sr-dev September 2014

sr-dev@lists.kamailio.org

33 participants
375 discussions

git:4.1: dialog: set again the dialog ids in context for BYE processing

by Daniel-Constantin Mierla

Module: sip-router Branch: 4.1 Commit: 6f9519b001a608af20787e0cfaf4a3a0d2dfc1fb URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=6f9519b… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Wed Sep 24 23:46:00 2014 +0200 dialog: set again the dialog ids in context for BYE processing - they can be reset by event route execution (cherry picked from commit 5b733fa361afced0418947c965b256dbe7ae3a68) --- modules/dialog/dlg_handlers.c | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diff --git a/modules/dialog/dlg_handlers.c b/modules/dialog/dlg_handlers.c index 45292b3..9ccdfe8 100644 --- a/modules/dialog/dlg_handlers.c +++ b/modules/dialog/dlg_handlers.c @@ -1280,6 +1280,7 @@ void dlg_onroute(struct sip_msg* req, str *route_params, void *param) _dlg_ctx.cpid = my_pid(); _dlg_ctx.expect_t = 1; + dlg_set_ctx_iuid(dlg); if_update_stat( dlg_enable_stats, active_dlgs, -1); goto done;

10 years, 3 months

git:4.1: dialog: check if the transaction is created for BYE closing the dialog

by Daniel-Constantin Mierla

Module: sip-router Branch: 4.1 Commit: 66161fa4e9d949063ffb5f0f3d6fd086b0ceece8 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=66161fa… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Sep 16 19:05:57 2014 +0200 dialog: check if the transaction is created for BYE closing the dialog - if not, release the dialog, because there will be no tm callbacks called later to release it. In this way avoid zombie dialog. - reported by Ovidiu Sas, FS#424 (cherry picked from commit 02e43f87b2fa3be61bc4c63a9f8359457e3e0484) ---

10 years, 3 months

git:master: enum: Minor updates to docs. Added section ID's

by Olle E. Johansson

Module: sip-router Branch: master Commit: c4c25a07c77ca5e2ceccd11cdab29ed93d86d29a URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=c4c25a0… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 22:09:15 2014 +0200 enum: Minor updates to docs. Added section ID's --- modules/enum/README | 6 +++--- modules/enum/doc/enum_admin.xml | 23 ++++++++++++----------- 2 files changed, 15 insertions(+), 14 deletions(-) diff --git a/modules/enum/README b/modules/enum/README index 5714184..2f10a2c 100644 --- a/modules/enum/README +++ b/modules/enum/README @@ -185,9 +185,9 @@ modparam("enum", "branchlabel", "i") 3.5. bl_algorithm (string) - This parameter determines which algorithm i_enum_query() will use to - select the position in the DNS tree where the infrastructure tree - branches off the user ENUM tree. + This parameter determines which algorithm the i_enum_query() function + will use to select the position in the DNS tree where the + infrastructure tree branches off the user ENUM tree. If set to "cc", i_enum_query() will always insert the label at the country-code level. Examples: i.1.e164.arpa, i.3.4.e164.arpa, diff --git a/modules/enum/doc/enum_admin.xml b/modules/enum/doc/enum_admin.xml index 4b80896..939c5fc 100644 --- a/modules/enum/doc/enum_admin.xml +++ b/modules/enum/doc/enum_admin.xml @@ -84,7 +84,7 @@ and -1 if not. </para> <para> - Enum module also implements is_from_user_enum function. + Enum module also implements <function>is_from_user_enum</function> function. This function does an enum lookup on the from user and returns true if found, false otherwise. </para> @@ -105,7 +105,7 @@ <section> <title>Parameters</title> - <section> + <section id="enum.p.domain_suffix"> <title><varname>domain_suffix</varname> (string)</title> <para> The domain suffix to be added to the domain name obtained from @@ -123,7 +123,7 @@ modparam("enum", "domain_suffix", "e1234.arpa.") </example> </section> - <section> + <section id="enum.p.tel_uri_params"> <title><varname>tel_uri_params</varname> (string)</title> <para> A string whose contents is appended to each new tel URI in the @@ -145,7 +145,7 @@ modparam("enum", "tel_uri_params", ";npdi") </programlisting> </example> </section> - <section> + <section id="enum.p.i_enum_suffix"> <title><varname>i_enum_suffix</varname> (string)</title> <para> The domain suffix to be used for i_enum_query() lookups. @@ -161,7 +161,7 @@ modparam("enum", "i_enum_suffix", "e1234.arpa.") </programlisting> </example> </section> - <section> + <section id="enum.p.branchlabel"> <title><varname>branchlabel</varname> (string)</title> <para> This parameter determines which label i_enum_query() will use @@ -177,10 +177,11 @@ modparam("enum", "branchlabel", "i") </programlisting> </example> </section> - <section> + <section id="enum.p.bl_algorithm"> <title><varname>bl_algorithm</varname> (string)</title> <para> - This parameter determines which algorithm i_enum_query() will use + This parameter determines which algorithm the + <function>i_enum_query()</function> function will use to select the position in the DNS tree where the infrastructure tree branches off the user ENUM tree. </para> @@ -234,7 +235,7 @@ modparam("enum", "bl_algorithm", "txt") <section> <title>Functions</title> - <section> + <section id="enum.f.enum_query"> <title> <function moreinfo="none">enum_query(["suffix"[,"service"]])</function> </title> @@ -288,7 +289,7 @@ enum_query("e164.arpa.","+sip+voice:sip"); </example> </section> - <section> + <section id="enum.f.enum_pv_query"> <title> <function moreinfo="none">enum_pv_query("pvar"[,"suffix"[,"service"]])</function> </title> @@ -347,7 +348,7 @@ enum_pv_query("$avp(i:100)","e164.arpa.","+sip+voice:sip"); </example> </section> - <section> + <section id="enum.f.i_enum_query"> <title> <function moreinfo="none">i_enum_query(["suffix"[,"service"]])</function> </title> @@ -363,7 +364,7 @@ enum_pv_query("$avp(i:100)","e164.arpa.","+sip+voice:sip"); </para> </section> - <section> + <section id="enum.f.is_from_user_enum"> <title><function moreinfo="none">is_from_user_enum()</function></title> <para> Checks if the user part of from <abbrev>URI</abbrev>

