sr-dev June 2011

sr-dev@lists.kamailio.org

32 participants
167 discussions

[tracker] Comment added: Gentoo ebuild/pkg
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#134 - Gentoo ebuild/pkg User who did this - Henning Westerholt (henningw) ---------- > Would it be complex to make a dedicated ebuild spec for a specific flavor? I'm thinking that might be > easier not to remember all the pArameters to customize the flavors. Gentoo users tend to like this use flags, and there is also an easy way to query the available flags of packages: http://www.gentoo.org/doc/en/handbook/handbook-x86.xml?part=2&chap=2#doc_ch… ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=134#comment219 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: Gentoo ebuild/pkg
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#134 - Gentoo ebuild/pkg User who did this - Daniel-Constantin Mierla (miconda) ---------- There are two flavors actually, ser and kamailio. Just at some point sip-router was kind of aliased/alerts the ser flavor, adding some confusion. Perhaps the whole thing needs a bit of review and cleanup. Is it working with the groups of modules from Makefile? Kamailio uses groups prefixed with k, like standard. Would it be complex to make a dedicated ebuild spec for a specific flavor? I'm thinking that might be easier not to remember all the pArameters to customize the flavors. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=134#comment218 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: Gentoo ebuild/pkg
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#134 - Gentoo ebuild/pkg User who did this - Claudio Furrer (caio) ---------- Hi Daniel, You can package any of both flavours just by specifying it in the USE flag when emerging it. It's a whole sip-router package which you can make your preferred flavour. For example, by doing: $ USE="flavour_kamailio debug group_standard group_mysql avpops" emerge sip-router (here you will build kamailio flavours (kamailio as main name for binaries) including avpops module, mysql group and modules of the standard group, with mode debug ON). $ USE="flavour_ser debug group_standard group_mysql avpops" emerge sip-router (same as above but with SER as main name of binaries). If you don't specify the flavour, the main name will be "sip-router", as the Makefile.diff does modify de $MAIN_NAME variable. It used to be "ser" if not flavour were specified, but I did a Makefile.diff by myself just to fix it. Maybe it's wrong, but just for my convenience I did it that way. Hope it helps its usage. Regards. ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=134#comment217 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Comment added: Gentoo ebuild/pkg
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#134 - Gentoo ebuild/pkg User who did this - Daniel-Constantin Mierla (miconda) ---------- Thanks Claudio! At this momonet we package either kamailio or ser. I was looking quickly into the tarball, but since I am not really familiar with ebuild system, I am not sure if one can build the two out of these specs, or it is building one package including everything? If cannot build ser or kamailio flavours, what it would take to make one per each flavour? ---------- More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=134#comment216 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

Patch to fix definitions for RLS related tables. Size of callid and contact should be larger than 64.
by Peter Dunkley 09 Jun '11

09 Jun '11

Please find attached a patch to increase the size of RLS callid and contact database fields. This is the RLS version of the recent presence update by Marius Zbihlei Regards, Peter -- Peter Dunkley Technical Director Crocodile RCS Ltd

2 2

New developer: Peter Dunkley
by Daniel-Constantin Mierla 09 Jun '11

09 Jun '11

Hello, just to let everyone to know that starting with today Peter got developer access to GIT repository. He sent many patches in the past months to fix issues or add new features to presence modules (e.g., OMA extensions to embedded XCAP server) -- some are pending to be committed and expect more to come, as he is continuing to work with this part of SIP server. The user id is 'pd'. Cheers, Daniel -- Daniel-Constantin Mierla -- http://www.asipto.com http://linkedin.com/in/miconda -- http://twitter.com/miconda

1 0

[tracker] Task opened: Gentoo ebuild/pkg (Attachment added)
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Claudio Furrer (caio) Attached to Project - sip-router Summary - Gentoo ebuild/pkg Task Type - Improvement Category - Core Status - Assigned Assigned To - Andrei Pelinescu-Onciul Operating System - Linux Severity - Low Priority - Normal Reported Version - 3.1 Due in Version - Undecided Due Date - Undecided Details - Added an experimental ebuild to install sip-router 3.1.x under Gentoo Linux. Also have this ebuild in an external overlay if you want/need to link it. Test it and I would appreciate any feedback. One or more files have been attached. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=134 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

