sr-dev April 2016

sr-dev@lists.kamailio.org

23 participants
432 discussions

[kamailio] feature request: sample config for federation / peering with repro (#531)
by Daniel Pocock 27 Sep '18

27 Sep '18

repro servers peer with each other in a federated manner just like SMTP servers for email, but using TLS mutual authentication to prevent impersonation. Kamailio has TLS support and should be able to talk to such servers and other Kamailio servers in the same way. It would be good to create a recommended sample configuration for this type of service and also add it to the RTC Quick Start Guide: http://rtcquickstart.org/guide/multi/sip-proxy.html --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/531

3 8

[kamailio] support usrloc handle_lost_tcp variable also in DB-Only scheme (#171)
by juha-h 04 Sep '18

04 Sep '18

--- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/171

2 3

[kamailio] add GnuTLS support (#371)
by zabbal 03 Sep '18

03 Sep '18

OpenSSL is well known for huge amount of deadly security vulnerabilities, even before heartbleed. It would be nice if I could avoid bringing in such a library just because of Kamailio - having support for GnuTLS will let the user to make such a choice. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/371

4 6

[kamailio] set_contact_alias is not applied (#445)
by Olle E. Johansson 20 Jun '18

20 Jun '18

If I run set_contact_alias nothing happens - the contact remains the same on the outbound message There's no error returned and debug logs indicate a proper header However, if I add "msg_apply_changes()" on the line after set_contact_alias the Contact sent to next hop has the alias content No other changes --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/445

3 19

[kamailio] error while dumping dialog via RPC (#145)
by Savolainen Dmitri 01 May '18

01 May '18

In part of profiles and/or variables section while using `static inline void internal_rpc_print_dlg(rpc_t *rpc, void *c, dlg_cell_t *dlg, int with_context) ` May be it is an error of ctl module ``` # kamcmd dlg.list { h_entry: 6718 h_id: 20440 call-id: 48c9fe85f6750163(a)192.168.5.60 from_uri: sip:000*051@xxxxxx.xx:5068 to_uri: sip:002@xxxxxx.xx:5068 state: 4 start_ts: 1430324850 init_ts: 1430324847 timeout: 1430368049 lifetime: 43200 dflags: 515 sflags: 0 iflags: 0 caller: { tag: bda5e24faa4c4ff5 contact: sip:000*051@192.168.5.60:5066;transport=udp;alias=xxx.xxx.78.202~5066~1 cseq: 5457 route_set: socket: udp:xxx.xxx.66.150:5068 } callee: { tag: 4y2gjr7N9231K contact: sip:002@xxx.xxx.66.151:5080;transport=udp cseq: 0 route_set: socket: udp:xxx.xxx.66.150:5068 } profiles: { ERROR while parsing the record 62, @698: 03 : bad record ``` --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/145

4 6

[kamailio] [Feature request] Python3 support for app_python (#544)
by Anthony Messina 01 Mar '18

01 Mar '18

Currently, app_python old works with Python2. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/544

3 3

[kamailio] dmq_usrloc replication and max_contacts (Kamailio v4.3.1) (#265)
by 00Asgaroth00 16 Feb '18

16 Feb '18

This is a snip from the user's mailing list, I'm just adding it to the issue tracker, as it is yet to be confirmed as a bug, only here for tracking pruporses: ``` I have a situation where I have 2 devices registering with the same AOR, I have the registrar module's max_contacts parameter set to 1 and I use the 0x04 flag on the save function. When I use dmq_usrloc for replication, I can see 2 contacts registered for the AOR on the "client" nodes whereas the node where the actual registration took place only has 1 contact for the AOR. ``` ``` It seems to me like another bug, although again I'm not familiar with the module so can't be sure without looking that it is not intended behaviour. I plan to look later this week when I have some time but in the meantime, you can send me the examples directly if you like. ``` --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/265

6 17

[kamailio] having keep-alive response count before ending the dialog (#438)
by jayesh1017 12 Feb '18

