sr-dev July 2014

sr-dev@lists.kamailio.org

25 participants
140 discussions

[tracker] Comment added: "unsupported route type: 64" after calling event route dialog:end

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#456 - "unsupported route type: 64" after calling event route dialog:end User who did this - Daniel-Constantin Mierla (miconda) ---------- Actually I discovered it was not backported. I just did it now. The commit on master was 4fab97fb54334a55b1fce4e0d2f417fda5727c3a ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=456#comment1568 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

9 years, 8 months

git:4.1: dialog: backup and restore exiting route type when executing dialog event_route blocks

by Daniel-Constantin Mierla

Module: sip-router Branch: 4.1 Commit: 4eb7b5b0d4b2d914f488d15d637e4448102d6d63 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=4eb7b5b… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri Jun 13 12:00:21 2014 +0200 dialog: backup and restore exiting route type when executing dialog event_route blocks - reported by Nuno Miguel Reis (cherry picked from commit 4fab97fb54334a55b1fce4e0d2f417fda5727c3a) --- modules/dialog/dlg_handlers.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/modules/dialog/dlg_handlers.c b/modules/dialog/dlg_handlers.c index 21c4391..778f97b 100644 --- a/modules/dialog/dlg_handlers.c +++ b/modules/dialog/dlg_handlers.c @@ -1454,6 +1454,7 @@ void dlg_run_event_route(dlg_cell_t *dlg, sip_msg_t *msg, int ostate, int nstate { sip_msg_t *fmsg; int rt; + int bkroute; if(dlg==NULL) return; @@ -1483,11 +1484,13 @@ void dlg_run_event_route(dlg_cell_t *dlg, sip_msg_t *msg, int ostate, int nstate dlg_ref(dlg, 1); dlg_set_ctx_iuid(dlg); LM_DBG("executing event_route %d on state %d\n", rt, nstate); + bkroute = get_route_type(); set_route_type(LOCAL_ROUTE); run_top_route(event_rt.rlist[rt], fmsg, 0); dlg_reset_ctx_iuid(); exec_post_script_cb(fmsg, LOCAL_CB_TYPE); dlg_unref(dlg, 1); + set_route_type(bkroute); } }

9 years, 8 months

[tracker] Comment added: "unsupported route type: 64" after calling event route dialog:end

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#456 - "unsupported route type: 64" after calling event route dialog:end User who did this - Andrew Pogrebennyk (marduk) ---------- I see, thanks. Was it fixed by commit fbe7347 - dialog: execute internal event_route blocks under local_route type (7 weeks ago) <Daniel-Constantin Mierla> and only this commit? ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=456#comment1567 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

9 years, 8 months

[tracker] Comment added: "unsupported route type: 64" after calling event route dialog:end

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#456 - "unsupported route type: 64" after calling event route dialog:end User who did this - Daniel-Constantin Mierla (miconda) ---------- This should be fixed in branch 4.1, to be part of 4.1.5 next week. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=456#comment1566 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

9 years, 8 months

[tracker] Task opened: "unsupported route type: 64" after calling event route dialog:end

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Andrew Pogrebennyk (marduk) Attached to Project - sip-router Summary - "unsupported route type: 64" after calling event route dialog:end Task Type - Bug Report Category - Core Status - Unconfirmed Assigned To - Operating System - All Severity - Low Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - We are using event route dialog:end to execute some lua scripts: event_route[dialog:end] { if (!lua_run("del_dlg_profile", "$ci")) { xlog("L_ERROR", "Failed to decrease redis counters - R=$ru ID=$ci\n"); } else { xlog("L_INFO", "removed redis counters - R=$ru ID=$ci\n"); } } The problem is that when we have a BYE message, which triggers the event route above and is then processed by the loose_route() and finally goes to t_relay(), Jul 31 15:56:44 prx01a proxy[12447]: NOTICE: <script>: New request - M=BYE R=sip:172.30.52.132:5080;prxroute=1 F=sip:sipwise-test2@172.30.52.103 T=sip:43991001@172.30.52.103 IP=172.17.135.86:41748 (172.30.52.135:5060) ID=0ik1N5ahpzAzCaIQmtMeqkeA1yoK1l4j Jul 31 15:56:44 prx01a proxy[12447]: INFO: <script>: removed redis counters - R=sip:172.30.52.132:5080;prxroute=1 ID=0ik1N5ahpzAzCaIQmtMeqkeA1yoK1l4j Jul 31 15:56:44 prx01a proxy[12447]: INFO: <script>: Stop mediaproxy for all branches - R=sip:172.30.52.132:5080;prxroute=1 ID=0ik1N5ahpzAzCaIQmtMeqkeA1yoK1l4j Jul 31 15:56:44 prx01a proxy[12447]: INFO: <script>: Relaying request, du='<null>' - R=sip:172.30.52.132:5080;prxroute=1 ID=0ik1N5ahpzAzCaIQmtMeqkeA1yoK1l4j the t_relay fails with "unsupported route type: 64": Jul 31 15:56:44 prx01a proxy[12447]: : tm [tm.c:1518]: _w_t_relay_to(): ERROR: w_t_relay_to: unsupported route type: 64 it looks like event route dialog:end does not clear breaks internal state of the kamailio process. When UAC retransmits the BYE there is no event route called and there is no problem. root@prx01a:~# kamailio -V version: kamailio 4.1.4 (x86_64/linux) flags: STATS: Off, USE_TCP, USE_TLS, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, DBG_QM_MALLOC, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS=1024, MAX_RECV_BUFFER_SIZE 262144, MAX_LISTEN 16, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 4MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled on 20:52:15 Jul 24 2014 with gcc 4.7.2 More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=456 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

