sr-dev October 2010

sr-dev@lists.kamailio.org

33 participants
336 discussions

git:master: Some minor tweaks to documentation for textopsx.
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: b495e34e507517cfac8ed2c921642c38b0f0262a URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=b495e34… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Wed Oct 6 03:04:09 2010 -0400 Some minor tweaks to documentation for textopsx. --- modules/textopsx/README | 13 ++++++------- modules/textopsx/doc/functions.xml | 12 ++++++------ 2 … [View More]files changed, 12 insertions(+), 13 deletions(-) diff --git a/modules/textopsx/README b/modules/textopsx/README index cece6b5..73d894b 100644 --- a/modules/textopsx/README +++ b/modules/textopsx/README @@ -28,11 +28,10 @@ Daniel-Constantin Mierla 1.2.1. msg_apply_changes() - Use this function to apply changes done on SIP request content. Be - careful when using this function -- due to special handling of changes - done to SIM message buffer so far, using this function might change the - behaviour of your config as it was so far -- do test properly your - config! + Use this function to apply changes performed on SIP request content. Be + careful when using this function; due to special handling of changes + done to SIP message buffer so far, using this function might change the + behaviour of your config. Do test your config properly! This function can be used from REQUEST_ROUTE. @@ -51,8 +50,8 @@ if(msg_apply_changes()) 1.2.2. change_reply_status(code, reason) - Change the status code and reason phrase of a SIP reply in - onreply_route. + Intercept a SIP reply (in an onreply_route) and change its status code + and reason phrase prior to propogating it. Meaning of the parameters is as follows: * code - Status code. diff --git a/modules/textopsx/doc/functions.xml b/modules/textopsx/doc/functions.xml index bc0fc38..9d7d4f6 100644 --- a/modules/textopsx/doc/functions.xml +++ b/modules/textopsx/doc/functions.xml @@ -10,11 +10,10 @@ <function moreinfo="none">msg_apply_changes()</function> </title> <para> - Use this function to apply changes done on SIP request content. Be - careful when using this function -- due to special handling of changes - done to SIM message buffer so far, using this function might change - the behaviour of your config as it was so far -- do test properly - your config! + Use this function to apply changes performed on SIP request content. Be + careful when using this function; due to special handling of changes + done to SIP message buffer so far, using this function might change + the behaviour of your config. Do test your config properly! </para> <para> This function can be used from REQUEST_ROUTE. @@ -42,7 +41,8 @@ if(msg_apply_changes()) <function>change_reply_status(code, reason)</function> </title> <para> - Change the status code and reason phrase of a SIP reply in onreply_route. + Intercept a SIP reply (in an onreply_route) and change its status code + and reason phrase prior to propogating it. </para> <para>Meaning of the parameters is as follows:</para> <itemizedlist> [View Less]

