sr-dev October 2011

sr-dev@lists.kamailio.org

37 participants
283 discussions

by Timo Reimann

Hey all, this is just to let everybody know that my email contact has changed to sr(a)foo-lounge.de . Of course, I'm still on the lists but if anyone aware of my former email address wishes to contact me directly, please refer to the new address in the future. Thanks a lot and cheers, --Timo

12 years, 5 months

git:tma0/iptrtpproxy-v2: Always_flags enhacement to support asymetric RTP clients

by Tomas Mandys

Module: sip-router Branch: tma0/iptrtpproxy-v2 Commit: 1dd018ec161e00b847696a6b95d471264b7f99ce URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1dd018e… Author: Tomas Mandys <tomas.mandys(a)iptel.org> Committer: Tomas Mandys <tomas.mandys(a)iptel.org> Date: Thu Oct 27 22:27:35 2011 +0200 Always_flags enhacement to support asymetric RTP clients Always_flags may allow to forward packets received from diffrent ip:port than was introduced in SDP offer/answer. --- modules/iptrtpproxy/doc/iptrtpproxy.xml | 16 ++++- modules/iptrtpproxy/iptrtpproxy.c | 95 +++++++++++++++++++++---------- 2 files changed, 78 insertions(+), 33 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=1dd…

12 years, 5 months

git:tma0/iptrtpproxy-v2: - do not parse a= lines for disabled m= sections

by Tomas Mandys

Module: sip-router Branch: tma0/iptrtpproxy-v2 Commit: 771bd72e47e37442789a64b8cb3fd9401f69abee URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=771bd72… Author: Tomas Mandys <tomas.mandys(a)iptel.org> Committer: Tomas Mandys <tomas.mandys(a)iptel.org> Date: Wed Sep 7 18:46:28 2011 +0200 - do not parse a= lines for disabled m= sections --- modules/iptrtpproxy/iptrtpproxy.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-) diff --git a/modules/iptrtpproxy/iptrtpproxy.c b/modules/iptrtpproxy/iptrtpproxy.c index 3ab0c10..d2ddf7c 100644 --- a/modules/iptrtpproxy/iptrtpproxy.c +++ b/modules/iptrtpproxy/iptrtpproxy.c @@ -825,6 +825,9 @@ static int parse_sdp_content(struct sip_msg* msg, struct sdp_session *sess) { break; case 'a': + if (sess_fl == 2 && sess->media[sess->media_count-1].port == 0) { + break; /* ignore parameters of disabled media section */ + } i = name2enum(&lvalue, &send_rec_modifiers); if (i > 0) { switch (sess_fl) {

12 years, 5 months

Improving "get_body_part" (parse_body)

by Luis Martin Gil

Hello, I'm developing a module for Kamailio. I had to use some features that weren't developed so I implemented them by myself. I made a new function that can replace the existing get_body_part() of the "parser/parse_body.c" module. char *get_body_part(struct sip_msg *msg, unsigned short type, unsigned short subtype, int *len) This function allows you to pick the first multipart part of the SIP message which matches TYPE/SUBTYPE. It will return a pointer to the multipart structure as well as its length. The code it is not easy-readable but this function is working great. The point is, what if I would like to search a multipart part within a SIP message that matches TYPE/SUBTYPE but also the Content-ID header or the Content-Length header? I made this function: char *get_body_part_strict(struct sip_msg *msg, unsigned short content_type, unsigned short content_subtype, char *content_id, char *content_length, int *len) It returns the first multipart part of the SIP message which matches "TYPE/SUBTYPE" and/or the "Content-ID" and/or the "Content-Length", and its length. If you want to be less restrictive, you can unflag the parameter by: - setting 0/0 in case of the TYPE/SUBTYPE. - setting NULL in case of the Content-ID and the Content-Length. So setting Content-Length == NULL will make the function to skip the Content-Length from its filter and will give you back the first part which matches the TYPE/SUBTYPE and Content-ID, and its length. I think this could be very useful for someone who wants to retrieve specific parts of the multipart, this was my case. I would really like to contribute back to Kamailio platform back and I would appreciate if anyone can point me the correct contact information to check the viability of this adding. Thanks, Luis Martin Gil

12 years, 5 months

git:master: dispatcher(k): clarification about trying transition state from active to inactive

