[SR-Users] Fwd: How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF
Kamal Palei
palei.kamal at gmail.com
Mon Oct 27 13:12:58 CET 2014
Since pcscf.cfg does not have load modules syntax, routing logic, shall we
user Kamailio.cfg and just include pcscf.cfg at the top of kamailio.cfg
file.
Or just we will execute Kamailio as P-CSCF and use only pcscf.cfg as config
file.
Kindly somebody clarify.
Thanks
Kamal
---------- Forwarded message ----------
From: Kamal Palei <palei.kamal at gmail.com>
Date: Mon, Oct 27, 2014 at 5:09 PM
Subject: Re: [SR-Users] How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.sip-router.org>
Thanks a lot Muhammad Shahzad.
I hope you want me to do
ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg kamailio.cfg*
My understanding is that kamailio.cfg will just be a file pointing to
pcscf.cfg
So the configuration that Kamailio-PCSCF server will get is basically from
pcscf.cfg.
I checked pcscf.cfg file, and content is quite less (I have copy/pasted
here below).
There is no request/response routing logic etc in pcscf.cfg.
Is that fine or we are missing something.
Kindly clarify.
*pcscf.cfg content*
*# IP-Adress for incoming SIP-Traffic, in the following format:# SIP /
UDPlisten=udp:109.239.57.200:5060
<http://109.239.57.200:5060>listen=tcp:109.239.57.200:5060
<http://109.239.57.200:5060># SIP / TCP
(Monitoring)listen=tcp:127.0.0.1:5060 <http://127.0.0.1:5060># SIP /
TCP/TLS#listen=tls:109.239.57.200:5061 <http://109.239.57.200:5061># SIP /
Websocket#listen=tcp:109.239.57.200:80 <http://109.239.57.200:80># SIP /
Websocket/TLS#listen=tls:109.239.57.200:443
<http://109.239.57.200:443>alias=pcscf-1.imscore.org
<http://pcscf-1.imscore.org>alias=pcscf.imscore.org
<http://pcscf.imscore.org>alias=proxy.imscore.org
<http://proxy.imscore.org>#alias=tls:"wss-proxy.imscore.org
<http://wss-proxy.imscore.org>":443# Port, where we listen to
Traffic#!define PORT 5060#!subst "/NETWORKNAME/imscore.org/
<http://imscore.org/>"#!subst "/HOSTNAME/pcscf-1.imscore.org/
<http://pcscf-1.imscore.org/>"#!define HOSTNAME_IP pcscf-1.imscore.org
<http://pcscf-1.imscore.org>#!define HOSTNAME_ESC "pcscf-1\.imscore\.org"#
SIP-Address of capturing node, if not set, capturing is disabled.#!define
CAPTURE_NODE "sip:10.1.8.55"# Allowed IPs for XML-RPC-Queries#!define
XMLRPC_WHITELIST_1 "127.0.0.1"##!define XMLRPC_WHITELIST_2
"127.0.0.1"##!define XMLRPC_WHITELIST_3 "127.0.0.1"# Databases:#!define
DB_URL "mysql://pcscf:heslo@192.168.5.1/pcscf
<http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL
"con1=>mysql://pcscf:heslo@192.168.5.1/pcscf
<http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL2
"con2=>mysql://pcscf:heslo@10.1.27.217/pcscf
<http://pcscf:heslo@10.1.27.217/pcscf>"#! Optional: Server-URL for
Websocket-Requests##!define WEBSOCKET_WEBSERVER "phone.imscore.org
<http://phone.imscore.org>"# IP-Adress(es) of the RTP-Proxy##!define
RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222>
udp:10.1.27.217:22222 <http://10.1.27.217:22222>"#!define RTPPROXY_ADDRESS
"udp:10.1.2.186:22222 <http://10.1.2.186:22222>"## Several features can be
enabled using '#!define WITH_FEATURE' directives:## *** To run in debug
mode:# - define WITH_DEBUG## *** To enable nat traversal execute:#
- define WITH_NAT# - define the connection to the RTP-Proxy:
RTPPROXY_ADDRESS## *** To force alls calls through the RTP-Proxy# -
this will automagically enable NAT-Traversal# - define FORCE_RTPRELAY##
*** To enable IPv4/IPv6 Translation (RTPProxy)# - this will
automagically enable NAT-Traversal# - define WITH_RTPIPV4## *** To
enable TCP support execute:# - define WITH_TCP## *** To enable TLS
