[SR-Users] How to configure ipv6 in kamailio

Henning Westerholt hw at skalatan.de
Sun Apr 28 10:18:23 CEST 2019


Hello,

the screenshots does not show any details about the REGISTER flow. Have a look to the actual network traffic from the client to the server to see what is happening (like is a message rejected etc..). Then report more details here on the list.

Cheers,

Henning

Am 26.04.19 um 13:47 schrieb Santosh Kumar Dash:
Thanks Daniel for your quick response.

I tried the above one which you mention above, I am sharing my screenshot which is showing it is listening on the given addresses but registration not happening, kindly saw the attached picture once.

Actually I need a basic call like below.

endopint-1                           kamailio              endpoint-2


REGISTER                   --------> |    <---------    REGISTER
REGISTER 200 OK      <-------  |    --------->    REGISTER 200 OK
INVITE                        ---------> |    --------->   INVITE
180 RINGING              <--------  |     <--------   180 RINGING
200 OK INVITE            <--------  |     <--------   200 OK INVITE
ACK                             ---------> |     --------->  ACK

                                -----------MEDIA-------------
BYE                                     ------------->            BYE
BYE 200 OK                        <------------             BYE 200 OK
REGISTER (exp=0)      --------> |    <---------    REGISTER
REGISTER 200 OK      <-------  |    --------->    REGISTER 200 OK

Thanks,

On Fri, 26 Apr 2019, 4:54 pm Daniel-Constantin Mierla, <miconda at gmail.com<mailto:miconda at gmail.com>> wrote:

Hello,

if you do not need anything special, just handling registrations over ipv6 and route between the users, then do:

listen=udp:[2402:3a80:d1a:f45a:fe44:2e54:ed2b:9bb2]:5060

A rather outdated tutorial, but still a good reading, is available at:

  * https://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6

See also the core cookbook on kamailio.org/wiki<http://kamailio.org/wiki>, there are couple of other parameters that you can tune.

Cheers,
Daniel

On 26.04.19 13:00, Santosh Kumar Dash wrote:
Hi All,
I have a kamailio installed in my setup which is working properly in IPV4 configuration.

I want to perform IPV6 configuration, I don't have any idea how to configure it,
I have tried few things by changing kamailio.cfg file but did not work.

I am sharing my kamailio.cfg file which is working fine in ipv4 Kindly help me to configure for IPV6.

lets say my Ipv6 address is : 2402:3a80:d1a:f45a:fe44:2e54:ed2b:9bb2

Thanks,



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com<http://www.kamailioworld.com>



_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users


--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://skalatan.de/services
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190428/8c7d9c12/attachment.html>


More information about the sr-users mailing list