10 years, 3 months

git:master: app_java: minor doc updates

by Olle E. Johansson

Module: sip-router Branch: master Commit: 820998136ffda07b607bc9833c340b6b62e24219 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=8209981… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 22:00:45 2014 +0200 app_java: minor doc updates - Added section ID's --- modules/app_java/README | 26 +++++++++++++------------- modules/app_java/doc/app_java_admin.xml | 25 +++++++++++++------------ 2 files changed, 26 insertions(+), 25 deletions(-) diff --git a/modules/app_java/README b/modules/app_java/README index d7fd0fc..f2aff39 100644 --- a/modules/app_java/README +++ b/modules/app_java/README @@ -6,7 +6,7 @@ Edited by Konstantin Mosesov - Copyright © 2013, 2014 Konstantin Mosesov + Copyright � 2013, 2014 Konstantin Mosesov __________________________________________________________________ Table of Contents @@ -114,9 +114,9 @@ Chapter 1. Admin Guide 1. Overview - This module allows executing Java compiled classes from config file, - exporting functions to access the SIP message from Java using Java - Native Interface (JNI). + This module allows execution of Java compiled classes from the Kamailio + config file, exporting functions to access the SIP message from Java + using the Java Native Interface (JNI). 2. Dependencies @@ -174,7 +174,7 @@ Chapter 1. Admin Guide The class name should have the same compiled file name. If the value is "Kamailio", then the compiled file should be named as "Kamailio.class". - Default value is “Kamailio”. + Default value is "Kamailio". Example 1.1. Set class_name parameter ... @@ -185,7 +185,7 @@ modparam("app_java", "class_name", "Kamailio") TBD. - Default value is “child_init”. + Default value is "child_init". Example 1.2. Set child_init_method parameter ... @@ -196,7 +196,7 @@ modparam("app_java", "child_init_method", "my_mod_init") Java options for Java Virtual Machine. For more info read java docs - Default value is “-Djava.compiler=NONE”. + Default value is "-Djava.compiler=NONE". Example 1.3. Set java_options parameter ... @@ -230,10 +230,10 @@ modparam("app_java", "java_options", "-Xdebug -verbose:gc,class,jni 4.4. force_cmd_exec (int) This parameter forces execution a kamailio comnmand with java native - method “KamExec”. # Note: this is an untested yet feature, may cause + method "KamExec". # Note: this is an untested yet feature, may cause (but may not) a memory leaks if used from embedded languages. - Default value is “0 (off)”. + Default value is "0 (off)". Example 1.7. Set force_cmd_exec parameter ... @@ -255,9 +255,9 @@ modparam("app_java", "force_cmd_exec", 1) 5.5. java_s_staticmethod_exec(method, method_signature, [param1[, param2[, ...]]]) -5.1. Common requirements +5.1. Common requirements - Each function has a required parameter “method_signature”. For more + Each function has a required parameter "method_signature". For more info see Determine the signature of a method. Signature represents the variable type. The mapping between the Java type and C type is Type Chararacter @@ -362,7 +362,7 @@ public int ExampleMethod(boolean flagSet, byte bFlag); 5.3. java_staticmethod_exec(method, method_signature, [param1[, param2[, ...]]]) - Executes a java static method method. Parameter method_signature is + Executes a Java static method method. Parameter method_signature is required. * Example 1.11. Signature: "V" Kamailio prototype @@ -421,7 +421,7 @@ public static int ExampleMethod(boolean flagSet, byte bFlag); 5.4. java_s_method_exec(method, method_signature, [param1[, param2[, ...]]]) - Executes a java class synchronized method method. Parameter + Executes a Java class synchronized method