sr-dev May 2009

sr-dev@lists.kamailio.org

26 participants
263 discussions

git:master: * Added note on how to generate README of a module.

by Juha Heinanen

Module: sip-router Branch: master Commit: bcc002cb9cb1fef569357695ee073d7f531af3c9 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=bcc002c… Author: Juha Heinanen <jh(a)tutpro.com> Committer: Juha Heinanen <jh(a)tutpro.com> Date: Sun May 10 11:37:40 2009 +0300 * Added note on how to generate README of a module. --- INSTALL | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/INSTALL b/INSTALL index 4d659b0..e157b9a 100644 --- a/INSTALL +++ b/INSTALL @@ -411,6 +411,10 @@ make man Generates a manpage for all the modules that support it (.xml file in the module directory). +make modules=modules_k/foo modules-readme + +Generates README file for modules_k/foo. + Install: make prefix=/usr/local install

15 years

git:master: * Added support for adding extra headers into MESSAGEs sent out from

by Juha Heinanen

Module: sip-router Branch: master Commit: 4c8c5a7c091ea7213819d24b762affef69f4a0f0 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=4c8c5a7… Author: Juha Heinanen <jh(a)tutpro.com> Committer: Juha Heinanen <jh(a)tutpro.com> Date: Sat May 9 19:03:52 2009 +0300 * Added support for adding extra headers into MESSAGEs sent out from silo by m_dump(). --- modules_k/msilo/README | 602 +++++++++++++++++++++-------------- modules_k/msilo/doc/msilo.xml | 14 + modules_k/msilo/doc/msilo_admin.xml | 21 ++ modules_k/msilo/msfuncs.c | 11 +- modules_k/msilo/msfuncs.h | 2 +- modules_k/msilo/msilo.c | 42 +++- 6 files changed, 436 insertions(+), 256 deletions(-) Diff: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commitdiff;h=4c8…

15 years

git:master: rtimer: update to use the new sr core routes list

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: ac41ee015d26335986596eec1c8b28d8719f776a URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=ac41ee0… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 8 18:31:35 2009 +0200 rtimer: update to use the new sr core routes list --- modules_k/rtimer/rtimer_mod.c | 13 +++++++++---- 1 files changed, 9 insertions(+), 4 deletions(-) diff --git a/modules_k/rtimer/rtimer_mod.c b/modules_k/rtimer/rtimer_mod.c index d54124e..4313330 100644 --- a/modules_k/rtimer/rtimer_mod.c +++ b/modules_k/rtimer/rtimer_mod.c @@ -274,6 +274,7 @@ int stm_e_param(modparam_t type, void *val) stm_route_t *rt; stm_timer_t *nt; str s; + char c; if(val==NULL) return -1; @@ -291,7 +292,7 @@ int stm_e_param(modparam_t type, void *val) tmp.timer = pit->body; } else if(pit->name.len==5 && strncasecmp(pit->name.s, "route", 5)==0) { - str2int(&pit->body, &tmp.route); + s = pit->body; } } if(tmp.timer.s==NULL) @@ -315,10 +316,14 @@ int stm_e_param(modparam_t type, void *val) free_params(params_list); return -1; } - if(tmp.route>=RT_NO) + c = s.s[s.len]; + s.s[s.len] = '\0'; + tmp.route = route_get(&main_rt, s.s); + s.s[s.len] = c; + if(tmp.route == -1) { - LM_ERR("invalid route number: %u\n", - tmp.route); + LM_ERR("invalid route: %.*s\n", + s.len, s.s); free_params(params_list); return -1; }

15 years

git:master: core: removed fixup_pvar(param) prototype

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: e6949b5adb486ea2f14ab44c2af4c1ea9f4d127b URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=e6949b5… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 8 08:12:18 2009 +0200 core: removed fixup_pvar(param) prototype - no longer implemented as standalone function - use fixup_pvar_null(param, 1) instead --- mod_fix.h | 3 --- 1 files changed, 0 insertions(+), 3 deletions(-) diff --git a/mod_fix.h b/mod_fix.h index 613e11f..257d78c 100644 --- a/mod_fix.h +++ b/mod_fix.h @@ -117,7 +117,4 @@ int fixup_spve_null(void** param, int param_no); int fixup_spve_uint(void** param, int param_no); int fixup_spve_str(void** param, int param_no); - -int fixup_pvar(void **param); - #endif

15 years

git:master: statistics: use fixup_pvar_null()