1 0

git:master: Added some clarifications and additional information to the ' geoip' docs.
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: 8c5375ff34b111807873cf6007886219d99d34ce URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=8c5375f… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Wed Oct 6 02:51:23 2010 -0400 Added some clarifications and additional information to the 'geoip' docs. --- modules/geoip/README | 37 ++++++++++++++++++++++++---------- modules/geoip/… [View More]doc/geoip_admin.xml | 39 ++++++++++++++++++++++++++++-------- 2 files changed, 56 insertions(+), 20 deletions(-) diff --git a/modules/geoip/README b/modules/geoip/README index 01c3d9d..11c8c73 100644 --- a/modules/geoip/README +++ b/modules/geoip/README @@ -10,7 +10,7 @@ Daniel-Constantin Mierla <miconda(a)gmail.com> - Copyright � 2010 Daniel-Constantin Mierla (asipto.com) + Copyright © 2010 Daniel-Constantin Mierla (asipto.com) __________________________________________________________________ Table of Contents @@ -60,12 +60,26 @@ Chapter 1. Admin Guide 1. Overview - The module loads exports a new class of pseudo-variables - - $gip(pvc=>key) - to access results upon a query against Max Mind GeoIP - database. + This module allows real-time queries against the Max Mind GeoIP + database to be performed from the config script. + + The Max Mind GeoIP database is a map of IP network address assignments + to geographical locales that can be useful -- though approximate -- in + identifying the physical location with which an IP host address is + associated on a relatively granular level. + + This database itself can be obtained on a free or commercial basis + here. The library that interfaces with the Max Mind API, as well as + scripts to automate downloading of the on-disk version of the + open-source database is also packaged by the Debian Linux distribution + and its derivatives as libgeoip, and probably by other distributions as + well. + + This module exports a new class of pseudo-variables - $gip(pvc=>key) - + to enable access to the results of a query to the database. Many queries can be done and store results in different containers to - be able to use in parallel. Database is loaded at startup in chache. + be able to use in parallel. Database is loaded at startup in cache. 2. Dependencies @@ -89,9 +103,9 @@ Chapter 1. Admin Guide 3.1. path (string) - Path to GeoIP database file. + Path to the GeoIP database file. - Default value is "null". + Default value is “null”. Example 1.1. Set path parameter ... @@ -104,8 +118,8 @@ modparam("geoip", "path", "/usr/local/share/GeoLiteCity.dat") 4.1. geoip_match(ipaddr, pvc) - Match ipaddr against GeoIP database and set the pvc container. The - function has to be called before accessing any $gip(pvc=>key). + Match ipaddr against the GeoIP database and set the pvc container. The + function has to be called before accessing a key via: $gip(pvc=>key). Example 1.2. geoip_match usage ... @@ -115,8 +129,9 @@ if(geoip_match("$si", "src")) 5. Exported pseudo-variables - * $gip(pvc=>key) - pvc is second parameter of geoip_match() and key - can be: + * $gip(pvc=>key) - pvc is an identifier for this query result; it is + designated by the second parameter of geoip_match(). The key can be + one of the following: + cc - country code + tz - time zone + zip - postal code diff --git a/modules/geoip/doc/geoip_admin.xml b/modules/geoip/doc/geoip_admin.xml index 89d2ede..b8c9f17 100644 --- a/modules/geoip/doc/geoip_admin.xml +++ b/modules/geoip/doc/geoip_admin.xml @@ -17,13 +17,32 @@ <section> <title>Overview</title> <para> - The module loads exports a new class of pseudo-variables - - $gip(pvc=>key) - to access results upon a query against Max Mind - GeoIP database. + This module allows real-time queries against the Max Mind GeoIP + database to be performed from the config script. + </para> + <para> + The Max Mind GeoIP database is a map of IP network address assignments + to geographical locales that can be useful -- though approximate -- + in identifying the physical location with which an IP host address + is associated on a relatively granular level. + </para> + <para> + This database itself can be obtained on a free or commercial basis + <ulink url="http://www.maxmind.com/app/ip-location">here</ulink>. The + library that interfaces with the Max Mind API, as well as scripts to + automate downloading of the on-disk version of the open-source + database is also packaged by the Debian Linux distribution and + its derivatives as <emphasis>libgeoip</emphasis>, and probably by + other distributions as well. + </para> + <para> + This module exports a new class of pseudo-variables - + $gip(pvc=>key) - to enable access to the results of a query to the + database. </para> <para> Many queries can be done and store results in different containers to - be able to use in parallel. Database is loaded at startup in chache. + be able to use in parallel. Database is loaded at startup in cache. </para> </section> <section> @@ -61,7 +80,7 @@ <section> <title><varname>path</varname> (string)</title> <para> - Path to GeoIP database file. + Path to the GeoIP database file. </para> <para> <emphasis> @@ -87,8 +106,8 @@ modparam("geoip", "path", "/usr/local/share/GeoLiteCity.dat") <function moreinfo="none">geoip_match(ipaddr, pvc)</function> </title> <para> - Match ipaddr against GeoIP database and set the pvc container. The - function has to be called before accessing any $gip(pvc=>key). + Match ipaddr against the GeoIP database and set the pvc container. The + function has to be called before accessing a key via: $gip(pvc=>key). </para> <example> <title><function>geoip_match</function> usage</title> @@ -107,8 +126,10 @@ if(geoip_match("$si", "src")) <title>Exported pseudo-variables</title> <itemizedlist> <listitem><para> - <emphasis>$gip(pvc=>key)</emphasis> - pvc is second - parameter of geoip_match() and key can be: + <emphasis>$gip(pvc=>key)</emphasis> - <emphasis>pvc</emphasis> is an + identifier for this query result; it is designated by the second + parameter of geoip_match(). The <emphasis>key</emphasis> can be one of + the following: </para> <itemizedlist> <listitem><para> [View Less]