method. Parameter method_signature is required. For more info see Synchronized Methods diff --git a/modules/app_java/doc/app_java_admin.xml b/modules/app_java/doc/app_java_admin.xml index 43f9fa1..a9e8f1a 100644 --- a/modules/app_java/doc/app_java_admin.xml +++ b/modules/app_java/doc/app_java_admin.xml @@ -19,8 +19,9 @@ <section> <title>Overview</title> <para> - This module allows executing Java compiled classes from config file, exporting - functions to access the SIP message from Java using Java Native Interface (JNI). + This module allows execution of Java compiled classes from the &kamailio; + config file, exporting functions to access the SIP message from Java + using the Java Native Interface (JNI). </para> </section>  @@ -99,7 +100,7 @@ <title>Parameters</title>  - <section> + <section id="app_java.p.class_name"> <title><varname>class_name</varname> (string)</title> <para> The class name should have the same compiled file name. @@ -121,7 +122,7 @@ modparam("app_java", "class_name", "&kamailio;") </section>  - <section> + <section id="app_java.p.child_init_method"> <title><varname>child_init_method</varname> (string)</title> <para> TBD. @@ -142,7 +143,7 @@ modparam("app_java", "child_init_method", "my_mod_init") </section>  - <section> + <section id="app_java.p.java_option"> <title><varname>java_options</varname> (string)</title> <para> Java options for Java Virtual Machine. @@ -197,7 +198,7 @@ modparam("app_java", "java_options", "-Xdebug -verbose:gc,class,jni </section>  - <section> + <section id="app_java.p.force_cmd_exec"> <title><varname>force_cmd_exec</varname> (int)</title> <para> This parameter forces execution a &kamailiobinary; comnmand with java native method <quote>KamExec</quote>. @@ -282,7 +283,7 @@ modparam("app_java", "force_cmd_exec", 1)   - <section> + <section id="app_java.f.java_method_exec"> <title>java_method_exec(method, method_signature, [param1[, param2[, ...]]])</title> <para>Executes a java class method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> <itemizedlist> @@ -363,9 +364,9 @@ public int ExampleMethod(boolean flagSet, byte bFlag);   - <section> + <section id="app_java.f.java_staticmethod_exec"> <title>java_staticmethod_exec(method, method_signature, [param1[, param2[, ...]]])</title> - <para>Executes a java static method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> + <para>Executes a Java static method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> <itemizedlist> <listitem> <example> @@ -444,9 +445,9 @@ public static int ExampleMethod(boolean flagSet, byte bFlag);   - <section> + <section id="app_java.f.java_s_method_exec"> <title>java_s_method_exec(method, method_signature, [param1[, param2[, ...]]])</title> - <para>Executes a java class synchronized method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> + <para>Executes a Java class synchronized method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> <para>For more info see <ulink url="http://docs.oracle.com/javase/tutorial/essential/concurrency/syncmeth.html"><citetitle>Synchronized Methods</citetitle></ulink></para> <itemizedlist> <listitem> @@ -526,7 +527,7 @@ public synchronized int ExampleMethod(boolean flagSet, byte bFlag);   - <section> + <section id="app_java.f.java_s_staticmethod_exec"> <title>java_s_staticmethod_exec(method, method_signature, [param1[, param2[, ...]]])</title> <para>Executes a java synchronized static method <emphasis>method</emphasis>. Parameter <emphasis>method_signature</emphasis> is required.</para> <para>For more info see <ulink url="http://docs.oracle.com/javase/tutorial/essential/concurrency/syncmeth.html"><citetitle>Synchronized Methods</citetitle></ulink></para>