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: a8e660b62bf6b6ca10d63078d6574ebdffc61fe2 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=a8e660b… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 8 08:15:12 2009 +0200 statistics: use fixup_pvar_null() - fixup_pvar() replaced by fixup_pvar_null() --- modules_k/statistics/statistics.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/modules_k/statistics/statistics.c b/modules_k/statistics/statistics.c index 45d0baf..ee6e61b 100644 --- a/modules_k/statistics/statistics.c +++ b/modules_k/statistics/statistics.c @@ -122,7 +122,7 @@ static int fixup_stat(void** param, int param_no) memset( sopv, 0 , sizeof(struct stat_or_pv) ); /* is it pv? */ if (s.s[0]=='$') { - if (fixup_pvar(param)!=0) { + if (fixup_pvar_null(param, 1)!=0) { LM_ERR("invalid pv %.s as parameter\n",s.s); return E_CFG; }

15 years

git:master: utils: use fixup_pvar_null()

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: d3c7fc1ef2d1e6b3078755c84b0c6f3ca302141d URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=d3c7fc1… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 8 08:14:47 2009 +0200 utils: use fixup_pvar_null() - fixup_pvar() replaced by fixup_pvar_null() --- modules_k/utils/utils.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/modules_k/utils/utils.c b/modules_k/utils/utils.c index 28819ec..068f74b 100644 --- a/modules_k/utils/utils.c +++ b/modules_k/utils/utils.c @@ -236,7 +236,7 @@ static int fixup_http_query(void** param, int param_no) } if (param_no == 2) { - if (fixup_pvar(param) != 0) { + if (fixup_pvar_null(param, 1) != 0) { LM_ERR("failed to fixup result pvar\n"); return -1; }

15 years

git:master: dialog: use fixup_pvar_null()

by Daniel-Constantin Mierla

Module: sip-router Branch: master Commit: efa24adc02e16933c0d0b2c16d68a631032add00 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=efa24ad… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Fri May 8 08:13:47 2009 +0200 dialog: use fixup_pvar_null() - fixup_pvar() replaced by fixup_pvar_null() --- modules_k/dialog/dialog.c | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/modules_k/dialog/dialog.c b/modules_k/dialog/dialog.c index 7a5d198..f7dc71b 100644 --- a/modules_k/dialog/dialog.c +++ b/modules_k/dialog/dialog.c @@ -301,7 +301,7 @@ static int fixup_get_profile2(void** param, int param_no) if (param_no==1) { return fixup_profile(param, 1); } else if (param_no==2) { - ret = fixup_pvar(param); + ret = fixup_pvar_null(param, 1); if (ret<0) return ret; sp = (pv_spec_t*)(*param); if (sp->type!=PVT_AVP && sp->type!=PVT_SCRIPTVAR) {

15 years

git:master: sercmd: doc added (README)