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 0b8f2ee4c128cd2b532356087272445519c1c08b URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=0b8f2ee… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 16:45:17 2011 +0200 dispatcher(k): clarification about trying transition state from active to inactive --- modules_k/dispatcher/README | 14 ++++++++------ modules_k/dispatcher/doc/dispatcher_admin.xml | 9 ++++++--- 2 files changed, 14 insertions(+), 9 deletions(-) diff --git a/modules_k/dispatcher/README b/modules_k/dispatcher/README index 19b17de..4d3403d 100644 --- a/modules_k/dispatcher/README +++ b/modules_k/dispatcher/README @@ -559,12 +559,14 @@ Note 3.21. ds_probing_threshhold (int) - If you want to set a gateway into probing mode, you will need a - specific number of requests until it will change from "active" to - probing. The number of attempts can be set with this parameter. This - parameter can be modified via ser config framework. - - Default value is "3". + If you want to set a gateway into inactive mode, there can be a + specific number of failed requests until it will change from "active" + to "inactive". It is using the state "trying", that allows selection of + gateway but indicates there was a failure previously with the gateway. + The number of attempts can be set with this parameter. This parameter + can be modified via ser config framework. + + Default value is "1" (set inactive with first failure). Example 1.22. Set the "ds_probing_threshhold" parameter ... diff --git a/modules_k/dispatcher/doc/dispatcher_admin.xml b/modules_k/dispatcher/doc/dispatcher_admin.xml index 9fc5fdb..037ad19 100644 --- a/modules_k/dispatcher/doc/dispatcher_admin.xml +++ b/modules_k/dispatcher/doc/dispatcher_admin.xml @@ -542,13 +542,16 @@ modparam("dispatcher", "force_dst", 1) <section> <title><varname>ds_probing_threshhold</varname> (int)</title> <para> - If you want to set a gateway into probing mode, you will need a specific number of requests until it will change from "active" to probing. - The number of attempts can be set with this parameter. + If you want to set a gateway into inactive mode, there can be + a specific number of failed requests until it will change from "active" + to "inactive". It is using the state "trying", that allows selection + of gateway but indicates there was a failure previously with the + gateway. The number of attempts can be set with this parameter. This parameter can be modified via ser config framework. </para> <para> <emphasis> - Default value is <quote>3</quote>. + Default value is <quote>1</quote> (set inactive with first failure). </emphasis> </para> <example>

12 years, 5 months

git:master: dispatcher(k): default probing threshold set to 1

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 7330cbc114821732b4f8bed5a43893226a800198 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=7330cbc… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 16:44:44 2011 +0200 dispatcher(k): default probing threshold set to 1 --- modules_k/dispatcher/dispatcher.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/modules_k/dispatcher/dispatcher.c b/modules_k/dispatcher/dispatcher.c index 52d3b07..edbbade 100644 --- a/modules_k/dispatcher/dispatcher.c +++ b/modules_k/dispatcher/dispatcher.c @@ -104,7 +104,7 @@ unsigned short attrs_avp_type; pv_elem_t * hash_param_model = NULL; -int probing_threshhold = 3; /* number of failed requests, before a destination +int probing_threshhold = 1; /* number of failed requests, before a destination is taken into probing */ str ds_ping_method = {"OPTIONS",7}; str ds_ping_from = {"sip:dispatcher@localhost", 24};

12 years, 5 months

git:master: man page: updated with the new -I command line option

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 3c45a4680f545c6a5c9041db52fa5f013dc19f48 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=3c45a46… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 16:11:14 2011 +0200 man page: updated with the new -I command line option --- sip-router.8 | 5 ++++- 1 files changed, 4 insertions(+), 1 deletions(-) diff --git a/sip-router.8 b/sip-router.8 index 39be904..a45a585 100644 --- a/sip-router.8 +++ b/sip-router.8 @@ -8,7 +8,7 @@ sip-router \- very fast and configurable sip proxy .SH SYNOPSIS .B sip-router [ -.B \-hcrRvdDEVT +.B \-hcrRvdDEVTI ] [ .BI \-f " config\-file" ] [ @@ -86,6 +86,9 @@ Disables TCP support. .BI \-V Displays the version number. .TP +.BI \-I +Displays details of internal constants and attributes. +.TP .BI \-f " config\-file" Reads the configuration from .B " config\-file"