10 years, 3 months

git:master: Pike: Documentation updates

by Olle E. Johansson

Module: sip-router Branch: master Commit: 77462923e9c6f34c96f1d50440334964f0277efc URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=7746292… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 21:31:55 2014 +0200 Pike: Documentation updates --- modules/pike/README | 42 +++++++++++++++++++------------------- modules/pike/doc/pike_admin.xml | 28 +++++++++++++------------- 2 files changed, 35 insertions(+), 35 deletions(-) diff --git a/modules/pike/README b/modules/pike/README index 732db73..bb7466b 100644 --- a/modules/pike/README +++ b/modules/pike/README @@ -78,12 +78,12 @@ Chapter 1. Admin Guide 1. Overview - The module keeps trace of all (or selected ones) incoming request's IP - source and blocks the ones that exceeded some limit. Works simultaneous - for IPv4 and IPv6 addresses. + The pike module keeps trace of all (or selected ones) incoming + request's IP source and blocks the ones that exceed the limit. It works + simultaneously for IPv4 and IPv6 addresses. The module does not implement any actions on blocking - it just simply - reports that there is a high traffic from an IP; what to do, is the + reports that there is high traffic from an IP; what to do, is the administator decision (via scripting). 2. Dependencies @@ -114,13 +114,13 @@ Chapter 1. Admin Guide Time period in seconds used for sampling (or the sampling accuracy). The smaller the better, but slower. If you want to detect peeks, use a small one. To limit the access (like total number of requests on a long - period of time) to a proxy resource (a gateway for ex), use a bigger - value of this parameter. + period of time) to a proxy resource (a gateway for example), use a + bigger value of this parameter. - IMPORTANT: a too small value may lead to performance penalties due + IMPORTANT: a too small value may lead to performance penalties due to timer process overloading. - Default value is 2. + Default value is "2". Example 1.1. Set sampling_time_unit parameter ... @@ -132,7 +132,7 @@ modparam("pike", "sampling_time_unit", 10) How many requests should be allowed per sampling_time_unit before blocking all the incoming request from that IP. Practically, the blocking limit is between ( let's have x=reqs_density_per_unit) x and - 3*x for IPv4 addresses and between x and 8*x for ipv6 addresses. + 3*x for IPv4 addresses and between x and 8*x for IPv6 addresses. Default value is 30. @@ -143,13 +143,13 @@ modparam("pike", "reqs_density_per_unit", 30) 3.3. remove_latency (integer) - For how long the IP address will be kept in memory after the last - request from that IP address. It's a sort of timeout value, in seconds. - Note that it is not the duration to keep the IP in state 'blocked'. An - IP is unblocked next occurence of 'sampling_time_unit' that does not - exceed 'reqs_density_per_unit'. Keeping an IP in memory results in - faster reaching of blocked state -- see the notes about the limits of - getting to state 'blocked'. + Speciies for how long the IP address will be kept in memory after the + last request from that IP address. It's a sort of timeout value, in + seconds. Note that it is not the duration to keep the IP in state + 'blocked'. An IP is unblocked next occurence of 'sampling_time_unit' + that does not exceed 'reqs_density_per_unit'. Keeping an IP in memory + results in faster reaching of blocked state -- see the notes about the + limits of getting to state 'blocked'. Default value is 120. @@ -160,8 +160,8 @@ modparam("pike", "remove_latency", 130) 3.4. pike_log_level (integer) - Log level to be used by module to auto report the blocking (only first - time) and unblocking of IPs detected as source of floods. + Syslog log level to be used by module to auto report the blocking (only + first time) and unblocking of IPs detected as source of floods. Default value is 1 (L_WARN). @@ -176,8 +176,8 @@ modparam("pike", "pike_log_level", -1) 4.1. pike_check_req() - Process the source IP of the current request and returns false if the - IP was exceeding the blocking limit. + Process the source IP of the current request and return false if the IP + was exceeding the blocking