sr-dev December 2009

sr-dev@lists.kamailio.org

26 participants
157 discussions

[tracker] Comment added: Add contact to target uri element in dialog-info+xml body (Attachment added)

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. The following task has a new comment added: FS#20 - Add contact to target uri element in dialog-info+xml body User who did this - Santiago Gimeno (sgimeno) ---------- There was a mistake in the patch. I attach the corrected one. ---------- One or more files have been attached. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=20#comment9 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

14 years, 4 months

[tracker] Task opened: Add contact to target uri element in dialog-info+xml body (Attachment added)

by sip-router

THIS IS AN AUTOMATED MESSAGE, DO NOT REPLY. A new Flyspray task has been opened. Details are below. User who did this - Santiago Gimeno (sgimeno) Attached to Project - sip-router Summary - Add contact to target uri element in dialog-info+xml body Task Type - Improvement Category - Module Status - Unconfirmed Assigned To - Operating System - All Severity - Low Priority - Normal Reported Version - Development Due in Version - Undecided Due Date - Undecided Details - This patch adds the local and remote contacts to the target uri elements in the dialog-info+xml body instead of the from and to uri. It's against kamailio-1.5.x One or more files have been attached. More information can be found at the following URL: http://sip-router.org/tracker/index.php?do=details&task_id=20 You are receiving this message because you have requested it from the Flyspray bugtracking system. If you did not expect this message or don't want to receive mails in future, you can change your notification settings at the URL shown above.

14 years, 4 months

[SR-Users] Upgrade Serweb from version 0.9.4 to version 2.0.1-dev1

by inge

Hi, I have to upgrade Serweb to the version 2.0.1-dev1 (that work with SER 2.0). Is it possible to use Serweb 0.9.4 (using PHP v.5.1.6) with SER 2.0 however the database "ser" has a new structure? Regards, David.

14 years, 4 months

SF.net SVN: openser:[5959]

by Carsten Bock

Revision: 5959 http://openser.svn.sourceforge.net/openser/?rev=5959&view=rev Author: carstenbock Date: 2009-12-16 16:40:00 +0000 (Wed, 16 Dec 2009) Log Message: ----------- We need to parse all headers in order to create a proper route-set. If just use "parse_headers(msg,HDR_RECORDROUTE_F,0)" it will only parse the first Record-Route header, but not all headers. Thank's to Torben Friese, BASIS AUDIONET, for pointing this out. Modified Paths: -------------- branches/1.4/modules/dialog/dlg_handlers.c branches/1.5/modules/dialog/dlg_handlers.c trunk/modules/dialog/dlg_handlers.c This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.

14 years, 4 months

git:kamailio_3.0: makefile: fix make bin & basedir

by Daniel-Constantin Mierla

Module: sip-router Branch: kamailio_3.0 Commit: 72ce05ee4fab38d7dd16934d93b5c05ed619b432 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=72ce05e… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Dec 15 00:58:14 2009 +0100 makefile: fix make bin & basedir - make bin and make sunpkg fixed (basedir was not an absolute path) - auto-transform basedir to an absolute path if it does not start with '/' - fix unexported makefile_defs, after loading the config in the main Makefile (cherry picked from commit 31442b832dd4fc606833a06fb92d90f62af9f1b0) --- Makefile | 16 ++++++++++++++-- 1 files changed, 14 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 16f3dbb..c274022 100644 --- a/Makefile +++ b/Makefile @@ -322,6 +322,7 @@ ifeq ($(makefile_defs),1) ifeq ($(quiet),verbose) $(info config.mak loaded) endif # verbose +export makefile_defs # config_make valid & used config_mak=1 ifeq ($(MAIN_NAME),) @@ -343,6 +344,7 @@ else # config.mak not strictly needed, but try to load it if exists for $(Q) config_mak=skip -include config.mak +export makefile_defs endif endif @@ -491,6 +493,15 @@ ifeq ($(config_mak),1) include Makefile.cfg +# fix basedir path (relative -> absolute) +ifneq (,$(basedir)) +ifeq (,$(filter /%, $(basedir))) +override basedir:=$(CURDIR)/$(basedir) +# remove basedir from command line overrides +MAKEOVERRIDES:=$(filter-out basedir=%,$ $(MAKEOVERRIDES)) +endif # (,$(filter /%, $(basedir))) +endif # (,$(basedir)) + else ifneq ($(config_mak),skip) config.mak: Makefile.defs @@ -783,7 +794,7 @@ tar: $(auto_gen_keep) .PHONY: bin bin: mkdir -p tmp/$(MAIN_NAME)/usr/local - $(MAKE) install basedir=tmp/$(MAIN_NAME) $(mk_params) + $(MAKE) install basedir=$(CURDIR)/tmp/$(MAIN_NAME) $(mk_params) $(TAR) -C tmp/$(MAIN_NAME)/ -zcf ../$(NAME)-$(RELEASE)_$(OS)_$(ARCH).tar.gz . rm -rf tmp/$(MAIN_NAME) @@ -805,7 +816,8 @@ deb: sunpkg: mkdir -p tmp/$(MAIN_NAME) mkdir -p tmp/$(MAIN_NAME)_sun_pkg - $(MAKE) install basedir=tmp/$(MAIN_NAME) prefix=/usr/local $(mk_params) + $(MAKE) install basedir=$(CURDIR)/tmp/$(MAIN_NAME) \ + prefix=/usr/local $(mk_params) (cd pkg/solaris; \ pkgmk -r ../../tmp/$(MAIN_NAME)/usr/local -o -d ../../tmp/$(MAIN_NAME)_sun_pkg/ -v "$(RELEASE)" ;\ cd ../..)