by Andrei Pelinescu-Onciul

Module: sip-router Branch: master Commit: b477f413dd740862de642790f6b3d80acc61dae0 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=b477f41… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Date: Thu May 7 22:23:12 2009 +0200 sercmd: doc added (README) --- utils/sercmd/EXAMPLES | 2 +- utils/sercmd/README | 217 +++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 218 insertions(+), 1 deletions(-) diff --git a/utils/sercmd/EXAMPLES b/utils/sercmd/EXAMPLES index b46542d..079dc6a 100644 --- a/utils/sercmd/EXAMPLES +++ b/utils/sercmd/EXAMPLES @@ -4,7 +4,7 @@ sercmd usage examples help: - sercmd unixd:/tmp/unix_dgram -h + sercmd -h use an udp ser control socket: ser config: diff --git a/utils/sercmd/README b/utils/sercmd/README new file mode 100644 index 0000000..1c9c823 --- /dev/null +++ b/utils/sercmd/README @@ -0,0 +1,217 @@ +# $Id$ +# +# History: +# -------- +# 2009-05-07 created by Andrei Pelinescu-Onciul <andrei(a)iptel.org> + + +Overview +======== + +sercmd is a unix tool for interfacing with sip-router using ser exported RPCs. +It uses binrpc (a proprietary protocol, designed for minimal packet size and +fast parsing) over a variety of transports (unix stream sockets, unix datagram + sockets, udp or tcp). +For more details on binrpc see the ctl module documentation +(modules_s/ctl/README). + +sercmd can work in command line mode (the RPC or command name is just another +command line parameter) or in interactive mode. The interactive mode supports +history and tab-completion (if sercmd was compiled with libreadline support). + +On ser side the ctl module must be loaded. + + +Usage +===== + + sercmd [options][-s address] [ cmd ] + +Options: + -s address unix socket name or host name to send the commands on + -R name force reply socket name, for the unix datagram socket mode + -D dir create the reply socket in the directory <dir> if no reply + socket is forced (-R) and an unix datagram socket is selected + as the transport + -f format print the result using format. Format is a string containing + %v at the places where values read from the reply should be + substituted. To print '%v', escape it using '%': %%v. + -v Verbose + -V Version number + -h Help message +address: + [proto:]name[:port] where proto is one of tcp, udp, unixs, unix or unixd + e.g.: tcp:localhost:2048 , unixs:/tmp/ser_ctl + If the protocol is not specified, unixs will be + used if name is a filesystem path and udp if not. + "unixs" or "unix" stand for unix stream sockets + and "unixd" for unix datagram sockets. +cmd: + method [arg1 [arg2...]] +arg: + string or number; to force a number to be interpreted as string + prefix it by "s:", e.g. s:1 + +If no address is specified (no -s), sercmd will use by default +unixs:/tmp/ser_ctl. This is also the default for the ctl module (if no + "binrpc" module parameters are present in the config). + + +Command Types +============= + +There are 3 types of commands: "raw" ser RPC, sercmd aliases and sercmd + builtins. + +The "raw" RPC commands work directly with ser with no change on the input or + the output. +All the RPCs can be seen using sercmd ls. + +The aliases are just other easier to remember names for some ser RPCs, which +some time include nicer formatting of the rpc result. +One can see all the defined aliases using: sercmd help|grep alias: . +Example: + ps is an alias for core.ps with the output formatted in a more readable way. + sercmd ps is equivalent to sercmd -f"%v\t%v\n" core.ps. + Without the formatting, the output of sercmd core.ps looks like: + +11262 +attendant +11268 +udp receiver child=0 sock=127.0.0.1:5060 +... + Using sercmd ps (or sercmd -f"%v\t%v\n" core.ps) the output looks like: + +11262 attendant +11268 udp receiver child=0 sock=127.0.0.1:5060 +... + +The built-in commands can combine several different rpcs. +One can see all the built-in commands using: sercmd help|grep builtin: . + + +Getting help on a command +========================= + +To get the help message associated with a command use +sercmd help <command_name>. +Example: +$ sercmd help ps +ps is an alias for core.ps with reply formatting: "%v\t%v\n" +$ sercmd help core.ps +Returns the description of running SER processes. + + +Listing all the commands +======================== + +To see all the available commands (ser RPCs, aliases and bultins) use + sercmd help. +To see only the "raw" RPCs, user sercmd ls. +Note: since each module can define its own RPCs, the available RPCs depend + on the loaded modules. + + +Examples +======== + +Using the default socket (requires only loadmodule "ctl" in ser.cfg): + +$ sercmd ps +11262 attendant +11268 udp receiver child=0 sock=127.0.0.1:5060 +11269 udp receiver child=1 sock=127.0.0.1:5060 +11270 udp receiver child=0 sock=192.168.1.101:5060 +11271 udp receiver child=1 sock=192.168.1.101:5060 +11272 slow timer +11273 timer +11274 ctl handler +11275 tcp receiver child=0 +11276 tcp receiver child=1 +11277 tcp main process + +$ sercmd help # list all the supported commands +dst_blacklist.add +ctl.who +... + +$ sercmd help core.uptime # help for the core.uptime rpc +Returns uptime of SER server. + +$ sercmd cfg.cfg_set_int_now debug 5 # turn debug level to 5 (needs cfg) + +$ sercmd # enters interactive mode + +Using a tcp socket +(assumes modparam("ctl", "binrpc", "tcp:localhost:2048") in ser.cfg) + +$ sercmd -s tcp:localhost:2048 core.version +Server: Sip EXpress router (2.1.0-dev23-make (i386/linux)) + +$ sercmd -s tcp:localhost:2048 SRV _sip._udp.iptel.org + name: _sip._udp.iptel.org + type: SRV + size (bytes): 104 + reference counter: 2 + expires in (s): 67693 + last used (s): 0 + error flags: 0 + rr name: sip.iptel.org + rr port: 5060 + rr priority: 0 + rr weight: 0 + rr expires in (s): 67693 + rr error flags: 0 + +sercmd -s tcp:127.0.0.1:2048 # enters interactive mode over tcp + +For more examples see utils/sercmd/EXAMPLES + [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=utils/se…]. + + +Interactive Mode +================ + +To enter the interactive mode start sercmd without specifying a command name + on the command line. +If sercmd was compiled with libreadline support (automatically if +libreadline dev files are installed), the interactive mode will have tab +completion and history support. + +Example: + +$ sercmd +sercmd 0.1 +Copyright 2006 iptelorg GmbH +This is free software with ABSOLUTELY NO WARRANTY. +For details type `warranty'. +sercmd> core.s<tab> +core.sctp_info core.sctp_options core.shmmem +sercmd> help core.shmmem +Returns shared memory info. +sercmd> core.shmmem +{ + total: 33554432 + free: 33147816 + used: 190644 + real_used: 406616 + max_used: 406616 + fragments: 2 +} +sercmd> quit + + +Related Stuff +============= + + +ctl module: required, implements binrpc on ser side, without it sercmd +doesn't work. +See modules_s/ctl/README + [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=modules_…]. + +cfg_rpc module: allows setting or reading configuration parameters on-the-fly. +For example one could change the tcp connection lifetime to 180s using: +$ sercmd cfg.set_now_int tcp.connection_lifetime 180 +See modules_s/cfg_rpc/README + [http://git.sip-router.org/cgi-bin/gitweb.cgi?p=sip-router;a=blob;f=modules_…].