limit. Return codes: * 1 (true) - IP is not to be blocked or internal error occured. @@ -185,7 +185,7 @@ modparam("pike", "pike_log_level", -1) Warning IMPORTANT: in case of internal error, the function returns true to avoid reporting the current processed IP as blocked. - * -1 (false) - IP is source of flooding, being previously detected + * -1 (false) - IP is source of flooding, previously detected * -2 (false) - IP is detected as a new source of flooding - first time detection diff --git a/modules/pike/doc/pike_admin.xml b/modules/pike/doc/pike_admin.xml index 9ccc91c..bd4b846 100644 --- a/modules/pike/doc/pike_admin.xml +++ b/modules/pike/doc/pike_admin.xml @@ -16,13 +16,13 @@ <section> <title>Overview</title> <para> - The module keeps trace of all (or selected ones) incoming request's IP - source and blocks the ones that exceeded some limit. - Works simultaneous for IPv4 and IPv6 addresses. + The pike module keeps trace of all (or selected ones) incoming request's IP + source and blocks the ones that exceed the limit. + It works simultaneously for IPv4 and IPv6 addresses. </para> <para> The module does not implement any actions on blocking - it just simply - reports that there is a high traffic from an IP; what to do, is + reports that there is high traffic from an IP; what to do, is the administator decision (via scripting). </para> </section> @@ -64,16 +64,16 @@ Time period in seconds used for sampling (or the sampling accuracy). The smaller the better, but slower. If you want to detect peeks, use a small one. To limit the access (like total number of requests on a - long period of time) to a proxy resource (a gateway for ex), use + long period of time) to a proxy resource (a gateway for example), use a bigger value of this parameter. </para> <para> IMPORTANT: a too small value may lead to performance penalties due - timer process overloading. + to timer process overloading. </para> <para> <emphasis> - Default value is 2. + Default value is <quote>2</quote>. </emphasis> </para> <example> @@ -88,10 +88,10 @@ modparam("pike", "sampling_time_unit", 10) <section id="pike.p.reqs_density_per_unit"> <title><varname>reqs_density_per_unit</varname> (integer)</title> <para> - How many requests should be allowed per sampling_time_unit before - blocking all the incoming request from that IP. Practically, the + How many requests should be allowed per <varname>sampling_time_unit</varname> + before blocking all the incoming request from that IP. Practically, the blocking limit is between ( let's have x=reqs_density_per_unit) x - and 3*x for IPv4 addresses and between x and 8*x for ipv6 addresses. + and 3*x for IPv4 addresses and between x and 8*x for IPv6 addresses. </para> <para> <emphasis> @@ -110,7 +110,7 @@ modparam("pike", "reqs_density_per_unit", 30) <section id="pike.p.remove_latency"> <title><varname>remove_latency</varname> (integer)</title> <para> - For how long the IP address will be kept in memory after the last + Speciies for how long the IP address will be kept in memory after the last request from that IP address. It's a sort of timeout value, in seconds. Note that it is not the duration to keep the IP in state 'blocked'. An IP is unblocked next occurence of 'sampling_time_unit' that does not @@ -135,7 +135,7 @@ modparam("pike", "remove_latency", 130) <section id="pike.p.pike_log_level"> <title><varname>pike_log_level</varname> (integer)</title> <para> - Log level to be used by module to auto report the blocking (only first + Syslog log level to be used by module to auto report the blocking (only first time) and unblocking of IPs detected as source of floods. </para> <para> @@ -162,7 +162,7 @@ modparam("pike", "pike_log_level", -1) <function moreinfo="none">pike_check_req()</function> </title> <para> - Process the source IP of the current request and returns false if + Process the source IP of the current request and return false if the IP was exceeding the blocking limit. </para> <para> @@ -181,7 +181,7 @@ modparam("pike", "pike_log_level", -1) <listitem> <para> <emphasis>-1 (false)</emphasis> - IP is source of - flooding, being previously detected + flooding, previously detected </para> </listitem> <listitem>