1 0

git:master: Some clarification and cleanup to 'debugger' module docs.
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: 1e471eb0bfa60a40accddfeb01c7bb34259c1dd1 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1e471eb… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Wed Oct 6 02:32:23 2010 -0400 Some clarification and cleanup to 'debugger' module docs. --- modules/debugger/doc/debugger_admin.xml | 54 ++++++++++++++++--------------- 1 files changed, 28 … [View More]insertions(+), 26 deletions(-) diff --git a/modules/debugger/doc/debugger_admin.xml b/modules/debugger/doc/debugger_admin.xml index 78d5582..973028c 100644 --- a/modules/debugger/doc/debugger_admin.xml +++ b/modules/debugger/doc/debugger_admin.xml @@ -18,9 +18,9 @@ <title>Overview</title> <para> This module provides an interactive config file debugger. It can print - the trace of config execution for a SIP message to log and set - breakpoints on every config action, allowing to execute step by step the - config. + a trace of config execution for a SIP message to log and set + breakpoints on every config action, allowing step-by-step execution of + the config. </para> <para> Debugging can be done from local or remote host via RPC interface (e.g., @@ -35,9 +35,9 @@ </para> <para> When the SIP router process is stopped at a breakpoint, you can - investigate the values of any pseudo-varaibles. Note that some of - pseudo-variables may produce memory leak, that is planned to fix in the - future (here falls pseudo-variables with dynamic name such as htable, + investigate the values of any pseudo-variables. Note that some of + pseudo-variables may produce memory leaks; a fix is planned in the + future (here fall pseudo-variables with dynamic name such as htable, sqlops). References to SIP message, avps, headers, script and shared variables are safe. </para> @@ -120,7 +120,7 @@ modparam("debugger", "breakpoint", 1) <section> <title><varname>log_level</varname> (int)</title> <para> - What log level to be used to print module specific messages. + What log level is to be used to print module-specific messages. </para> <para> <emphasis> @@ -140,7 +140,7 @@ modparam("debugger", "log_level", 1) <section> <title><varname>log_facility</varname> (str)</title> <para> - What log facility to be used to print module specific messages. + What log facility is to be used to print module-specific messages. </para> <para> <emphasis> @@ -160,7 +160,7 @@ modparam("debugger", "log_facility", "LOG_DAEMON") <section> <title><varname>log_prefix</varname> (str)</title> <para> - String to print before any module specific messages. + String to print before any module-specific messages. </para> <para> <emphasis> @@ -181,11 +181,11 @@ modparam("debugger", "log_prefix", "from-debugger-with-love:") <title><varname>step_usleep</varname> (int)</title> <para> Microseconds to sleep before checking for new commands when - waiting at breakpoint + waiting at breakpoint. </para> <para> <emphasis> - Default value is <quote>100000</quote> (that is 0.1sec). + Default value is <quote>100000</quote> (that is 0.1 sec). </emphasis> </para> <example> @@ -203,7 +203,7 @@ modparam("debugger", "step_usleep", 500000) <para> How many sleeps of 'step_usleep' the RPC process performs when waiting for a reply from worker process before responding to RPC. - This avoids blocking RPC process for ever in case the worker + This avoids blocking RPC process forever in case the worker process 'forgets' to write back a reply. </para> <para> @@ -230,12 +230,13 @@ modparam("debugger", "step_loops", 100) <function moreinfo="none">dbg_breakpoint(mode)</function> </title> <para> - Anchor a breakpoint at that line in config. Mode specifies - whether the breakpoint is enabled (1) or disabled (0) at startup. + Anchor a breakpoint at the current line of the config (the one + on which this function is called). The 'mode' specifies whether + the breakpoint is enabled (1) or disabled (0) at startup. </para> <para> Note that this version does not export this anchors to RPC for - interactive debugging (temporary disabled). + interactive debugging (temporarily disabled). </para> <example> <title><function>dbg_breakpoint</function> usage</title> @@ -266,11 +267,11 @@ if($si=="10.0.0.10") </para> <para>Parameters:</para> <itemizedlist> - <listitem><para>_pid_ : pid for which to list the details. If it - missing, then will print for all processes.</para></listitem> + <listitem><para>_pid_ : pid for which to list the details. If 'pid' is + omitted then will print for all processes.</para></listitem> </itemizedlist> <para> - Examples for using with sercmd: + Examples of use with sercmd: </para> <programlisting format="linespecific"> dbg.ls @@ -291,10 +292,10 @@ if($si=="10.0.0.10") <para>Parameters:</para> <itemizedlist> <listitem><para>_cmd_ : inner command can be 'on' or 'off' to - enable or disable the tracing for one or all processe.</para> + enable or disable tracing for one or all processes.</para> </listitem> - <listitem><para>_pid_ : pid for which to list the details. If it - missing, then will print for all processes.</para> + <listitem><para>_pid_ : pid for which to list the details. If 'pid' is + omitted, then it will print details for all processes.</para> </listitem> </itemizedlist> <para> @@ -323,7 +324,8 @@ if($si=="10.0.0.10") the list of available values.</para> </listitem> <listitem><para>_pid_ : pid for which to apply the inner command. - If it is missing, then will be applied for all processes.</para> + If 'pid' is omitted, then the inner command will be applied + to all processes.</para> </listitem> <listitem><para>_params_ : extra params specific for each inner command.</para> @@ -393,7 +395,7 @@ if($si=="10.0.0.10") </para> <para> Another typical usage is to do interactive debugging and run - step-by-step each line in routing blocks of config file for a + each line of the route blocks of the config file step-by-step for a particular SIP message. </para> <para> @@ -460,7 +462,7 @@ sercmd> dbg.bp move 6402 ... </programlisting> <para> - Running config trace looks like: + Running the config trace looks like: </para> <programlisting format="linespecific"> ... @@ -501,11 +503,11 @@ sercmd> dbg.bp move 6402 ... </programlisting> <para> - Above example is for registration with default config for + The above example is for registration with default config for version 3.1.0, without authentication. Listed fields are: 'c' - config file; 'l' - line; 'a' - internal action id; 'n' - name of executed action. 'ERROR' prefix is printed - because these messages were sent to L_ERR log level. + because these messages were sent to the L_ERR log level. </para> </section> [View Less]