12 Feb '18

Kamailio takes care of sending in-dialog keep-alives using OPTIONS when dlg_set_attribute ka-src and ka-dst is used. It also sends OPTIONS to correct address if a client sends Re-Invite indicating a network change, which is a common case with mobile clients (switching between mobile-data and Wifi) fixed in #273 The problem is that it ends the dialog on missing even one keep-alive response. Missing a response is possible when the client is handling the network change and keep-alive is sent around that time. Thus, having a configurable counter after which you expect to end the dialog might be helpful. For eg. you decide to end the dialog after we miss 3 responses for keep-alives in a row. Something like dlg_set_attribute(ka-src, 3) where 3 indicates the number of responses that can be missed before ending the dialog. --- Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/438

4 11

git:master:b450a769: Updated P-CSCF example with additional Rx_AAR params
by Richard Good 08 Feb '18

08 Feb '18

Module: kamailio Branch: master Commit: b450a769cff3b5c8ea0962299f6b087da089cd59 URL: https://github.com/kamailio/kamailio/commit/b450a769cff3b5c8ea0962299f6b087… Author: Richard Good <richard.good(a)smilecoms.com> Committer: Richard Good <richard.good(a)smilecoms.com> Date: 2014-12-17T10:58:00+02:00 Updated P-CSCF example with additional Rx_AAR params --- Modified: examples/pcscf/kamailio.cfg --- Diff: https://github.com/kamailio/kamailio/commit/b450a769cff3b5c8ea0962299f6b087… Patch: https://github.com/kamailio/kamailio/commit/b450a769cff3b5c8ea0962299f6b087… --- diff --git a/examples/pcscf/kamailio.cfg b/examples/pcscf/kamailio.cfg index c09cdc9..c2d5f55 100644 --- a/examples/pcscf/kamailio.cfg +++ b/examples/pcscf/kamailio.cfg @@ -983,7 +983,7 @@ route[Orig_Initial] #!ifdef WITH_RX xlog("L_DBG","Diameter: Orig authorizing media via Rx\n"); - if(Rx_AAR("ORIG_SESSION_AAR","orig")==0){ + if(Rx_AAR("ORIG_SESSION_AAR","orig","",-1)==0){ exit; } } @@ -1035,7 +1035,7 @@ onreply_route[Orig_Initial_reply] #!ifdef WITH_RX if (t_check_status("180|183|200")){ xlog("L_DBG","Diameter: Orig authorizing media via Rx\n"); - if(Rx_AAR("ORIG_SESSION_AAR_REPLY","orig")==0){ + if(Rx_AAR("ORIG_SESSION_AAR_REPLY","orig","",-1)==0){ exit; } } @@ -1089,7 +1089,7 @@ route[Term_Initial] #!ifdef WITH_RX xlog("L_DBG","Diameter: Term authorizing media via Rx\n"); - if(Rx_AAR("TERM_SESSION_AAR","term")==0){ + if(Rx_AAR("TERM_SESSION_AAR","term","",-1)==0){ exit; } } @@ -1138,7 +1138,7 @@ onreply_route[Term_Initial_reply] #!ifdef WITH_RX if (t_check_status("180|183|200")){ xlog("L_DBG","Diameter: Orig authorizing media via Rx\n"); - if(Rx_AAR("TERM_SESSION_AAR_REPLY","term")==0){ + if(Rx_AAR("TERM_SESSION_AAR_REPLY","term","",-1)==0){ exit; } }

2 1

[kamailio/kamailio] Wishlist #234: URI transformation to pick up URI scheme (#592)
by Olle E. Johansson 16 Aug '17

16 Aug '17

I would like the URI transformations to be more generic so one can pick up the URI scheme, like HTTP: or TEL: Just an idea --- You are receiving this because you are subscribed to this thread. Reply to this email directly or view it on GitHub: https://github.com/kamailio/kamailio/issues/592

2 2

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev April 2016