10 years, 3 months

git:master: xlog: Minor documentation updates

by Olle E. Johansson

Module: sip-router Branch: master Commit: 6b96fa92093ec41ae343da1537afd82666c9be5c URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=6b96fa9… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 21:45:23 2014 +0200 xlog: Minor documentation updates Added section ID's --- modules/xlog/README | 8 ++++---- modules/xlog/doc/xlog_admin.xml | 28 ++++++++++++++-------------- 2 files changed, 18 insertions(+), 18 deletions(-) diff --git a/modules/xlog/README b/modules/xlog/README index 416473d..c770cf6 100644 --- a/modules/xlog/README +++ b/modules/xlog/README @@ -269,10 +269,10 @@ xdbg("time $Cbx[$Tf]$Cxx method ($rm) r-uri ($ru)\n"); 5.3. xlogl([ [facility,] level,] format) - Similar to xlog(), in addition is printing cfg line number at the - beginning of message. + Similar to xlog(), in addition prints configuration file line number at + the beginning of message. 5.4. xdbgl(format) - Similar to xdbg(), in addition is printing cfg line number at the - beginning of message. + Similar to xdbg(), in addition prints configuration file line number at + the beginning of message. diff --git a/modules/xlog/doc/xlog_admin.xml b/modules/xlog/doc/xlog_admin.xml index 24d26a9..dad27a6 100644 --- a/modules/xlog/doc/xlog_admin.xml +++ b/modules/xlog/doc/xlog_admin.xml @@ -28,8 +28,8 @@ <title>Implemented Specifiers</title> <para> In the xlog function, you use pseudo-variables, that are a part - of &kamailio; core and are used by other modules as well (e.g., avpops - in the function avp_printf()) + of &kamailio; core and are used by other modules as well (e.g., <emphasis>avpops</emphasis> + in the function <function>avp_printf()</function>) </para> <para> The most important changes from earlier versions of &kamailio; are: @@ -93,7 +93,7 @@ </section> <section> <title>Parameters</title> - <section> + <section id="xlog.p.buf_size"> <title><varname>buf_size</varname> (integer)</title> <para> Maximum size of the log message. @@ -112,7 +112,7 @@ modparam("xlog", "buf_size", 8192) </programlisting> </example> </section> - <section> + <section id="xlog.p.force_color"> <title><varname>force_color</varname> (integer)</title> <para> When set to 1, forces color printing even if log_stderror=0. @@ -131,7 +131,7 @@ modparam("xlog", "force_color", 0) </programlisting> </example> </section> - <section> + <section id="xlog.p.long_format"> <title><varname>long_format</varname> (integer)</title> <para> When set to 1, prints config file name in xlogl() and xdbgl() @@ -151,7 +151,7 @@ modparam("xlog", "long_format", 1) </programlisting> </example> </section> - <section> + <section id="xlog.p.varname"> <title><varname>prefix</varname> (str)</title> <para> Prefix to be printed before the log message. @@ -170,7 +170,7 @@ modparam("xlog", "prefix", "-xlog: ") </programlisting> </example> </section> - <section> + <section id="xlog.p.log_facility"> <title><varname>log_facility</varname> (string)</title> <para> Syslog facility to be used when printing xlog messages. @@ -188,7 +188,7 @@ modparam("xlog", "log_facility", "LOG_DAEMON") </programlisting> </example> </section> - <section> + <section id="xlog.p.log_colors"> <title><varname>log_colors</varname> (string)</title> <para> Update terminal colors used by core for log levels (when log_stderr=1 @@ -215,7 +215,7 @@ modparam("xlog", "log_colors", "L_ERR=cr;L_WARN=px") </section> <section> <title>Functions</title> - <section> + <section id="xlog.f.xlog"> <title> <function moreinfo="none">xlog([ [facility,] level,] format)</function> </title> @@ -318,7 +318,7 @@ xlog("LOG_LOCAL3", "L_ERR", "this message will be sent to syslog facility LOG_LO </example> </section> - <section> + <section id="xlog.f.xdbg"> <title> <function moreinfo="none">xdbg(format)</function> </title> @@ -345,21 +345,21 @@ xdbg("time $Cbx[$Tf]$Cxx method ($rm) r-uri ($ru)\n"); </programlisting> </example> </section> - <section> + <section id="xlog.f.xlogl"> <title> <function moreinfo="none">xlogl([ [facility,] level,] format)</function> </title> <para> - Similar to xlog(), in addition is printing cfg line number + Similar to xlog(), in addition prints configuration file line number at the beginning of message. </para> </section> - <section> + <section id="xlog.f.xdbgl"> <title> <function moreinfo="none">xdbgl(format)</function> </title> <para> - Similar to xdbg(), in addition is printing cfg line number + Similar to xdbg(), in addition prints configuration file line number at the beginning of message. </para> </section>