15 years

Re: [SR-Dev] git:master: tmx: doc updated

by Jan Janak

(forwarding to sr-dev). Jan. On 07-05 14:34, Jan Janak wrote: > On 07-05 14:22, Henning Westerholt wrote: > > On Sonntag, 3. Mai 2009, Daniel-Constantin Mierla wrote: > > > 1. Admin Guide > > > > > > - 1.1. Overview > > > - 1.2. Dependencies > > > [..] > > > + 1. Overview > > > + 2. Dependencies > > > > Hi Jan, > > > > i noticed that the READMEs generated for modules_k looks now a bit > > different then the ones generated for the modules_s. The k ones uses "1.", > > the s ones "1.1", for the first chapter for example. > > This is because docbook documents in ser modules start with <section>, not > <book>, we do not use <book> and <chapter> tags anymore in our docbook > documents because it makes it hard to include such documents into other > documents. > > > Another thing that is > > missing both of them is modules_s READMEs, is the list of the examples. Is > > this a bug or do you wanted to change this? > > This was intentional. I think it makes no sense to have lists of examples in > short plain-text documents like the READMEs (there are no page numbers > anyway). > > I have also removed the list of functions and parameters. I think such lists > are only useful if you have page numbers, so that you can jump to the > corresponding function/parameter/example quickly, but READMEs have no page > numbers and the less boilerplate we have at the beginning of the document the > better, IMHO. > > Nevertheless, if people think that READMEs should have lists of functions and > parameters at the beginning, I can modify the templates and put it back. > > Jan.

15 years

git:master: test: port r5833 from kamailio

by Henning Westerholt

Module: sip-router Branch: master Commit: 030e80b538e6ec3f29a73fcc5660af86cb385926 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=030e80b… Author: Henning Westerholt <henning.westerholt(a)1und1.de> Committer: Henning Westerholt <henning.westerholt(a)1und1.de> Date: Thu May 7 18:09:11 2009 +0200 test: port r5833 from kamailio --- test/unit/3.sh | 9 +++++---- 1 files changed, 5 insertions(+), 4 deletions(-) diff --git a/test/unit/3.sh b/test/unit/3.sh index b336d8d..a5f808f 100755 --- a/test/unit/3.sh +++ b/test/unit/3.sh @@ -19,8 +19,9 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -# Needs a mysql database, the root user password must be given -# in the file 'dbrootpw' in the test directory +# Needs a mysql database, the root user password must be assigned to +# the 'PW' variable in the file 'dbrootpw' in the test directory, e.g.: +# PW=sql_root_passwd source include/common @@ -46,7 +47,7 @@ sed -i "s/TEST=\"false\"/TEST=\"true\"/g" $DBCTL # set the mysql root password cp $DBCTL.mysql $DBCTL.mysql.bak -sed -i "s/#PW=""/PW="$PW"/g" $DBCTL.mysql +sed -i "s/#PW=\"\"/PW=\"$PW\"/g" $DBCTL.mysql ./$DBCTL create $tmp_name > /dev/null ret=$? @@ -62,4 +63,4 @@ mv $DBCTL.mysql.bak $DBCTL.mysql mv $DBCTL.bak $DBCTL cd ../test -exit $ret \ No newline at end of file +exit $ret

15 years

← Newer
1
...
16
17
18
19
20
21
22
...
27
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev May 2009