(): could not initialize tls, exiting... ``` openssl was upgraded from 1.0.1k-3+deb8u5 to 1.0.1t-1+deb8u2 This seems not to work properly https://github.com/kamailio/kamailio/blob/master/modules/tls/tls_init.c#L54… ``` #if OPENSSL_VERSION_NUMBER < 0x00907000L WARN("You are using an old version of OpenSSL (< 0.9.7). Upgrade!\n"); #endif ssl_version=SSLeay(); /* check if version have the same major minor and fix level * (e.g. 0.9.8a & 0.9.8c are ok, but 0.9.8 and 0.9.9x are not) */ if ((ssl_version>>8)!=(OPENSSL_VERSION_NUMBER>>8)){ LOG(L_CRIT, "ERROR: tls: init_tls_h: installed openssl library " "version is too different from the library the Kamailio tls module " "was compiled with: installed \"%s\" (0x%08lx), compiled " "\"%s\" (0x%08lx).\n" " Please make sure a compatible version is used" " (tls_force_run in kamailio.cfg will override this check)\n", SSLeay_version(SSLEAY_VERSION), ssl_version, OPENSSL_VERSION_TEXT, (long)OPENSSL_VERSION_NUMBER); if (cfg_get(tls, tls_cfg, force_run)) LOG(L_WARN, "tls: init_tls_h: tls_force_run turned on, ignoring " " openssl version mismatch\n"); else return -1; /* safer to exit */ } ``` --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/662

8 years, 1 month

[kamailio/kamailio] Possible bug with track_cseq_updates set in dialog (#789)

by scfcplummy

Hi, When setting "track_cseq_updates" in dialog module, the ReINVITE that should be initiated with uac_auth() is never sent. Without "track_cseq_updates" set to 0, the reINVITE does take place. In the log I can see dialog doing the cseq update: Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_cseq.c:129]: dlg_cseq_update(): initiating cseq updates Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_hash.c:690]: dlg_lookup(): ref dlg 0x7fc2b265f4f0 with 1 -> 2 Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_hash.c:692]: dlg_lookup(): dialog id=4263 found on entry 1771 Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_var.c:250]: print_lists(): Internal var-list ((nil)): Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_var.c:260]: print_lists(): Dialog var-list (0x7fc2b265f2d8): Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_var.c:262]: print_lists(): cseq_diff=1 (flags 1) Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: DEBUG: dialog [dlg_cseq.c:176]: dlg_cseq_update(): adding auth cseq header value: 5136 but quickly followed by these errors: Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: ERROR: <core> [msg_translator.c:417]: clen_builder(): no message body found (missing crlf?) Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: ERROR: <core> [msg_translator.c:1963]: build_req_buf_from_sip_req(): Error while adjusting Content-Length Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: ERROR: tm [t_fwd.c:462]: prepare_new_uac(): could not build request Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: ERROR: tm [t_fwd.c:1723]: t_forward_nonack(): ERROR: t_forward_nonack: failure to add branches Sep 20 07:54:57 sbc /usr/local/sbin/kamailio[35746]: ERROR: tm [tm.c:1415]: _w_t_relay_to(): ERROR: w_t_relay_to: t_relay_to failed Kamailio was built from kamailio-4.4.3 source downloaded from here: https://www.kamailio.org/pub/kamailio/latest/src/ Version information: version: kamailio 4.4.3 (x86_64/linux) 5a2195 flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 5a2195 compiled on 08:46:12 Sep 16 2016 with gcc 5.4.0 Many thanks -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/789

8 years, 2 months

[kamailio/kamailio] uac_auth() function broken in 4.4.3 (#797)

by Sebastian Damm

We upgraded a system from 4.4.2 to 4.4.3 last week. After that, the uac_auth() function didn't do what it was supposed to do anymore. This is the failure route in the config file: ``` failure_route[TRUNKAUTH] { if (t_is_canceled()) { exit; } if ($T_reply_code == 401 or $T_reply_code == 407) { xlog("L_NOTICE", "[$pr:$si:$sp] [$cs $rm cid: $ci Status: $rs $rr F:$fU T:$tU R:$rU] Remote asked for authentication"); uac_auth(); t_relay(); exit; } } ``` In Kamailio 4.4.2 this works perfectly. In 4.4.3 when this code triggers, we get the following messages in our log: ``` Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: NOTICE: <script>: [udp:1.2.3.4:5060] [102 INVITE cid: asdasdalsjdalsdaskjdlak Status: <null> <null> F:11111111 T:00491234567890 R:01234567890] Remote asked for authentication Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: ERROR: <core> [msg_translator.c:417]: clen_builder(): no message body found (missing crlf?) Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: ERROR: <core> [msg_translator.c:1963]: build_req_buf_from_sip_req(): Error while adjusting Content-Length Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: ERROR: tm [t_fwd.c:462]: prepare_new_uac(): could not build request Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: ERROR: tm [t_fwd.c:1723]: t_forward_nonack(): ERROR: t_forward_nonack: failure to add branches Sep 23 12:25:41 eustatius /usr/sbin/kamailio[13249]: ERROR: tm [tm.c:1415]: _w_t_relay_to(): ERROR: w_t_relay_to: t_relay_to failed ``` After downgrading to 4.4.2, everything works again. -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/797

8 years, 2 months

[kamailio/kamailio] ims_isc: Add tel: associated URI on 3rd party REG (#804)

by Federico Favaro

Add also tel: as header in 3rd party REG towards TAS You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/804 -- Commit Summary -- * ims_isc: Add tel: associated URI on 3rd party REG -- File Changes -- M modules/ims_isc/mark.c (2) M modules/ims_isc/mod.c (2) M modules/ims_isc/third_party_reg.c (131) M modules/ims_isc/third_party_reg.h (2) -- Patch Links -- https://github.com/kamailio/kamailio/pull/804.patch https://github.com/kamailio/kamailio/pull/804.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/804

