[SR-Users-ES] OpenSER + Voicemail (Asterisk)

Hola, La razón por la que escribo esta vez es para ver si me pueden ayudar adirigir llamas hacia un voicemail configurado en Asterisk. El escenario es el siguiente: hasta este punto tengo usuarios que se encuentran en LDAP, estos se autentican a través de un servidor Radius con OpenSER, una vez que tengo los usuarios en Openser estos pueden hacer llamadas SIP entre usuarios registrados asé como tambien realizar llamadas a la pstn utilizando para ello Asterisk como gateway, por otro lado los usuarios de OpenSER pueden consultar su buzón de voz al presionar *98, el buzón esta vacío porque no se como hacer que OpenSer redireccione la llamada a Asterisk en caso de que el cliente este ocupado o no disponible. Se que tengo que usar el failure_route pero no se como aplicarlo, Gracias en adelanto por la ayuda, Mario F. Mi openser.cfg es el siguiente: debug=3 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 listen=udp:192.168.1.11 alias="tesis.com" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/avpops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/uri.so" loadmodule "/usr/local/lib/openser/modules/acc.so" loadmodule "/usr/local/lib/openser/modules/auth_radius.so" loadmodule "/usr/local/lib/openser/modules/group_radius.so" loadmodule "/usr/local/lib/openser/modules/avp_radius.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/openser/modules/auth.so" #loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) ###############PARAMETROS RADIUS # -- acc params -- modparam("acc", "radius_flag", 1) modparam("acc", "radius_missed_flag", 2) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 1) modparam("auth_radius", "service_type", 15) modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("acc|auth_radius|group_radius|avp_radius", "radius_config", "/usr/local/etc/radiusclient-ng/radiusclient.conf") # -- group_radius params -- modparam("group_radius", "use_domain", 1) # -- avpops params -- modparam("avpops", "avp_aliases", "day=i:101;time=i:102") # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { append_hf("P-hint: rr-enforced\r\n"); if(is_method("BYE")) { # log it all the time acc_rad_request("200 ok"); acc_log_request("200 ok"); } route(1); }; if(is_method("INVITE") && !has_totag()) { # set the acc flags log(1,"-----> LLAMADA SIP <----- \n"); setflag(1); setflag(2); } if (uri==myself) { if (method=="REGISTER") { if (!radius_www_authorize("tesis.com")) { www_challenge("tesis.com", "0"); exit; }; save("location"); exit; }; if(uri=~"sip:\*98@.*") { #authorize if a call is going to PSTN xlog("L_INFO", "CALL: Call to check voicemail\n"); rewritehostport("192.168.1.10:5060"); }; if(uri=~"sip:041[2-6][0-9][0-9][0-9][0-9][0-9][0-9]+@") { #xlog("L_ERR", "LLAMANDO A PSTN\n"); # set gateway address "ASTERISK" log(1, "LLAMANDO A PSTN -----> Forwarding to Asterisk <----- \n"); rewritehostport("192.168.1.10:5060"); route(1); }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { acc_rad_request("404 Not Found"); acc_log_request("404 Not Found"); sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } Get news, entertainment and everything you care about at Live.com. Check it out! _________________________________________________________________ Connect to the next generation of MSN Messenger  http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&sou…