12 years, 5 months

git:master: dispatcher(k): docs update and rebuild readme file

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: 372b113b6bd4447dfd73b8b6da6a5672730a5636 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=372b113… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 16:07:33 2011 +0200 dispatcher(k): docs update and rebuild readme file --- modules_k/dispatcher/README | 46 ++++++++++++--------- modules_k/dispatcher/doc/dispatcher_admin.xml | 55 +++++++++++++++--------- 2 files changed, 61 insertions(+), 40 deletions(-) diff --git a/modules_k/dispatcher/README b/modules_k/dispatcher/README index 4ee0370..19b17de 100644 --- a/modules_k/dispatcher/README +++ b/modules_k/dispatcher/README @@ -751,25 +751,28 @@ ds_select_dst("1", "$var(a)"); 4.5. ds_mark_dst([state]) - Mark the last used address from destination set as inactive - ("i"/"I"/"0"), active ("a"/"A"/"1") or probing ("p"/"P"/"2"). With this - function, an automatic detection of failed gateways can be implemented. - When an address is marked as inactive, it will be ignored by - 'ds_select_dst' and 'ds_select_domain'. + Mark the last used address from destination set as inactive ("i"/"I"), + active ("a"/"A"), disabled ("d"/"D") or trying ("t"/"T"). Apart of + disabled state, a destination can be set in probing mode by adding + ("p"/"P") flag. With this function, an automatic detection of failed + gateways can be implemented. When an address is marked as inactive or + disabled, it will be ignored by 'ds_select_dst' and 'ds_select_domain'. The parameter state is optional, when it is missing, then the destination will be marked inactive (i.e., same as 'i'). Possible values for state parameter: - * "i", "I" or "0" - the last destination should be set to inactive - and will be ignored in future requests. - * "a", "A" or "1" - the last destination should be set to active and - the error-counter should set to "0". - * "p", "P" or "2" - the last destination will be set to probing. This + * "a" or "A" - the last destination should be set to active and the + error-counter should set to "0". + * "i" or "I" - the last destination should be set to inactive and + will be ignored in future requests. + * "t" or "T" - the last destination should be set to temporary trying + state and failure counter is incremented. When the failure counter + reaches the threshold, the destination will be set inactive. + * "p" and "P" - this has to be used in addition to one of the + previous flags - the last destination will be set to probing. This mean the destination will be pinged with SIP OPTIONS requests from - time to time to detect if it is up running or down. Note: You will - need to call this function "threshhold"-times, before it will be - actually set to probing. + time to time to detect if it is up running or down. This function can be used from REQUEST_ROUTE, FAILURE_ROUTE. @@ -778,7 +781,7 @@ ds_select_dst("1", "$var(a)"); failure_route[tryagain] { ... if(t_check_status("500")) - ds_mark_dst("i"); + ds_mark_dst("ip"); # set to inactive and probing ... } ... @@ -860,9 +863,10 @@ onreply_route { * _state_ : state of the destination address + "a": active + "i": inactive + + "t": trying + "d": disabled - The states "a" or "i" can be followed by "p" to set probing mode - (e.g. 'ap' or 'ip') + The states "a", "i" or "t" can be followed by "p" to set probing + mode (e.g. 'ap', 'ip' or 'tp'). * _group_: destination group id * _address_: address of the destination in the _group_ @@ -916,14 +920,18 @@ onreply_route { * _state_ : state of the destination address + "a": active + "i": inactive + + "t": trying + "d": disabled - The states "a" or "i" can be followed by "p" to set probing mode - (e.g. 'ap' or 'ip') + The states "a", "i" or "t" can be followed by "p" to set probing + mode (e.g. 'ap', 'ip' or 'tp'). * _group_: destination group id * _address_: address of the destination in the _group_ Example: - sercmd dispatcher.set_state _state_ _group_ _address_ +... +# prototype: sercmd dispatcher.set_state _state_ _group_ _address_ +sercmd dispatcher.set_state ip 2 sip:127.0.0.1:5080 +... 