[SR-Users] nathelpler module path support

[Ovidiu Sas]

Try the nat_traversal module:
http://www.kamailio.org/docs/modules/3.1.x/modules_k/nat_traversal.html
It should handle this kind of scenarios.


Regards,
Ovidiu Sas

On Fri, May 13, 2011 at 6:49 AM, Asgaroth <00asgaroth00 at gmail.com> wrote:
> Hi All,
>
> I have a scenario where our registrar's are sitting behind our sip
> proxy. The sip proxy is the only system that has access to the outside
> world. Our registrar's are all on internal private addresses.
>
> I am trying to configure our registrar's to perform nat pinging.
> However, because the registrar's are on an internal address there is
> no way for the nat ping to get out. I enabled the path option so that
> the registrar stores the path that the registration comes in on.
> However it doesnt seem like the nathelper module uses the path
> parameter to send the outgoing nat ping. I tried the nat ping using
> sip method INFO, but the same applies, it does not appear to be able
> to send out via the outbound proxy.
>
> I tried to enable the natping option on the sip proxy, but it appears
> that only registrations with a socket address of the local host will
> get pinged, or else it is ignored.
>
> Is there an option that I am missing for the nat helper module that
> will enable me to set an outbound proxy for the nat ping messages?
>
> Any insight would be appreciated.
>
> Thanks
>
> _______________________________________________
> SIP Express Router (SER) and Kamailio (OpenSER) - sr-users mailing list
> sr-users at lists.sip-router.org
> http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-users
>