[SR-Users] How to setup Kamailio as P-CSCF/S-CSCF/I-CSCF

Mon Oct 27 12:39:09 CET 2014

Thanks a lot Muhammad Shahzad.

I hope you want me to do

ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg kamailio.cfg*

My understanding is that kamailio.cfg will just be a file pointing to
pcscf.cfg

So the configuration that Kamailio-PCSCF server will get is basically from
pcscf.cfg.

I checked pcscf.cfg file, and content is quite less (I have copy/pasted
here below).

There is no request/response routing logic etc in pcscf.cfg.

Is that fine or we are missing something.

Kindly clarify.

*pcscf.cfg content*

*# IP-Adress for incoming SIP-Traffic, in the following format:# SIP /
UDPlisten=udp:109.239.57.200:5060
<http://109.239.57.200:5060>listen=tcp:109.239.57.200:5060
<http://109.239.57.200:5060># SIP / TCP
(Monitoring)listen=tcp:127.0.0.1:5060 <http://127.0.0.1:5060># SIP /
TCP/TLS#listen=tls:109.239.57.200:5061 <http://109.239.57.200:5061># SIP /
Websocket#listen=tcp:109.239.57.200:80 <http://109.239.57.200:80># SIP /
Websocket/TLS#listen=tls:109.239.57.200:443
<http://109.239.57.200:443>alias=pcscf-1.imscore.org
<http://pcscf-1.imscore.org>alias=pcscf.imscore.org
<http://pcscf.imscore.org>alias=proxy.imscore.org
<http://proxy.imscore.org>#alias=tls:"wss-proxy.imscore.org
<http://wss-proxy.imscore.org>":443# Port, where we listen to
Traffic#!define PORT 5060#!subst "/NETWORKNAME/imscore.org/
<http://imscore.org/>"#!subst "/HOSTNAME/pcscf-1.imscore.org/
<http://pcscf-1.imscore.org/>"#!define HOSTNAME_IP pcscf-1.imscore.org
<http://pcscf-1.imscore.org>#!define HOSTNAME_ESC "pcscf-1\.imscore\.org"#
SIP-Address of capturing node, if not set, capturing is disabled.#!define
CAPTURE_NODE "sip:10.1.8.55"# Allowed IPs for XML-RPC-Queries#!define
XMLRPC_WHITELIST_1 "127.0.0.1"##!define XMLRPC_WHITELIST_2
"127.0.0.1"##!define XMLRPC_WHITELIST_3 "127.0.0.1"# Databases:#!define
DB_URL "mysql://pcscf:heslo@192.168.5.1/pcscf
<http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL
"con1=>mysql://pcscf:heslo@192.168.5.1/pcscf
<http://pcscf:heslo@192.168.5.1/pcscf>"##!define DB_URL2
"con2=>mysql://pcscf:heslo@10.1.27.217/pcscf
<http://pcscf:heslo@10.1.27.217/pcscf>"#! Optional: Server-URL for
Websocket-Requests##!define WEBSOCKET_WEBSERVER "phone.imscore.org
<http://phone.imscore.org>"# IP-Adress(es) of the RTP-Proxy##!define
RTPPROXY_ADDRESS "udp:10.1.2.186:22222 <http://10.1.2.186:22222>
udp:10.1.27.217:22222 <http://10.1.27.217:22222>"#!define RTPPROXY_ADDRESS
"udp:10.1.2.186:22222 <http://10.1.2.186:22222>"## Several features can be
enabled using '#!define WITH_FEATURE' directives:## *** To run in debug
mode:#     - define WITH_DEBUG## *** To enable nat traversal execute:#
- define WITH_NAT#     - define the connection to the RTP-Proxy:
RTPPROXY_ADDRESS## *** To force alls calls through the RTP-Proxy#     -
this will automagically enable NAT-Traversal#     - define FORCE_RTPRELAY##
*** To enable IPv4/IPv6 Translation (RTPProxy)#     - this will
automagically enable NAT-Traversal#     - define WITH_RTPIPV4## *** To
enable TCP support execute:#     - define WITH_TCP## *** To enable TLS
support execute:#     - adjust CFGDIR/tls.cfg as needed#     - define
WITH_TLS#     - this will automagically enable TCP## *** To enable XMLRPC
support execute:#     - define WITH_XMLRPC#     - this will automagically
enable TCP## *** To enable anti-flood detection execute:#     - adjust pike
and htable=>ipban settings as needed (default is#       block if more than
16 requests in 2 seconds and ban for 300 seconds)#     - define
WITH_ANTIFLOOD## *** To enable the Rx-Interface:#     - Configure
Rx-Diameter-Interface in pcscf.xml#     - define WITH_RX## *** To enable a
Homer SIP-Capter-Node:#     - define CAPTURE_NODE with a proper address##
*** To enable support for the SEMS-SBC#     - define WITH_SBC#     -
configure dispatcher-list with a set of SBC's## *** To enable support for
Websocket#     - define WITH_WEBSOCKET#     - this will automagically
enable TCP## Enabled Features for this host:##!define WITH_DEBUG#!define
WITH_NAT#!define FORCE_RTPRELAY##!define WITH_TLS#!define
WITH_XMLRPC#!define WITH_ANTIFLOOD##!define WITH_RX##!define
WITH_TCP#!define WITH_SBC##!define WITH_WEBSOCKET#!define
WITH_IMS_HDR_CACHE#!define WITH_NATPING*