6.2. dispatcher.list diff --git a/modules_k/dispatcher/doc/dispatcher_admin.xml b/modules_k/dispatcher/doc/dispatcher_admin.xml index 273c68c..9fc5fdb 100644 --- a/modules_k/dispatcher/doc/dispatcher_admin.xml +++ b/modules_k/dispatcher/doc/dispatcher_admin.xml @@ -876,10 +876,11 @@ ds_select_dst("1", "$var(a)"); </title> <para> Mark the last used address from destination set as inactive - ("i"/"I"/"0"), active ("a"/"A"/"1") or probing ("p"/"P"/"2"). - With this function, an automatic detection of failed gateways - can be implemented. When an address is marked as - inactive, it will be ignored by 'ds_select_dst' and + ("i"/"I"), active ("a"/"A"), disabled ("d"/"D") or trying ("t"/"T"). + Apart of disabled state, a destination can be set in probing mode by + adding ("p"/"P") flag. With this function, an automatic detection + of failed gateways can be implemented. When an address is marked as + inactive or disabled, it will be ignored by 'ds_select_dst' and 'ds_select_domain'. </para> <para> @@ -889,21 +890,28 @@ ds_select_dst("1", "$var(a)"); <para>Possible values for state parameter:</para> <itemizedlist> <listitem> - <para><emphasis>"i", "I" or "0"</emphasis> - the last destination + <para><emphasis>"a" or "A"</emphasis> - the last destination + should be set to active and the error-counter should set to "0". + </para> + </listitem> + <listitem> + <para><emphasis>"i" or "I"</emphasis> - the last destination should be set to inactive and will be ignored in future requests.</para> </listitem> <listitem> - <para><emphasis>"a", "A" or "1"</emphasis> - the last destination - should be set to active and the error-counter should set to "0".</para> + <para><emphasis>"t" or "T"</emphasis> - the last destination + should be set to temporary trying state and failure counter + is incremented. When the failure counter reaches the threshold, + the destination will be set inactive. + </para> </listitem> <listitem> - <para><emphasis>"p", "P" or "2"</emphasis> - the last destination + <para><emphasis>"p" and "P"</emphasis> - this has to be used in + addition to one of the previous flags - the last destination will be set to probing. This mean the destination will be pinged with SIP OPTIONS requests from time to time to detect if it is - up running or down. Note: You will need to call this - function "threshhold"-times, before it will be actually set - to probing.</para> + up running or down.</para> </listitem> </itemizedlist> <para> @@ -916,7 +924,7 @@ ds_select_dst("1", "$var(a)"); failure_route[tryagain] { ... if(t_check_status("500")) - ds_mark_dst("i"); + ds_mark_dst("ip"); # set to inactive and probing ... } ... @@ -1033,11 +1041,12 @@ onreply_route { <itemizedlist> <listitem><para> <quote>a</quote>: active</para></listitem> <listitem><para> <quote>i</quote>: inactive</para></listitem> + <listitem><para> <quote>t</quote>: trying</para></listitem> <listitem><para> <quote>d</quote>: disabled</para></listitem> </itemizedlist> - <para>The states <quote>a</quote> or <quote>i</quote> can be - followed by <quote>p</quote> to set probing mode (e.g. 'ap' - or 'ip')</para> + <para>The states <quote>a</quote>, <quote>i</quote> or + <quote>t</quote> can be followed by <quote>p</quote> + to set probing mode (e.g. 'ap', 'ip' or 'tp').</para> </listitem> <listitem><para>_group_: destination group id</para></listitem> @@ -1117,11 +1126,12 @@ onreply_route { <itemizedlist> <listitem><para> <quote>a</quote>: active</para></listitem> <listitem><para> <quote>i</quote>: inactive</para></listitem> + <listitem><para> <quote>t</quote>: trying</para></listitem> <listitem><para> <quote>d</quote>: disabled</para></listitem> </itemizedlist> - <para>The states <quote>a</quote> or <quote>i</quote> can be - followed by <quote>p</quote> to set probing mode (e.g. 'ap' - or 'ip')</para> + <para>The states <quote>a</quote>, <quote>i</quote> or + <quote>t</quote> can be followed by <quote>p</quote> + to set probing mode (e.g. 'ap', 'ip' or 'tp').</para> </listitem> <listitem><para>_group_: destination group id</para></listitem> @@ -1131,9 +1141,12 @@ onreply_route { <para> Example: </para> - <programlisting format="linespecific"> - sercmd dispatcher.set_state _state_ _group_ _address_ - </programlisting> +<programlisting format="linespecific"> +... +# prototype: sercmd dispatcher.set_state _state_ _group_ _address_ +sercmd dispatcher.set_state ip 2 sip:127.0.0.1:5080 +... +</programlisting> </section> <section> <title>