10 years, 3 months

git:master: tls: documentation updates

by Olle E. Johansson

Module: sip-router Branch: master Commit: 5ace8b081bb4bec2e94b48252311b63339794e24 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=5ace8b0… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 21:31:25 2014 +0200 tls: documentation updates --- modules/tls/README | 83 +++++++++++++++++++------------------ modules/tls/doc/tls.xml | 105 +++++++++++++++++++++++++++++++++++++--------- 2 files changed, 126 insertions(+), 62 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=5ac…

10 years, 3 months

git:master: statistics: minor update of docs

by Olle E. Johansson

Module: sip-router Branch: master Commit: fa6154cc346b77934ad57d0c96b8e8c7c1913dbc URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=fa6154c… Author: Olle E. Johansson <oej(a)edvina.net> Committer: Olle E. Johansson <oej(a)edvina.net> Date: Thu Sep 25 20:46:03 2014 +0200 statistics: minor update of docs --- modules/statistics/README | 5 +++-- modules/statistics/doc/statistics_admin.xml | 16 ++++++++-------- 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/modules/statistics/README b/modules/statistics/README index 04b1bbd..03798f0 100644 --- a/modules/statistics/README +++ b/modules/statistics/README @@ -107,7 +107,8 @@ modparam("statistics", "variable", "active_calls/no_reset") Meaning of the parameters is as follows: * variable - variable to be updated (it can be a string or a pseudovariable); - * value - value to update with; it may be also negative. + * value - value to update with; it may be also negative (it can be a + string or pseudovariable). This function can be used from ANY_ROUTE. @@ -124,7 +125,7 @@ update_stat("$var(a_calls)", "-1"); Resets to zero the value of the statistic variable. Meaning of the parameters is as follows: - * variable - variable to be reset-ed (it can be a string or a + * variable - variable to be reset (it can be a string or a pseudovariable). This function can be used from REQUEST_ROUTE, BRANCH_ROUTE, diff --git a/modules/statistics/doc/statistics_admin.xml b/modules/statistics/doc/statistics_admin.xml index 1e4dab5..4997d7b 100644 --- a/modules/statistics/doc/statistics_admin.xml +++ b/modules/statistics/doc/statistics_admin.xml @@ -9,7 +9,7 @@ <chapter> <title>&adminguide;</title> - <section> + <section id="statistics.overview"> <title>Overview</title> <para>The <acronym>Statistics</acronym> module is a wrapper over the @@ -21,7 +21,7 @@ implementation of any kind of statistic scenario.</para> </section> - <section> + <section id="statistics.dependencies"> <title>Dependencies</title> <section> @@ -48,10 +48,10 @@ </section> </section> - <section> + <section id="statistics.parameters"> <title>Parameters</title> - <section> + <section id="statistics.p.variable"> <title><varname>variable</varname> (string)</title> <para>Name of a new statistic variable. The name may be followed by @@ -75,10 +75,10 @@ modparam("statistics", "variable", "active_calls/no_reset") </section> </section> - <section> + <section id="statistics.functions"> <title>Functions</title> - <section> + <section id="statistics.f.update_stat"> <title><function moreinfo="none">update_stat(variable,value)</function></title> @@ -115,7 +115,7 @@ update_stat("$var(a_calls)", "-1"); </example> </section> - <section> + <section id="statistics.f.reset_stat"> <title><function moreinfo="none">reset_stat(variable)</function></title> <para>Resets to zero the value of the statistic variable.</para> @@ -124,7 +124,7 @@ update_stat("$var(a_calls)", "-1"); <itemizedlist> <listitem> - <para><emphasis>variable</emphasis> - variable to be reset-ed (it + <para><emphasis>variable</emphasis> - variable to be reset (it can be a string or a pseudovariable).</para> </listitem> </itemizedlist>

10 years, 3 months

[tracker] Task changed: mtree README is missing parameters

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has been changed. The changes are listed below. For full information about what has changed, visit the URL and click the History tab. FS#470 - mtree README is missing parameters User who did this: Juha Heinanen (jh) Category: Core -> Module Task Type: Bug Report -> Improvement More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=470 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

10 years, 3 months

[tracker] Task opened: mtree README is missing parameters

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Juha Heinanen (jh) Attached to Project - sip-router Summary - mtree README is missing parameters Task Type - Bug Report Category - Core Status - New Assigned To - Operating System - All Severity - Low Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - mtree README is missing description of parameters pv_dstid, pv_weight, and pv_count. the last does not appear to have any code associated with it. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=470 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

10 years, 3 months

← Newer
1
2
3
4
5
6
7
8
9
...
38
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev September 2014