14 years, 4 months

git:kamailio_3.0: kactl: cisco_restart cmd update to latest t_uac_dlg

by Daniel-Constantin Mierla

Module: sip-router Branch: kamailio_3.0 Commit: 1203f6771a08e499ad0ef39d18f6096814db537a URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=1203f67… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Tue Dec 15 22:58:10 2009 +0100 kactl: cisco_restart cmd update to latest t_uac_dlg - reported by David at lublink.net --- utils/kamctl/kamctl | 7 ++----- 1 files changed, 2 insertions(+), 5 deletions(-) diff --git a/utils/kamctl/kamctl b/utils/kamctl/kamctl index cbbe72b..dbcf227 100755 --- a/utils/kamctl/kamctl +++ b/utils/kamctl/kamctl @@ -866,11 +866,8 @@ $AVP_USER_COLUMN='$OSERUSER' AND $AVP_DOMAIN_COLUMN='$OSERDOMAIN'" cisco_restart() { require_ctlengine myhost=`get_my_host` - RET=`$CTLCMD t_uac_dlg NOTIFY "$1" "." \ - "From: sip:daemon@$myhost" \ - "To: <$1>" "Event: check-sync" \ - "Contact: <sip:daemon@!!>" "." "." | - head -1 ` + CMD="t_uac_dlg NOTIFY $1 . . \"From:sip:daemon@$myhost\r\nTo:<$1>\r\nEvent:check-sync\r\nContact:sip:daemon@$myhost\r\n\"" + RET=`$CTLCMD $CMD | head -1` print_status $RET }

14 years, 4 months

git:sr_3.0: makefile: fix make bin & basedir

by Andrei Pelinescu-Onciul

Module: sip-router Branch: sr_3.0 Commit: 31442b832dd4fc606833a06fb92d90f62af9f1b0 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=31442b8… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Date: Tue Dec 15 00:58:14 2009 +0100 makefile: fix make bin & basedir - make bin and make sunpkg fixed (basedir was not an absolute path) - auto-transform basedir to an absolute path if it does not start with '/' - fix unexported makefile_defs, after loading the config in the main Makefile --- Makefile | 16 ++++++++++++++-- 1 files changed, 14 insertions(+), 2 deletions(-) diff --git a/Makefile b/Makefile index 601d215..e7bc7cb 100644 --- a/Makefile +++ b/Makefile @@ -257,6 +257,7 @@ ifeq ($(makefile_defs),1) ifeq ($(quiet),verbose) $(info config.mak loaded) endif # verbose +export makefile_defs # config_make valid & used config_mak=1 ifeq ($(MAIN_NAME),) @@ -278,6 +279,7 @@ else # config.mak not strictly needed, but try to load it if exists for $(Q) config_mak=skip -include config.mak +export makefile_defs endif endif @@ -426,6 +428,15 @@ ifeq ($(config_mak),1) include Makefile.cfg +# fix basedir path (relative -> absolute) +ifneq (,$(basedir)) +ifeq (,$(filter /%, $(basedir))) +override basedir:=$(CURDIR)/$(basedir) +# remove basedir from command line overrides +MAKEOVERRIDES:=$(filter-out basedir=%,$ $(MAKEOVERRIDES)) +endif # (,$(filter /%, $(basedir))) +endif # (,$(basedir)) + else ifneq ($(config_mak),skip) config.mak: Makefile.defs @@ -718,7 +729,7 @@ tar: $(auto_gen_keep) .PHONY: bin bin: mkdir -p tmp/$(MAIN_NAME)/usr/local - $(MAKE) install basedir=tmp/$(MAIN_NAME) $(mk_params) + $(MAKE) install basedir=$(CURDIR)/tmp/$(MAIN_NAME) $(mk_params) $(TAR) -C tmp/$(MAIN_NAME)/ -zcf ../$(NAME)-$(RELEASE)_$(OS)_$(ARCH).tar.gz . rm -rf tmp/$(MAIN_NAME) @@ -736,7 +747,8 @@ deb: sunpkg: mkdir -p tmp/$(MAIN_NAME) mkdir -p tmp/$(MAIN_NAME)_sun_pkg - $(MAKE) install basedir=tmp/$(MAIN_NAME) prefix=/usr/local $(mk_params) + $(MAKE) install basedir=$(CURDIR)/tmp/$(MAIN_NAME) \ + prefix=/usr/local $(mk_params) (cd pkg/solaris; \ pkgmk -r ../../tmp/$(MAIN_NAME)/usr/local -o -d ../../tmp/$(MAIN_NAME)_sun_pkg/ -v "$(RELEASE)" ;\ cd ../..)