12 years, 5 months

git:master: dispatcher(k): new state trying for destination addresses

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: cbe2e236846e6527a2fc9e6b40b80befe329825b URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=cbe2e23… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 16:00:55 2011 +0200 dispatcher(k): new state trying for destination addresses - the state trying (t) is a transition between active to inactive, when inactive state is wanted after a certain number of failures specified in probing threshold - when in trying state, the destination is still selected, but additional settings of trying state will increment an internal failure counter which results in setting inactive state when probing threshold is matched - the functionality was before based on probing mode, but since 3.2 probing is not longer related to destination selection. This will provide back the lost functionality - ds_mark_dst(x) can have as parameter a combination between state and probing mode, such as 'ip' - inactive and probing, or ap - active and probing, or 'tp' - trying and probing --- modules_k/dispatcher/dispatch.c | 417 ++++++++++++++++++------------------- modules_k/dispatcher/dispatch.h | 10 +- modules_k/dispatcher/dispatcher.c | 80 +++++-- 3 files changed, 261 insertions(+), 246 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=cbe…

12 years, 5 months

git:master: core: new command line option -I

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: f5803916a37e0f2151335e65283060c6a88de9e0 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=f580391… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Thu Oct 27 05:09:03 2011 +0200 core: new command line option -I - print details about default internal attributes --- main.c | 35 ++++++++++++++++++++++++++++++++++- 1 files changed, 34 insertions(+), 1 deletions(-) diff --git a/main.c b/main.c index 5e4defa..741bdad 100644 --- a/main.c +++ b/main.c @@ -282,6 +282,34 @@ void print_ct_constants() #endif } +/* print compile-time constants */ +void print_internals() +{ + printf("Print out of %s internals\n", NAME); + printf(" Version: %s\n", full_version); + printf(" Default config: %s\n", CFG_FILE); + printf(" Default paths to modules: %s\n", MODS_DIR); + printf(" Compile flags: %s\n", ver_flags ); + printf(" MAX_RECV_BUFFER_SIZE=%d\n", MAX_RECV_BUFFER_SIZE); + printf(" MAX_LISTEN=%d\n", MAX_LISTEN); + printf(" MAX_URI_SIZE=%d\n", MAX_URI_SIZE); + printf(" BUF_SIZE=%d\n", BUF_SIZE); + printf(" DEFAULT PKG_SIZE=%uMB\n", PKG_MEM_SIZE); +#ifdef SHM_MEM + printf(" DEFAULT SHM_SIZE=%uMB\n", SHM_MEM_SIZE); +#endif +#ifdef ADAPTIVE_WAIT + printf(" ADAPTIVE_WAIT_LOOPS=%d\n", ADAPTIVE_WAIT_LOOPS); +#endif +#ifdef USE_TCP + printf(" TCP poll methods: %s\n", poll_support); +#endif + printf(" Source code revision ID: %s\n", ver_id); + printf(" Compiled with: %s\n", ver_compiler); + printf(" Compiled on: %s\n", ver_compiled_time); + printf("Thank you for flying %s!\n", NAME); +} + /* debugging function */ /* void receive_stdin_loop() @@ -1788,7 +1816,7 @@ int main(int argc, char** argv) daemon_status_init(); /* command line options */ - options= ":f:cm:M:dVhEb:l:L:n:vrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" + options= ":f:cm:M:dVIhEb:l:L:n:vrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:" #ifdef STATS "s:" #endif @@ -1898,6 +1926,10 @@ int main(int argc, char** argv) exit(0); break; + case 'I': + print_internals(); + exit(0); + break; case 'E': /* ignore it, was parsed immediately after startup */ break; @@ -2048,6 +2080,7 @@ try_again: case 'M': case 'd': case 'V': + case 'I': case 'h': case 'O': case 'A':

12 years, 5 months

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev October 2011