Hola, soy novata usando openser, y me cuesta mucho configurarlo.
Lo que trato de hacer es: consultar un fichero de texto para saber cúal es el estado de la red, y en función de lo que aparezca en ese fichero, enviar un mensaje de error para que no se establezca la comunicación, pero tengo problemas.
Para usar ficheros de texto necesito el módulo db_text y para consultarlo he usado el módulo avpops, pero no se utilizarlo y me da problemas.
El fichero que quiero leer es muy simple:
estado(int) 1
Y mi fichero de configuración es:
# # $Id: opensips.cfg 4423 2008-06-27 10:25:01Z henningw $ # # OpenSIPS basic configuration script # by Anca Vamanu anca@voice-system.ro # # Please refer to the Core CookBook at http://www.opensips.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. #
####### Global Parameters #########
debug=3 log_stderror=no log_facility=LOG_LOCAL0
fork=yes children=4
/* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes
/* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes
/* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no
/* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes
/* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no
/* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem"
port=5060
/* uncomment and configure the following line if you want opensips to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path mpath="/usr/local/lib/opensips/modules/"
/* uncomment next line for MySQL DB support */ #loadmodule "db_mysql.so" loadmodule "avpops.so" loadmodule "db_text.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "auth.so" #loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo")
# ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0)
# ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10)
# ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "")
# ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2)
# ----- usrloc params ----- modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ #modparam("usrloc", "db_mode", 2) #modparam("usrloc", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips")
modparam("avpops", "db_url", "db_text:///usr/local/share/opensips/dbtext/opensi$ modparam("avpops", "avp_table", "avptable") modparam("db_text", "db_mode", 1)
# ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_db", "password_column", "password") #modparam("auth_db", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("auth_db", "load_credentials", "")
# ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ #modparam("alias_db", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips")
# ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ #modparam("domain", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060")
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; }
#initial requests
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }
t_check_trans();
# authenticate if from local subscriber (uncomment to enable auth) ##if (!(method=="REGISTER") && from_uri==myself) ##{ ## if (!proxy_authorize("", "subscriber")) { ## proxy_challenge("", "0"); ## exit; ## } ## if (!check_from()) { ## sl_send_reply("403","Forbidden auth ID"); ## exit; ## } ## ## consume_credentials(); ## # caller authenticated ##}
# record routing if (!is_method("REGISTER|MESSAGE")) record_route();
# account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); }
# requests for my domain
/* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2);
if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; }
if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) ##if (!www_authorize("", "subscriber")) ##{ ## www_challenge("", "0"); ## exit; ##} ## ##if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##}
if (!save("location")) sl_reply_error();
exit; }
if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; }
# apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases");
if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } }
# when routing via usrloc, log the missed calls also setflag(2);
route(1); route(3); }
route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); }
if (!t_relay()) { sl_reply_error(); }; exit; }
route[3] { avp_db_query("SELECT estado FROM ejemplo", "$avp(s:estado)"); if (!avp_check("$avp(s:estado)","re/(0|1)/g")) { sl_send_reply("404", "Not Found"); exit; } else if ($avp(s:estado)=="0") { sl_send_reply("404", "Not found"); exit; } }
branch_route[2] { xlog("new branch at $ru\n"); }
onreply_route[2] { xlog("incoming reply\n"); }
failure_route[1] { if (t_was_cancelled()) { exit; }
}
Resalto en negrita lo que he modificado respecto al fichero original.
Y al arrancar openser obtengo en el fichero de log lo siguiente:
WARNING:core:fix_socket_list: could not rev. resolve 192.168.1.54 INFO:core:init_tcp: using epoll_lt as the TCP io watch method (auto detected) NOTICE:core:main: version: opensips 1.4.4-notls (i386/linux) INFO:core:main: using 32 Mb shared memory INFO:core:main: using 1 Mb private memory per process INFO:avpops:avpops_init: initializing... ERROR:core:db_check_api: module db_db_text does not export db_use_table function CRITICAL:avpops:avpops_db_bind: cannot bind to database module! Did you load a database module ? ERROR:core:init_mod: failed to initialize module avpops ERROR:core:main: error while initializing modules
Si alguien me puede ayudar se lo agradecería.
El Martes, 17 de Marzo de 2009, Laura10 escribió:
Openser no está preparado (ni debería) para ejecutar comandos de sistema (soporte mínimo) o para hacer cosas "raras" como leer ficheros custom. Es mejor que esta info la cargues en, por ejemplo, base de datos y que OpenSer la consulte en cada ocasión.
Si por la razón que sea, la información está en fichero de texto, seguro que es más fácil y viable hacer un script externo que lo parsee y lo meta en BD y una tarea de cron para la ejecución del script.
Otra idea es que dicho script externo tras parsear el fichero ejecute un comando MI de tal forma que dé valor a un DB o cambie alguna variable global en OpenSer, y que ésta sea consultada cada vez por OpenSer.
Para esto último revisa la documentación de todos los módulos, la sección "MI commands". Seguro que alguno te vale.
Saludos.
El error se debe a que el módulo db_text no tiene el parámetro db_url, y los datos no se extraen así. Como te ha dicho Iñaki lo mejor es que busques una manera más 'limpia' de hacerlo...
Hola, gracias por vuestras respuestas.
Mi objetivo es usar db_text para poder consultar ficheros de texto en lugar de usar bases de datos, pero si con avp_db_query no puedo consultar lo que hay en el fichero para indicarle que haga una cosa u otra, ¿cómo puedo hacerlo?. Sino, no entiendo para que se puede usar el db_text.
El día 18 de marzo de 2009 17:10, Laura10 leboillos@hotmail.com escribió:
Nunca he usado db_text, pero si no me equivoco es simplemente para usar un fichero de texto en vez de una BD de verdad. *NO* es para leer un fichero arbitrario. Es un fichero en el que Kamialio/OpenSIPS/OpenSer guarda el listado de usuarios, grupos y otras cosas que, por norma, general suele guardar en BD.
En definitiva, db_text NO proporciona lectura custom de un fichero custom. En serio, no pierdas el tiempo tratando de usar db_text para lo que no está diseñado.
Como te comentaba, busca otra forma de obtener esa información (te sugería un par de formas en otro correo).
Saludos.
sr-users-es@lists.kamailio.org