8 years, 2 months

[kamailio/kamailio] ims_auth: Put fresh keys from HSS on top of list (#803)

by Federico Favaro

If S-CSCF downloaded fresh keys from the HSS, put it on the top of the list, as they are already been sent to the UE via 401 message so it should be the first to be retrived to comparison once REGISTER with challenge comes from the UE You can view, comment on, or merge this pull request online at: https://github.com/kamailio/kamailio/pull/803 -- Commit Summary -- * ims_auth: Put fresh keys from HSS on top of list -- File Changes -- M modules/ims_auth/authorize.c (11) -- Patch Links -- https://github.com/kamailio/kamailio/pull/803.patch https://github.com/kamailio/kamailio/pull/803.diff -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/pull/803

8 years, 2 months

[kamailio/kamailio] pv: crash when retriving a pv value (#808)

by Victor Seva

``` Reading symbols from kamailio...Reading symbols from /usr/lib/debug/.build-id/10/824757bd1066806f2e19310929e17a9009a991.debug...done. done. [New LWP 5583] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1". Core was generated by `/usr/sbin/kamailio -f /etc/kamailio/proxy/kamailio.cfg -P /var/run/kamailio/kam'. Program terminated with signal SIGSEGV, Segmentation fault. #0 xavp_get_internal (name=0x7f486b2f7568, list=<optimized out>, idx=0, prv=0x0) at xavp.c:265 265 xavp.c: No such file or directory. (gdb) bt #0 xavp_get_internal (name=0x7f486b2f7568, list=<optimized out>, idx=0, prv=0x0) at xavp.c:265 #1 0x00007f486306b8b3 in pv_get_xavp (msg=0x7f4866d8e5f0, param=0x7f486b2f7768, res=0x7ffceb21ed90) at pv_xavp.c:134 #2 0x000000000058f96e in pv_get_spec_value (msg=0x7f4866d8e5f0, sp=0x7f486b2f7750, value=0x7ffceb21ed90) at pvapi.c:1307 #3 0x00007f479badb45d in lua_sr_pv_get (L=0x2b46aa0) at app_lua_sr.c:906 ... (gdb) f 3 #3 0x00007f479badb45d in lua_sr_pv_get (L=0x2b46aa0) at app_lua_sr.c:906 906 app_lua_sr.c: No such file or directory. (gdb) p pvn $5 = {s = 0x2c47588 "$xavp(caller_dom_prefs=>dummy)", len = 30} (gdb) f 2 #2 0x000000000058f96e in pv_get_spec_value (msg=0x7f4866d8e5f0, sp=0x7f486b2f7750, value=0x7ffceb21ed90) at pvapi.c:1307 1307 pvapi.c: No such file or directory. (gdb) p sp $6 = (pv_spec_p) 0x7f486b2f7750 (gdb) p *sp $7 = {type = PVT_XAVP, getf = 0x7f486306b810 <pv_get_xavp>, setf = 0x7f486306c640 <pv_set_xavp>, pvp = {pvn = {type = 1, nfree = 0x0, u = {isname = {type = 1798272592, name = {n = 0, s = { s = 0x0, len = 0}, re = 0x0}}, dname = 0x7f486b2f7650}}, pvi = {type = 0, u = { ival = 0, dval = 0x0}}}, trans = 0x0} (gdb) f 1 #1 0x00007f486306b8b3 in pv_get_xavp (msg=0x7f4866d8e5f0, param=0x7f486b2f7768, res=0x7ffceb21ed90) at pv_xavp.c:134 134 pv_xavp.c: No such file or directory. (gdb) p xname $8 = (pv_xavp_name_t *) 0x7f486b2f7650 (gdb) p *xname $9 = {name = {s = 0x7f486b2f77b6 "caller_dom_prefs=>dummy)", len = 16}, index = {type = PVT_NONE, getf = 0x0, setf = 0x0, pvp = {pvn = {type = 0, nfree = 0x0, u = {isname = {type = 0, name = { n = 0, s = {s = 0x0, len = 0}, re = 0x0}}, dname = 0x0}}, pvi = {type = 0, u = { ival = 0, dval = 0x0}}}, trans = 0x0}, next = 0x7f486b2f7568} (gdb) p *xname->next $10 = {name = {s = 0x7f486b2f77c8 "dummy)", len = 5}, index = {type = PVT_NONE, getf = 0x0, setf = 0x0, pvp = {pvn = {type = 0, nfree = 0x0, u = {isname = {type = 0, name = {n = 0, s = { s = 0x0, len = 0}, re = 0x0}}, dname = 0x0}}, pvi = {type = 0, u = {ival = 0, dval = 0x0}}}, trans = 0x0}, next = 0x0} (gdb) p avp $11 = <optimized out> (gdb) p avp->val value has been optimized out (gdb) p avp->val.v value has been optimized out (gdb) p avp->val.v.xavp value has been optimized out ``` Relevant code? ``` static sr_xavp_t *xavp_get_internal(str *name, sr_xavp_t **list, int idx, sr_xavp_t **prv) { sr_xavp_t *avp; unsigned int id; int n = 0; if(name==NULL || name->s==NULL) return NULL; id = get_hash1_raw(name->s, name->len); if(list && *list) avp = *list; else avp = *_xavp_list_crt; while(avp) { if(avp->id==id && avp->name.len==name->len && strncmp(avp->name.s, name->s, name->len)==0) { if(idx==n) return avp; n++; } if(prv) *prv = avp; avp = avp->next; } return NULL; } ``` -- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/808

8 years, 2 months

← Newer
1
2
3
4
5
6
7
...
32
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev September 2016