1 0

git:master: Cleaned up some grammatical errors and added some clarification to
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: 242054fc4c3091e8d1495e246fd86a373928f1e7 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=242054f… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Wed Oct 6 02:22:08 2010 -0400 Cleaned up some grammatical errors and added some clarification to blst module documentation. --- modules/blst/README | 19 ++++++++++--------- modules/… [View More]blst/doc/functions.xml | 13 +++++++------ 2 files changed, 17 insertions(+), 15 deletions(-) diff --git a/modules/blst/README b/modules/blst/README index 44b966e..74260de 100644 --- a/modules/blst/README +++ b/modules/blst/README @@ -4,7 +4,7 @@ Andrei Pelinescu-Onciul iptelorg GmbH - Copyright � 2007 iptelorg GmbH + Copyright © 2007 iptelorg GmbH Revision History Revision $Revision$ $Date$ __________________________________________________________________ @@ -50,8 +50,8 @@ else Adds the source of the current message to the blacklist for the time interval specified in the Retry-After header. If the Retry-After header is missing, it will fail (returns false). If the Retry-After value is - less then min, then min seconds will be used instead. If the - Retry-After value is greater then max, then max seconds will be used + less than min, then min seconds will be used instead. If the + Retry-After value is greater than max, then max seconds will be used instead. Example 2. blst_add_retry_after usage @@ -89,18 +89,19 @@ if (msg_status==503){ # blacklist 503 source for Retry-After seconds 1.2.5. blst_set_ignore() blst_set_ignore(flags) blst_rpl_set_ignore() blst_rpl_set_ignore(flags) - Set errors that will not be taken into account when deciding whether or - not to blacklist a destination for the current message or a local reply - to the current message. + Set errors that will not be taken into account when deciding whether to + blacklist a destination for the current message or a local reply to the + current message. blst_set_ignore(..) works for forwarding the current message and blst_rpl_set_ignore(...) works for local replies to the current message. - The variants with no parameters will ignore everything (equivalent with - passing 0xff). + The variants of these functions with no parameters will ignore + everything (equivalent to passing 0xff). - The following flags are defined: + The flags are stored internally as a bitmask, and are applied by + bitwise ANDing them together. The following flags are available: * 0x02 - generic send error (send denied/ failed). * 0x04 - connect failed (TCP, TLS or SCTP). * 0x08 - ICMP error (not currently used). diff --git a/modules/blst/doc/functions.xml b/modules/blst/doc/functions.xml index 86bd87b..3c80996 100644 --- a/modules/blst/doc/functions.xml +++ b/modules/blst/doc/functions.xml @@ -48,10 +48,10 @@ else header. If the <emphasis>Retry-After</emphasis> header is missing, it will fail (returns false). - If the <emphasis>Retry-After</emphasis> value is less then + If the <emphasis>Retry-After</emphasis> value is less than <varname>min</varname>, then <varname>min</varname> seconds will be used instead. - If the <emphasis>Retry-After</emphasis> value is greater then + If the <emphasis>Retry-After</emphasis> value is greater than <varname>max</varname>, then <varname>max</varname> seconds will be used instead. </para> @@ -117,7 +117,7 @@ if (msg_status==503){ # blacklist 503 source for Retry-After seconds </title> <para> Set errors that will not be taken into account when deciding - whether or not to blacklist a destination for the current message + whether to blacklist a destination for the current message or a local reply to the current message. </para> <para> @@ -126,11 +126,12 @@ if (msg_status==503){ # blacklist 503 source for Retry-After seconds works for local replies to the current message. </para> <para> - The variants with no parameters will ignore everything (equivalent - with passing 0xff). + The variants of these functions with no parameters will ignore + everything (equivalent to passing 0xff). </para> <para> - The following flags are defined: + The flags are stored internally as a bitmask, and are applied by + bitwise ANDing them together. The following flags are available: <itemizedlist> <listitem> <emphasis>0x02</emphasis> - generic send error (send denied/ [View Less]