On Mon, Oct 27, 2014 at 4:58 PM, Muhammad Shahzad <shaheryarkh at gmail.com>
wrote:

> Kamailio reads only kamailio.cfg or any file included in kamailio.cfg. So
> you can either copy or link it as kamailio.cfg.
>
> cd /etc/kamailio
> rm kamailio.cfg
> ln -s */usr/local/src/kamailio-4.2.0/examples/pcscf/ kamailio.cfg*
>
> Thank you.
>
>
> On Mon, Oct 27, 2014 at 12:21 PM, Kamal Palei <palei.kamal at gmail.com>
> wrote:
>
>> Thanks Muhammad Shahzad,
>>
>> There is a step for P-CSCF install in above ng-voice site
>>
>> cd /etc/kamailio
>> mv kamailio.cfg kamailio.cfg.dist
>> ln -s pcscf.cfg kamailio.cfg
>>
>>
>> First here, we are moving kamailio.cfg to kamailio.cfg.dist
>>
>> Then we are executing
>>
>> ln -s pcscf.cfg kamailio.cfg
>>
>>
>> Here I believe pcscf.cfg is not existing in current path, but we are
>> trying to link.
>>
>> I am confused here.., kindly can you help me to understand.
>>
>>
>> I see one pcscf.cfg is there in path
>> */usr/local/src/kamailio-4.2.0/examples/pcscf/pcscf.cfg*
>>
>> Shall I copy that file and keep in /etc/kamailio path.
>>
>> And while executing PCSCF it needs both pcscf.cfg or kamailio.cfg,
>> something like kamailio.cfg includes pcscf.cfg.
>>
>> Can somebody pls clarify
>> 1. Do I need only kamailio.cfg
>> 2. Or both kamailio.cfg and pcscf.cfg
>> 3. Shall I copy pcscf.cfg from path
>> */usr/local/src/kamailio-4.2.0/examples/pcscf/ to /etc/kamailio path ?*
>>
>>
>> Thanks
>> kamal
>>
>>
>> On Mon, Oct 27, 2014 at 4:18 PM, Muhammad Shahzad <shaheryarkh at gmail.com>
>> wrote:
>>
>>> This is bit old, but should still work,
>>>
>>>
>>> http://nil.uniza.sk/ngnims/kamailio-ims/installing-base-kamailio-ims-platform-debian-squeeze-32bit
>>>
>>> Thank you.
>>>
>>>
>>>
>>> On Mon, Oct 27, 2014 at 11:08 AM, Kamal Palei <palei.kamal at gmail.com>
>>> wrote:
>>>
>>>> Hi All
>>>> Last few days we have tried to setup Kamailio for IMS server setup.
>>>> We have not been successful.
>>>>
>>>> Now we are planning to use Kamailio 4.2.0 code base (Latest) to setup
>>>> Kamailio IMS setup.
>>>>
>>>> I am looking for a link/document, that gives proper step by step
>>>> instructions how to setup Kamailio as IMS servers (P-CSCF, I-CSCF and
>>>> S-CSCF).
>>>>
>>>>
>>>> Can somebody kindly provide the official link or any other working
>>>> link, that I can follow to setup P-CSCF, I-CSCF ,S-CSCF and HSS.
>>>>
>>>> Thanks
>>>> kamal
>>>>
>>>> _______________________________________________
>>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>>> sr-users at lists.sip-router.org
>>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>>>
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20141027/44261de3/attachment.html>