[tracker] Assignee added: Gentoo ebuild/pkg
by sip-router 09 Jun '11

09 Jun '11

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A user has added themself to the list of users assigned to this task. FS#134 - Gentoo ebuild/pkg User who did this - Claudio Furrer (caio) http://sip-router.org/tracker/index.php?do=details&task_id=134 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

1 0

Possible PUA bug
by Peter Dunkley 09 Jun '11

09 Jun '11

Hello, I am working with Kamailio RLS which uses PUA as a library to send SUBSCRIBEs. Whenever Kamailio receives an RLS subscription it calls rls_handle_subscribe(). rls_handle_subscribe() calls the function resource_subscriptions() which in turn calls send_resource_subs() (via process_list_and_exec()). resource_subscriptions() and send_resource_subs() fill in a subs_info_t structure that is passed into the PUA module send_subscribe() function. The key part is that send_resource_subs() sets the subs_info_t remote_target field to the pres_uri. The PUA send_subscribe() function uses the remote_target as the remote_contact (in the ua_pres_t structure) that is used to lookup the dialog in the PUA hash table. Unfortunately, this lookup always fails because the PUA module correctly updates the remote contact in the hash table when it gets a response back from the (Kamailio) presence server. The effect that this has is that any re-SUBSCRIBE requests from the RLS module are treated as new initial SUBSCRIBEs. This causes the pua and (presence) watchers tables in my Kamailio database to grow rapidly, and can result in multiple notifications on a presence status change. I noticed this because I am currently adding a new API to RLS which will allow me to update my RLS subscriptions whenever my resource list documents change. This is needed so that subscribers receive an immediate presence authorisation request when someone adds them to their contact list. The client I am testing with tends to update the RLS documents frequently (often for superficial changes) and this combined with the PUA issue described above means with just two clients on the system (with only each other in the contact list) I can end up with many 10s of records in pua and watchers within a few minutes. This issue will also have a lesser effect when RLS re-SUBSCRIBEs from clients occur. There will be a window (until the original SUBSCRIBE expires) when there are multiple back-end SUBSCRIBE dialogs for each contact. Can anyone advise on this issue and suggest a solution? Regards, Peter -- Peter Dunkley Technical Director Crocodile RCS Ltd

2 2

git:master: core: IPv6 addr enclosed in square brackets for process descripton
by Daniel-Constantin Mierla 07 Jun '11

07 Jun '11

Module: sip-router Branch: master Commit: 5629f449af98134c05c0679588de906a414364ab URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=5629f44… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Jun 7 23:19:18 2011 +0200 core: IPv6 addr enclosed in square brackets for process descripton - UDP and SCTP listeners will have the IPv6 address in between square brackets inside the description string --- main.c | 16 ++++++++++++++-- 1 files changed, 14 insertions(+), 2 deletions(-) diff --git a/main.c b/main.c index d525fb4..22ed613 100644 --- a/main.c +++ b/main.c @@ -1541,9 +1541,15 @@ int main_loop() /* udp processes */ for(si=udp_listen; si; si=si->next){ for(i=0;i<children_no;i++){ - snprintf(si_desc, MAX_PT_DESC, "udp receiver child=%d " + if(si->address.af==AF_INET6) { + snprintf(si_desc, MAX_PT_DESC, "udp receiver child=%d " + "sock=[%s]:%s", + i, si->name.s, si->port_no_str.s); + } else { + snprintf(si_desc, MAX_PT_DESC, "udp receiver child=%d " "sock=%s:%s", i, si->name.s, si->port_no_str.s); + } child_rank++; pid = fork_process(child_rank, si_desc, 1); if (pid<0){ @@ -1566,9 +1572,15 @@ int main_loop() if (!sctp_disable){ for(si=sctp_listen; si; si=si->next){ for(i=0;i<sctp_children_no;i++){ - snprintf(si_desc, MAX_PT_DESC, "sctp receiver child=%d " + if(si->address.af==AF_INET6) { + snprintf(si_desc, MAX_PT_DESC, "sctp receiver child=%d " + "sock=[%s]:%s", + i, si->name.s, si->port_no_str.s); + } else { + snprintf(si_desc, MAX_PT_DESC, "sctp receiver child=%d " "sock=%s:%s", i, si->name.s, si->port_no_str.s); + } child_rank++; pid = fork_process(child_rank, si_desc, 1); if (pid<0){

1 0

← Newer
1
...
10
11
12
13
14
15
16
17
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev June 2011