[SR-Users] How to configure ipv6 in kamailio

[Santosh Kumar Dash]

Thanks Daniel for your quick response.

I tried the above one which you mention above, I am sharing my screenshot
which is showing it is listening on the given addresses but registration
not happening, kindly saw the attached picture once.

Actually I need a basic call like below.

endopint-1                           kamailio              endpoint-2


REGISTER                   --------> |    <---------    REGISTER
REGISTER 200 OK      <-------  |    --------->    REGISTER 200 OK
INVITE                        ---------> |    --------->   INVITE
180 RINGING              <--------  |     <--------   180 RINGING
200 OK INVITE            <--------  |     <--------   200 OK INVITE
ACK                             ---------> |     --------->  ACK

                                -----------MEDIA-------------
BYE                                     ------------->            BYE
BYE 200 OK                        <------------             BYE 200 OK
REGISTER (exp=0)      --------> |    <---------    REGISTER
REGISTER 200 OK      <-------  |    --------->    REGISTER 200 OK

Thanks,

On Fri, 26 Apr 2019, 4:54 pm Daniel-Constantin Mierla, <miconda at gmail.com>
wrote:

> Hello,
>
> if you do not need anything special, just handling registrations over ipv6
> and route between the users, then do:
>
> listen=udp:[2402:3a80:d1a:f45a:fe44:2e54:ed2b:9bb2]:5060
>
> A rather outdated tutorial, but still a good reading, is available at:
>
>   * https://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6
> See also the core cookbook on kamailio.org/wiki, there are couple of
> other parameters that you can tune.
>
> Cheers,
> Daniel
>
> On 26.04.19 13:00, Santosh Kumar Dash wrote:
>
> Hi All,
> I have a kamailio installed in my setup which is working properly in IPV4
> configuration.
>
> I want to perform IPV6 configuration, I don't have any idea how to
> configure it,
> I have tried few things by changing *kamailio.cfg* file but did not work.
>
> I am sharing my *kamailio.cfg *file which is working fine in ipv4 Kindly
> help me to configure for IPV6.
>
> lets say my Ipv6 address is : 2402:3a80:d1a:f45a:fe44:2e54:ed2b:9bb2
>
> Thanks,
>
> _______________________________________________
> Kamailio (SER) - Users Mailing Listsr-users at lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190426/fd893629/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2019-04-26 17-10-42.png
Type: image/png
Size: 192512 bytes
Desc: not available
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190426/fd893629/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Screenshot from 2019-04-26 17-10-50.png
Type: image/png
Size: 190221 bytes
Desc: not available
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190426/fd893629/attachment-0001.png>