1 0

git:master: Fixed typo in 'xhttp' module documentation.
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: fd2c02bb06d35dca81be2e5c40e4190c91c58603 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=fd2c02b… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Tue Oct 5 20:28:28 2010 -0400 Fixed typo in 'xhttp' module documentation. --- modules/xhttp/README | 2 +- modules/xhttp/doc/xhttp_admin.xml | 2 +- 2 files changed, 2 insertions(+… [View More]

1 0

git:master: Fixed a typo in 'matrix' module documentation.
by Alex Balashov 06 Oct '10

06 Oct '10

Module: sip-router Branch: master Commit: bf24a689d909656e8a580022bb62fd79b6849cac URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bf24a68… Author: Alex Balashov <abalashov(a)evaristesys.com> Committer: Alex Balashov <abalashov(a)evaristesys.com> Date: Tue Oct 5 20:27:10 2010 -0400 Fixed a typo in 'matrix' module documentation. --- modules/matrix/README | 18 +++++++++--------- modules/matrix/doc/matrix_admin.xml | 2 +- 2 files … [View More]changed, 10 insertions(+), 10 deletions(-) diff --git a/modules/matrix/README b/modules/matrix/README index b01ea30..da70e3c 100644 --- a/modules/matrix/README +++ b/modules/matrix/README @@ -11,7 +11,7 @@ Henning Westerholt 1&1 Internet AG <henning.westerholt(a)1und1.de> - Copyright � 2008 1&1 Internet AG + Copyright © 2008 1&1 Internet AG Revision History Revision $Revision: 4863 $ $Date: 2008-09-05 13:11:33 +0200 (Fri, 05 Sep 2008) $ @@ -142,7 +142,7 @@ Chapter 1. Admin Guide The URL for the database connection. - Default value is "mysql://openserro:openserro@localhost/openser". + Default value is “mysql://openserro:openserro@localhost/openser”. Example 1.1. Set db_url parameter ... @@ -153,7 +153,7 @@ modparam("matrix", "db_url", "mysql://openserro:openserro@localhost/openser") The name of the table containing the matrix data. - Default value is "matrix". + Default value is “matrix”. Example 1.2. Set matrix_table parameter ... @@ -164,7 +164,7 @@ modparam("matrix", "matrix_table", "matrix") The name of the column containing the first row in the matrix. - Default value is "first". + Default value is “first”. Example 1.3. Set matrix_first_col parameter ... @@ -175,7 +175,7 @@ modparam("matrix", "matrix_first_col", "first") The name of the column containing the second row in the matrix. - Default value is "second". + Default value is “second”. Example 1.4. Set matrix_second_col parameter ... @@ -186,7 +186,7 @@ modparam("matrix", "matrix_second_col", "second") The name of the column containing the result ID to be used. - Default value is "res". + Default value is “res”. Example 1.5. Set matrix_res_col parameter ... @@ -206,7 +206,7 @@ modparam("matrix", "matrix_res_col", "res") Example 1.6. matrix usage ... -if (!matrix("$avp(first)", "$(second)", "$avp(route_tree)")) +if (!matrix("$avp(first)", "$avp(second)", "$avp(route_tree)")) $avp(route_tree) = $avp(frst); # default routing as defined for source number } cr_route("$avp(route_tree)", "$rd", "$rU", "$rU", "call_id"); @@ -267,7 +267,7 @@ Chapter 2. Module parameter for database access. URL to the database containing the data. - Default value is "mysql://openserro:openserro@localhost/openser". + Default value is “mysql://openserro:openserro@localhost/openser”. Example 2.1. Set db_url parameter ... @@ -278,7 +278,7 @@ modparam("matrix", "db_url", "dbdriver://username:password@dbhost/dbname") Name of the matrix table for the matrix module. - Default value is "matrix". + Default value is “matrix”. Example 2.2. Set matrix_table parameter ... diff --git a/modules/matrix/doc/matrix_admin.xml b/modules/matrix/doc/matrix_admin.xml index 5db4149..ce334ad 100644 --- a/modules/matrix/doc/matrix_admin.xml +++ b/modules/matrix/doc/matrix_admin.xml @@ -175,7 +175,7 @@ modparam("matrix", "matrix_res_col", "res") <title><function>matrix</function> usage</title> <programlisting format="linespecific"> ... -if (!matrix("$avp(first)", "$(second)", "$avp(route_tree)")) +if (!matrix("$avp(first)", "$avp(second)", "$avp(route_tree)")) $avp(route_tree) = $avp(frst); # default routing as defined for source number } cr_route("$avp(route_tree)", "$rd", "$rU", "$rU", "call_id"); [View Less]

