[SR-Users] Call disconnects within 30 seconds

Rahul MathuR rahul.ultimate at gmail.com
Wed Aug 13 13:10:36 CEST 2014


Hello Davy,

I am attaching the abridged pcap file for the simplicity.
Please guide me how to resolve this issue.

Thanks again for your help !!




On Tue, Aug 12, 2014 at 1:42 PM, davy <davy.van.de.moere at gmail.com> wrote:

> If your Kamailio setup is close to vanilla, it should do it by default.
> But Kamailio is a very powerfull tool, it can easily be setup to stop
> passing over ACKs :)
>
> To attempt to answer what explicitly sends along the ACKs, that will most
> likely be the t_relay function, together with the logic which went before
> it…
>
> A good old tcpdump will most likely enlighten us.
>
> Op 12-aug.-2014, om 14:39 heeft Rahul MathuR <rahul.ultimate at gmail.com>
> het volgende geschreven:
>
> Hello Davy,
>
> Thanks for writing back..
>
> Tonight I'll take the tcpdump on Kamailio box and share the file.
>
> Please note that Kamailio and Freeswitch are both on public IP & at
> Freeswitch param, enable_timer=false is set.
>
> Is there any explicit way wherein ACKs can be transmitted to FS ?
>
>
> Thanks in advance !
>
>
> On Tue, Aug 12, 2014 at 1:15 PM, davy van de moere <
> davy.van.de.moere at gmail.com> wrote:
>
>> Are you sure you're getting the ACK correctly to FS?
>>
>> FS typically has this behavior when it did not correctly receive a
>> confirmation of an answer, and after 30 seconds disconnects, as for FS the
>> call has failed.
>>
>> Do you have a trace of the packets?
>>
>> grtz,
>> Davy Van De Moere
>>
>>
>> 2014-08-12 13:37 GMT+02:00 Rahul MathuR <rahul.ultimate at gmail.com>:
>>
>>> Hello,
>>>
>>> I have an iPhone/Android/Windows 8 based UAC, proxy server Kamailio and
>>> Sip server FreeSwitch.
>>> Whenever I call directly from UAC to Sip server, the call gets
>>> established for as long as I want, however when I use the proxy in between,
>>> it gets disconnected within 30 seconds. It seems that FS sends a BYE within
>>> 30 seconds.
>>>
>>> I would really appreciate if anybody please guide me where I am going
>>> wrong in this case ?
>>>
>>> --
>>> Warm Regds.
>>> MathuRahul
>>>
>>> _______________________________________________
>>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>>> sr-users at lists.sip-router.org
>>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>>
>>>
>>
>> _______________________________________________
>> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
>> sr-users at lists.sip-router.org
>> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>>
>>
>
>
> --
> Warm Regds.
> MathuRahul
>  _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>
>


-- 
Warm Regds.
MathuRahul
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140813/8e34d4fc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: call_disconnect_30_seconds.pcap
Type: application/octet-stream
Size: 45203 bytes
Desc: not available
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20140813/8e34d4fc/attachment.obj>


More information about the sr-users mailing list