9 years, 8 months

Re: [sr-dev] [SR-Users] Obscuring SIP traffic and using with NoSIP

by Muhammad Shahzad

The key purpose of ITV encryption is to avoid making a pattern of any sort. If you encrypt same text / packet 10 times you will get completely different encrypted text / packet each time. This happens due to the fact that the encryption key changes dynamically with each new encryption done, see the readme file for more details https://github.com/mshary/itv/blob/master/README.md Secondly with v2.0, it uses non-deterministic random source as well as auto-learning, so it can adopt to new symbols and words encountered while encrypting and update itself to use them. So technically, it can also be used for binary data such as RTP, however RTP uses UDP which has possibility of packet loss and thus not suitable for ITV encryption (at least for now, this is a hot discussion within my researchers circle and we are actively looking for a solution for this). See release notes for v2.0 here, https://github.com/mshary/itv/releases/tag/v2.0 Anyways, the current target is to use kamailio as SIP proxy and doubango as SIP client for iPhone and Android. Once it is achieved it will be available free / open source to public and then it can be actually tested against all possible voip blocking and sniffing scenarios which we hope it would be able to solve with minimal possible overhead. So far the prototype works pretty good in a few voip blocked countries and GSM operators where we have tested it. Thank you. On Wed, Jul 30, 2014 at 5:32 PM, Daniel Tryba <daniel(a)pocos.nl> wrote: > On Wednesday 30 July 2014 06:37:31 Muhammad Shahzad wrote: > > Humm, no reply so far, may be because my email was very long and no body > > bothered to read it all. Anyways, here is the shorter more direct version > > of it. > > I read it all and my only though was: use a VPN. > > If someone wants to stop SIP, it has an easy to spot pattern. > If someone wants to stop VPN, they will drop every non clear connection > which > doesn't match a known non-VPN pattern. > > If I was afraid of my telco listening in on my SIP dialogs, I'd also want > to > encrypt RTP. Which is much more resource intensive than encrypting a few > SIP > messages. So if you think standard tls is to intensive you'll also have to > create some custom lightweight rtp mangling. > > _______________________________________________ > SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list > sr-users(a)lists.sip-router.org > http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users >

9 years, 8 months

Dialog module issue on OS/X

by Olle E. Johansson

I could not load the dialog module, because of a linking problem with the symbol destroy_dlg. Found that it's declared "inline" twice which may cause an issue. With this change, that I don't dare to commit myself, I could load dialog and explore it. Can someone take a look at this, someone that understands dialog and stuff? This was on OS/X. Thanks /O diff --git a/modules/dialog/dlg_hash.h b/modules/dialog/dlg_hash.h index 6994256..174ef15 100644 --- a/modules/dialog/dlg_hash.h +++ b/modules/dialog/dlg_hash.h @@ -214,7 +214,7 @@ static inline void unlink_unsafe_dlg(dlg_entry_t *d_entry, dlg_cell_t *dlg) * \brief Destroy a dialog, run callbacks and free memory * \param dlg destroyed dialog */ -inline void destroy_dlg(dlg_cell_t *dlg); +void destroy_dlg(dlg_cell_t *dlg); /*!