1 0

git:3.1: app_lua: fix finding lua libs
by Daniel-Constantin Mierla 05 Oct '10

05 Oct '10

Module: sip-router Branch: 3.1 Commit: 6e65634bb10568767700d999437ee5194765d6e8 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=6e65634… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Oct 5 23:38:20 2010 +0200 app_lua: fix finding lua libs - if pkg-config fails to find lua libs, use default values --- modules/app_lua/Makefile | 10 ++++++++-- 1 files changed, 8 … [View More]

1 0

unresolvable references
by Juha Heinanen 05 Oct '10

05 Oct '10

when i build debian package from master, i get from dpkg-shlibdeps these warnings. are they something to worry about? -- juha dpkg-shlibdeps: warning: debian/sip-proxy/usr/lib/sip-proxy/libsrdb1.so.1.0 contains an unresolvable reference to symbol core_cfg: it's probably a plugin. dpkg-shlibdeps: warning: 9 other similar warnings have been skipped (use -v to see them all). dpkg-shlibdeps: warning: debian/sip-proxy/usr/lib/sip-proxy/libkmi.so.1.0 contains an unresolvable reference to symbol … [View More]

2 1

git:3.1: ChangeLog: refurbished for version 3.1.0
by Daniel-Constantin Mierla 05 Oct '10

05 Oct '10

Module: sip-router Branch: 3.1 Commit: 0c5d4312e2859299caa93ac7ab4c9034d27dcd18 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=0c5d431… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Oct 5 21:51:15 2010 +0200 ChangeLog: refurbished for version 3.1.0 - built from git log since Jan 11, 2010 - no longer includes changes for old releases since it is too big --- ChangeLog |… [View More]

1 0

git:3.1: version set to 3.1.0-rc1
by Andrei Pelinescu-Onciul 05 Oct '10

05 Oct '10

Module: sip-router Branch: 3.1 Commit: ad9561071ad616b3b280d6ee0330e627286e662f URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=ad95610… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Date: Tue Oct 5 20:09:20 2010 +0200 version set to 3.1.0-rc1 --- Makefile.defs | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/Makefile.defs b/Makefile.defs index b6a0b59..c32f981 … [View More]

1 0

← Newer
1
...
21
22
23
24
25
26
27
...
34
Older →

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev October 2010