Hola, soy novata usando openser, y me cuesta mucho configurarlo. Lo que trato de hacer es: consultar un fichero de texto para saber cúal es el estado de la red, y en función de lo que aparezca en ese fichero, enviar un mensaje de error para que no se establezca la comunicación, pero tengo problemas. Para usar ficheros de texto necesito el módulo db_text y para consultarlo he usado el módulo avpops, pero no se utilizarlo y me da problemas. El fichero que quiero leer es muy simple: estado(int) 1 Y mi fichero de configuración es: # # $Id: opensips.cfg 4423 2008-06-27 10:25:01Z henningw $ # # OpenSIPS basic configuration script # by Anca Vamanu <anca(a)voice-system.ro> # # Please refer to the Core CookBook at http://www.opensips.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # ####### Global Parameters ######### debug=3 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to disable TCP (default on) */ #disable_tcp=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/opensips/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/opensips/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/opensips/tls/user/user-calist.pem" port=5060 /* uncomment and configure the following line if you want opensips to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:192.168.1.2:5060 ####### Modules Section ######## #set module path mpath="/usr/local/lib/opensips/modules/" /* uncomment next line for MySQL DB support */ #loadmodule "db_mysql.so" loadmodule "avpops.so" loadmodule "db_text.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "auth.so" #loadmodule "auth_db.so" /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/opensips_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "") # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ #modparam("usrloc", "db_mode", 2) #modparam("usrloc", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") modparam("avpops", "db_url", "db_text:///usr/local/share/opensips/dbtext/opensi$ modparam("avpops", "avp_table", "avptable") modparam("db_text", "db_mode", 1) # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_db", "password_column", "password") #modparam("auth_db", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("auth_db", "load_credentials", "") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ #modparam("alias_db", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ #modparam("domain", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://opensips:opensipsrw@localhost/opensips") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; } t_check_trans(); # authenticate if from local subscriber (uncomment to enable auth) ##if (!(method=="REGISTER") && from_uri==myself) ##{ ## if (!proxy_authorize("", "subscriber")) { ## proxy_challenge("", "0"); ## exit; ## } ## if (!check_from()) { ## sl_send_reply("403","Forbidden auth ID"); ## exit; ## } ## ## consume_credentials(); ## # caller authenticated ##} # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accounting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS ##if($rd=="tls_domain1.net") { ## t_relay("tls:domain1.net"); ## exit; ##} else if($rd=="tls_domain2.net") { ## t_relay("tls:domain2.net"); ## exit; ##} route(1); } # requests for my domain /* uncomment this if you want to enable presence server and comment the next 'if' block NOTE: uncomment also the definition of route[2] from below */ ##if( is_method("PUBLISH|SUBSCRIBE")) ## route(2); if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) ##if (!www_authorize("", "subscriber")) ##{ ## www_challenge("", "0"); ## exit; ##} ## ##if (!check_to()) ##{ ## sl_send_reply("403","Forbidden auth ID"); ## exit; ##} if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); if (!lookup("location")) { switch ($retcode) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } # when routing via usrloc, log the missed calls also setflag(2); route(1); route(3); } route[1] { # for INVITEs enable some additional helper routes if (is_method("INVITE")) { t_on_branch("2"); t_on_reply("2"); t_on_failure("1"); } if (!t_relay()) { sl_reply_error(); }; exit; } route[3] { avp_db_query("SELECT estado FROM ejemplo", "$avp(s:estado)"); if (!avp_check("$avp(s:estado)","re/(0|1)/g")) { sl_send_reply("404", "Not Found"); exit; } else if ($avp(s:estado)=="0") { sl_send_reply("404", "Not found"); exit; } } branch_route[2] { xlog("new branch at $ru\n"); } onreply_route[2] { xlog("incoming reply\n"); } failure_route[1] { if (t_was_cancelled()) { exit; } } Resalto en negrita lo que he modificado respecto al fichero original. Y al arrancar openser obtengo en el fichero de log lo siguiente: WARNING:core:fix_socket_list: could not rev. resolve 192.168.1.54 INFO:core:init_tcp: using epoll_lt as the TCP io watch method (auto detected) NOTICE:core:main: version: opensips 1.4.4-notls (i386/linux) INFO:core:main: using 32 Mb shared memory INFO:core:main: using 1 Mb private memory per process INFO:avpops:avpops_init: initializing... ERROR:core:db_check_api: module db_db_text does not export db_use_table function CRITICAL:avpops:avpops_db_bind: cannot bind to database module! Did you load a database module ? ERROR:core:init_mod: failed to initialize module avpops ERROR:core:main: error while initializing modules Si alguien me puede ayudar se lo agradecería. -- View this message in context: http://www.nabble.com/Consulta-un-fichero-con-openser-tp22563438p22563438.h… Sent from the OpenSER Users - ES mailing list archive at Nabble.com.