sr-dev May 2013

sr-dev@lists.kamailio.org

29 participants
319 discussions

git:master: core: fixed printing function name in log message
by Daniel-Constantin Mierla 17 May '13

17 May '13

Module: sip-router Branch: master Commit: e081c2880b46174ad836ab1f56e3062bb17b4332 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=e081c28… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 17 00:46:42 2013 +0200 core: fixed printing function name in log message - based on http://gcc.gnu.org/onlinedocs/gcc/Function-Names.html --- dprint.h | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/dprint.h b/dprint.h index 4a9fdbf..285c9f1 100644 --- a/dprint.h +++ b/dprint.h @@ -46,7 +46,7 @@ /* C >= 99 has __func__, older gcc versions have __FUNCTION__ */ #if __STDC_VERSION__ < 199901L -# if __GNUC__ >= 2 && defined __FUNCTION__ +# if __GNUC__ >= 2 # define _FUNC_NAME_ __FUNCTION__ # else # define _FUNC_NAME_ ""

1 0

[tracker] Comment added: tm:branch-failure event_route is not executed on all branch failures
by sip-router 17 May '13

17 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#296 - tm:branch-failure event_route is not executed on all branch failures User who did this - Juha Heinanen (jh) ---------- the second alternative sounds better to me, because it unifies the behavior of tcp and udp failures and also triggers failure route if all branches fail. the timer should trigger as soon as the implementation allows it to happen in order to avoid the long re-transmission wait that we currently have in case of udp failures. ---------- More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=296#comment871 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: Incorrect outbound interface used in Via and Record-Route
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#241 - Incorrect outbound interface used in Via and Record-Route User who did this - Daniel-Constantin Mierla (miconda) ---------- Default is to use the first one -- you can enable mhomed for multiple interfaces where the outbound interface has to be selected ---------- More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=241#comment870 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task closed: usrloc module stops updating some records in db_mode 2
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#278 - usrloc module stops updating some records in db_mode 2 User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Fixed More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=278 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: UAC generates messages with a NULL body which failes in SANITY module check
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#295 - UAC generates messages with a NULL body which failes in SANITY module check User who did this - Daniel-Constantin Mierla (miconda) ---------- Looked a bit over the code and should not set any message body in this case. Can you paste such message to see exactly how it looks? ---------- More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=295#comment869 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task changed: force_send_socket() doesnt set the source IP address reliably when using uac_req_send()
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has been changed. The changes are listed below. For full information about what has changed, visit the URL and click the History tab. FS#294 - force_send_socket() doesnt set the source IP address reliably when using uac_req_send() User who did this: Daniel-Constantin Mierla (miconda) Task Type: Bug Report -> Improvement More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=294 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: force_send_socket() doesnt set the source IP address reliably when using uac_req_send()
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#294 - force_send_socket() doesnt set the source IP address reliably when using uac_req_send() User who did this - Daniel-Constantin Mierla (miconda) ---------- force_send_socket() sets the socket in the current SIP message structure, but uac_req() creates a completely new one. This is more an enhancement, requiring to add something like $uac_req(send_socket) ---------- More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=294#comment868 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task closed: modules/usrloc: ul.dump RPC command doesn't dump the right q value
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#291 - modules/usrloc: ul.dump RPC command doesn't dump the right q value User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Fixed Additional comments about closing: Patch applied. More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=291 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task closed: usrloc: use 6th param on add function to set the contact path
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#292 - usrloc: use 6th param on add function to set the contact path User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Implemented Additional comments about closing: Applied. Don't forget to add a note about it in wiki at: http://www.kamailio.org/wiki/features/new-in-devel More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=292 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Task closed: utils/kamctl: add contact path parameter
by sip-router 16 May '13

16 May '13

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task is now closed: FS#293 - utils/kamctl: add contact path parameter User who did this - Daniel-Constantin Mierla (miconda) Reason for closing: Implemented Additional comments about closing: Applied. Don't forget to add a note about it in the wiki: http://www.kamailio.org/wiki/features/new-in-devel More information can be found at the following URL: https://sip-router.org/tracker/index.php?do=details&task_id=293 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

← Newer
1
...
18
19
20
21
22
23
24
...
32
Older →

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev May 2013