9 years, 8 months

git:master: dialog: documentation for timer_procs parameter

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: fcdf5f9cfff634ebfa736d7084d5e5483a36355b URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=fcdf5f9… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Wed Jul 30 15:27:09 2014 +0200 dialog: documentation for timer_procs parameter --- modules/dialog/README | 317 ++++++++++++++++++++--------------- modules/dialog/doc/dialog_admin.xml | 21 +++ 2 files changed, 199 insertions(+), 139 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=fcd…

9 years, 8 months

git:master: dialog: option to run dialog main timer tasks via dedicated process

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 1157db7c72b1629b72f4d06bd01c5bc694a816b2 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1157db7… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Wed Jul 30 15:15:40 2014 +0200 dialog: option to run dialog main timer tasks via dedicated process - timer_procs - new parameter, if set to 1, a dedicated timer process is used, if set to 0 (default), the core timer is used (existing behavior) - to add: option to work with many dedicated timer processes --- modules/dialog/dialog.c | 20 +++++++++++++++++--- 1 files changed, 17 insertions(+), 3 deletions(-) diff --git a/modules/dialog/dialog.c b/modules/dialog/dialog.c index 4495625..1baa714 100644 --- a/modules/dialog/dialog.c +++ b/modules/dialog/dialog.c @@ -109,6 +109,7 @@ str dlg_extra_hdrs = {NULL,0}; static int db_fetch_rows = 200; int initial_cbs_inscript = 1; int dlg_wait_ack = 1; +static int dlg_timer_procs = 0; int dlg_event_rt[DLG_EVENTRT_MAX]; @@ -285,6 +286,7 @@ static param_export_t mod_params[]={ { "ka_timer", INT_PARAM, &dlg_ka_timer }, { "ka_interval", INT_PARAM, &dlg_ka_interval }, { "timeout_noreset", INT_PARAM, &dlg_timeout_noreset }, + { "timer_procs", PARAM_INT, &dlg_timer_procs }, { 0,0,0 } }; @@ -614,9 +616,13 @@ static int mod_init(void) return -1; } - if ( register_timer( dlg_timer_routine, 0, 1)<0 ) { - LM_ERR("failed to register timer \n"); - return -1; + if(dlg_timer_procs<=0) { + if ( register_timer( dlg_timer_routine, 0, 1)<0 ) { + LM_ERR("failed to register timer \n"); + return -1; + } + } else { + register_sync_timers(1); } /* init handlers */ @@ -692,6 +698,14 @@ static int child_init(int rank) dlg_db_mode = dlg_db_mode_param; if(rank==PROC_MAIN) { + if(dlg_timer_procs>0) { + if(fork_sync_timer(PROC_TIMER, "Dialog Main Timer", 1 /*socks flag*/, + dlg_timer_routine, NULL, 1 /*every sec*/)<0) { + LM_ERR("failed to start main timer routine as process\n"); + return -1; /* error */ + } + } + if(dlg_ka_timer>0 && dlg_ka_interval>0) { if(fork_sync_timer(PROC_TIMER, "Dialog KA Timer", 1 /*socks flag*/, dlg_ka_timer_exec, NULL, dlg_ka_timer /*sec*/)<0) {

9 years, 8 months

git:master: core: fork_sync_timer() uses milisecond precision to catch up on delayed execution

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: d1c97010ed8d3c7a19580c20b8cd81c6a485eadf URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=d1c9701… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Wed Jul 30 15:03:45 2014 +0200 core: fork_sync_timer() uses milisecond precision to catch up on delayed execution - previously was using a step of a second --- timer_proc.c | 13 +++++++------ 1 files changed, 7 insertions(+), 6 deletions(-) diff --git a/timer_proc.c b/timer_proc.c index 4d58b1b..85734d2 100644 --- a/timer_proc.c +++ b/timer_proc.c @@ -222,16 +222,17 @@ int fork_sync_timer(int child_id, char* desc, int make_sock, if (pid<0) return -1; if (pid==0){ /* child */ - ts2 = interval; + ts2 = interval*1000; /* miliseconds */ if (cfg_child_init()) return -1; for(;;){ - if(ts2>0) sleep(ts2); - else sleep(1); - ts1 = get_ticks(); + if(ts2>0) sleep_us(ts2*1000); /* microseconds sleep */ + else sleep_us(1000); /* 1 milisecond sleep to catch up */ + ts1 = get_ticks_raw(); cfg_update(); - f(get_ticks(), param); /* ticks in s for compatibility with old + f(TICKS_TO_S(ts1), param); /* ticks in sec for compatibility with old timers */ - ts2 = interval - get_ticks() + ts1; + /* convert to mili-seconds and adjust the next sleep duration */ + ts2 = interval*1000 - TICKS_TO_MS(get_ticks_raw()) + TICKS_TO_MS(ts1); } } /* parent */

9 years, 8 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev July 2014