14 years, 4 months

git:kamailio_3.0: nat_traversal: link with lib kcore

by Daniel-Constantin Mierla

Module: sip-router Branch: kamailio_3.0 Commit: 7c6600c007be55263b48ea1114cbecab86347076 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=7c6600c… Author: Daniel-Constantin Mierla <miconda(a)gmail.com> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Mon Dec 14 20:50:17 2009 +0100 nat_traversal: link with lib kcore - include lib/kcore/statistics.h - fix undefined symbol for register_module_stats - reported by Ricardo Martinez --- modules_k/nat_traversal/Makefile | 3 +++ modules_k/nat_traversal/nat_traversal.c | 1 + 2 files changed, 4 insertions(+), 0 deletions(-) diff --git a/modules_k/nat_traversal/Makefile b/modules_k/nat_traversal/Makefile index 932620a..8f21003 100644 --- a/modules_k/nat_traversal/Makefile +++ b/modules_k/nat_traversal/Makefile @@ -12,5 +12,8 @@ LIBS= DEFS+=-DOPENSER_MOD_INTERFACE +SERLIBPATH=../../lib +SER_LIBS+=$(SERLIBPATH)/kcore/kcore + include ../../Makefile.modules diff --git a/modules_k/nat_traversal/nat_traversal.c b/modules_k/nat_traversal/nat_traversal.c index 119c592..0a04f78 100644 --- a/modules_k/nat_traversal/nat_traversal.c +++ b/modules_k/nat_traversal/nat_traversal.c @@ -49,6 +49,7 @@ #include "../../parser/parse_uri.h" #include "../../parser/parse_expires.h" #include "../../parser/contact/parse_contact.h" +#include "../../lib/kcore/statistics.h" #include "../dialog/dlg_load.h" #include "../../modules/tm/tm_load.h" #include "../sl/sl_cb.h"

14 years, 5 months

git:kamailio_3.0: core: fix parsing for avps with the same name as a pv class

by Daniel-Constantin Mierla

Module: sip-router Branch: kamailio_3.0 Commit: a1b15f1289db84bdf8e3da11fa33af9ae0501f3c URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=a1b15f1… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Mon Dec 14 13:00:07 2009 +0100 core: fix parsing for avps with the same name as a pv class When a pv lookup fails, sometimes the pvspec is partially filled which, if not clean might mess-up the avp flags in the lval union. E.g.: $avp="..." caused problems (avp was marked as RE name). --- cfg.y | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/cfg.y b/cfg.y index 2c488a2..0062b0e 100644 --- a/cfg.y +++ b/cfg.y @@ -2435,6 +2435,10 @@ avp_pvar: AVP_OR_PVAR { s_tmp.s=$1; s_tmp.len=strlen(s_tmp.s); if (pv_parse_spec2(&s_tmp, &lval_tmp->lv.pvs, 1)==0){ /* not a pvar, try avps */ + /* lval_tmp might be partially filled by the failed + pv_parse_spec2() (especially if the avp name is the + same as a pv class) => clean it again */ + memset(lval_tmp, 0, sizeof(*lval_tmp)); lval_tmp->lv.avps.type|= AVP_NAME_STR; lval_tmp->lv.avps.name.s.s = s_tmp.s+1; lval_tmp->lv.avps.name.s.len = s_tmp.len-1;

14 years, 5 months

git:sr_3.0: core: fix parsing for avps with the same name as a pv class

by Andrei Pelinescu-Onciul

Module: sip-router Branch: sr_3.0 Commit: 9354d82c043b0fef64ad671505071ce64fc501b4 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=9354d82… Author: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Committer: Andrei Pelinescu-Onciul <andrei(a)iptel.org> Date: Mon Dec 14 13:00:07 2009 +0100 core: fix parsing for avps with the same name as a pv class When a pv lookup fails, sometimes the pvspec is partially filled which, if not clean might mess-up the avp flags in the lval union. E.g.: $avp="..." caused problems (avp was marked as RE name). --- cfg.y | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/cfg.y b/cfg.y index bfe45e4..234b2d0 100644 --- a/cfg.y +++ b/cfg.y @@ -2435,6 +2435,10 @@ avp_pvar: AVP_OR_PVAR { s_tmp.s=$1; s_tmp.len=strlen(s_tmp.s); if (pv_parse_spec2(&s_tmp, &lval_tmp->lv.pvs, 1)==0){ /* not a pvar, try avps */ + /* lval_tmp might be partially filled by the failed + pv_parse_spec2() (especially if the avp name is the + same as a pv class) => clean it again */ + memset(lval_tmp, 0, sizeof(*lval_tmp)); lval_tmp->lv.avps.type|= AVP_NAME_STR; lval_tmp->lv.avps.name.s.s = s_tmp.s+1; lval_tmp->lv.avps.name.s.len = s_tmp.len-1;

14 years, 5 months

← Newer
1
...
6
7
8
9
10
11
12
...
16
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

sr-dev December 2009