support execute:# - adjust CFGDIR/tls.cfg as needed# - define
WITH_TLS# - this will automagically enable TCP## *** To enable XMLRPC
support execute:# - define WITH_XMLRPC# - this will automagically
enable TCP## *** To enable anti-flood detection execute:# - adjust pike
and htable=>ipban settings as needed (default is# block if more than
16 requests in 2 seconds and ban for 300 seconds)# - define
WITH_ANTIFLOOD## *** To enable the Rx-Interface:# - Configure
Rx-Diameter-Interface in pcscf.xml# - define WITH_RX## *** To enable a
Homer SIP-Capter-Node:# - define CAPTURE_NODE with a proper address##
*** To enable support for the SEMS-SBC# - define WITH_SBC# -
configure dispatcher-list with a set of SBC's## *** To enable support for
Websocket# - define WITH_WEBSOCKET# - this will automagically
enable TCP## Enabled Features for this host:##!define WITH_DEBUG#!define
WITH_NAT#!define FORCE_RTPRELAY##!define WITH_TLS#!define
WITH_XMLRPC#!define WITH_ANTIFLOOD##!define WITH_RX##!define
WITH_TCP#!define WITH_SBC##!define WITH_WEBSOCKET#!define
WITH_IMS_HDR_CACHE#!define WITH_NATPING*
On Mon, Oct 27, 2014 at 4:58 PM, Muhammad Shahzad <shaheryarkh at gmail.com>
wrote:
> Kamailio reads only kamailio.cfg or any file included in kamailio.cfg. So
> you can either copy or link it as kamailio.cfg.
>
> cd /etc/kamailio
> rm kamailio.cfg
> ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/ kamailio.cfg*
>
> Thank you.
>
>
> On Mon, Oct 27, 2014 at 12:21 PM, Kamal Palei <palei.kamal at gmail.com>
> wrote:
>
>> Thanks Muhammad Shahzad,
>>
>> There is a step for P-CSCF install in above ng-voice site
>>
>> cd /etc/kamailio
>> mv kamailio.cfg kamailio.cfg.dist
>> ln -s pcscf.cfg kamailio.cfg
>>
>>
>> First here, we are moving kamailio.cfg to kamailio.cfg.dist
>>
>> Then we are executing
>>
>> ln -s pcscf.cfg kamailio.cfg
>>
>>
>> Here I believe pcscf.cfg is not existing in current path, but we are
>> trying to link.
>>
>> I am confused here.., kindly can you help me to understand.
>>
>>
>> I see one pcscf.cfg is there in path
>> */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg*
>>
>> Shall I copy that file and keep in /etc/kamailio path.
>>
>> And while executing PCSCF it needs both pcscf.cfg or kamailio.cfg,
>> something like kamailio.cfg includes pcscf.cfg.
>>
>> Can somebody pls clarify
>> 1. Do I need only kamailio.cfg
>> 2. Or both kamailio.cfg and pcscf.cfg
>> 3. Shall I copy pcscf.cfg from path
>> */usr/local/src/kamailio-4.2.0/examples/pcscf/ to /etc/kamailio path ?*
>>
>>
>> Thanks
>> kamal
>>
>>
>> On Mon, Oct 27, 2014 at 4:18 PM, Muhammad Shahzad <shaheryarkh at gmail.com>
>> wrote:
>>
>>> This is bit old, but should still work,
>>>
>>>
>>> http://nil.uniza.sk/ngnims/kamailio-ims/installing-base-kamailio-ims-platform-debian-squeeze-32bit
>>>
>>> Thank you.
>>>
>>>
>>>
>>> On Mon, Oct 27, 2014 at 11:08 AM, Kamal Palei <palei.kamal at gmail.com>
>>> wrote:
>>>
>>>> Hi All
>>>> Last few days we have tried to setup Kamailio for IMS server setup.
>>>> We have not been successful.
>>>>
>>>> Now we are planning to use Kamailio 4.2.0 code base (Latest) to setup
>>>> Kamailio IMS setup.
>>>>
>>>> I am looking for a link/document, that gives proper step by step
>>>> instructions how to setup Kamailio as IMS servers (P-CSCF, I-CSCF and
>>>> S-CSCF).
>>>>
>>>>
>>>> Can somebody kindly provide the official link or any other working
>>>> link, that I can follow to setup P-CSCF, I-CSCF ,S-CSCF and HSS.
>>>>
>>>> Thanks
>>>> kamal
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20141027/93613dcf/attachment.html>
More information about the sr-users
mailing list