[Kamailio-Users] room does not exists in IMC
Rajesh
Rajesh.sreedharan at siptech.com
Fri Sep 18 09:17:43 CEST 2009
Dear Schumann,
Your message was indeed very much helpful..I
am sure xlite send html messages and not plain text messages.So i
created imc_rooms and tried.. bit still i get the same error(iam pasting
the error messages below).I appreciate your responses.
*
ERROR:imc:imc_handle_message: user [11] has no rights to send messages
in room [q]!
ERROR:imc:imc_manager: failed to handle 'message'*
Thanks
Schumann Sebastian wrote:
> You should check if it sends plain text. Some clients send HTML
> formatted messages, so the module does not interpret your command as
> command, but normal "text" to the channel (that does indeed not exist
> then).
>
> If that does not work, try to create the room "manually" into the
> imc_rooms table *BEFORE* starting kamailio.
>
> Sebastian
>
> ------------------------------------------------------------------------
> *From:* users-bounces at lists.kamailio.org
> [mailto:users-bounces at lists.kamailio.org] *On Behalf Of *Rajesh
> *Sent:* Thursday, 17. September 2009 07:00
> *To:* users kamailio
> *Subject:* [Kamailio-Users] room does not exists in IMC
>
> Dear Experts,
> I have been trying to configure IMC for
> quite some time now..when ti try to create the chatroom (using my
> xlite phone), using the command #create q, i get the following error.
> *ERROR:imc:imc_handle_message: room [q] does not exist!
> Sep 17 10:25:36 [2562] ERROR:imc:imc_manager: failed to handle
> 'message'
> *
> Iam posting my cfg below.. Your sujjestion would be of immense
> help to me..
>
>
> #
> # $Id: kamailio.cfg 5881 2009-06-22 09:13:04Z henningw $
> #
> # Kamailio (OpenSER) SIP Server - basic configuration script
> # - web: http://www.kamailio.org
> # - svn: http://openser.svn.sourceforge.net/viewvc/openser/
> #
> # Direct your questions about this file to: <users at lists.kamailio.org>
>
>
> debug=3
> log_stderror=yes
> log_facility=LOG_LOCAL0
>
> fork=yes
> children=4
>
>
>
> port=5060
>
> /* uncomment and configure the following line if you want Kamailio to
> bind on a specific interface/port/proto (default bind on all
> available) */
> #listen=udp:192.168.1.2:5060
>
>
> ####### Modules Section ########
>
> #set module path
> mpath="/usr/local/lib/kamailio/modules/"
>
> /* uncomment next line for MySQL DB support */
> loadmodule "db_mysql.so"
> loadmodule "mi_fifo.so"
> loadmodule "sl.so"
> loadmodule "tm.so"
> loadmodule "rr.so"
> loadmodule "pv.so"
> loadmodule "maxfwd.so"
> loadmodule "usrloc.so"
> loadmodule "registrar.so"
> loadmodule "textops.so"
> loadmodule "uri_db.so"
> loadmodule "siputils.so"
> loadmodule "xlog.so"
> loadmodule "acc.so"
> loadmodule "imc.so"
>
>
> /* uncomment next lines for MySQL based authentication support
> NOTE: a DB (like db_mysql) module must be also loaded */
> loadmodule "auth.so"
> loadmodule "auth_db.so"
> /* uncomment next line for aliases support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #loadmodule "alias_db.so"
> /* uncomment next line for multi-domain support
> NOTE: a DB (like db_mysql) module must be also loaded
> NOTE: be sure and enable multi-domain support in all used modules
> (see "multi-module params" section ) */
> #loadmodule "domain.so"
> /* uncomment the next two lines for presence server support
> NOTE: a DB (like db_mysql) module must be also loaded */
> #p#loadmodule "presence.so"
> #p#loadmodule "presence_xml.so"
>
> #n#loadmodule "nathelper.so"
>
> # ----------------- setting module-specific parameters ---------------
>
>
> # ----- mi_fifo params -----
> modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
>
>
> # ----- rr params -----
> # add value to ;lr param to cope with most of the UAs
> modparam("rr", "enable_full_lr", 1)
> # do not append from tag to the RR (no need for this script)
> modparam("rr", "append_fromtag", 0)
>
>
> # ----- rr params -----
> modparam("registrar", "method_filtering", 1)
> /* uncomment the next line to disable parallel forking via location */
> # modparam("registrar", "append_branches", 0)
> /* uncomment the next line not to allow more than 10 contacts per
> AOR */
> #modparam("registrar", "max_contacts", 10)
>
>
> # ----- uri_db params -----
> /* by default we disable the DB support in the module as we do not
> need it
> in this configuration */
> modparam("uri_db", "use_uri_table", 0)
> modparam("uri_db", "db_url", "")
>
>
> # ----- acc params -----
> /* what sepcial events should be accounted ? */
> modparam("acc", "early_media", 1)
> modparam("acc", "report_ack", 1)
> modparam("acc", "report_cancels", 1)
> /* by default ww do not adjust the direct of the sequential requests.
> if you enable this parameter, be sure the enable "append_fromtag"
> in "rr" module */
> modparam("acc", "detect_direction", 0)
> /* account triggers (flags) */
> modparam("acc", "failed_transaction_flag", 3)
> modparam("acc", "log_flag", 1)
> modparam("acc", "log_missed_flag", 2)
> modparam("acc", "log_extra",
>
> "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
>
>
>
>
> # ----- auth_db params -----
> /* uncomment the following lines if you want to enable the DB based
> authentication */
> modparam("auth_db", "calculate_ha1", yes)
> modparam("auth_db", "password_column", "password")
> modparam("auth_db", "db_url",
> "mysql://openser:openserrw@localhost/openser")
> modparam("auth_db", "load_credentials", "")
>
>
>
> #-------tm params-----
> modparam("tm", "fr_timer", 10 )
> modparam("tm", "fr_inv_timer", 15 )
> modparam("tm", "wt_timer", 10 )
>
>
> #-------imc params-----
> modparam("imc", "db_url",
> "mysql://openser:openserrw@localhost/openser")
> modparam("imc", "hash_size", 8)
> modparam("imc", "imc_cmd_start_char", "#")
>
>
>
>
> #n#modparam("usrloc", "nat_bflag", 6)
>
> ####### Routing Logic ########
>
>
> # main request routing logic
>
> route{
>
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> exit;
> }
>
> # NAT detection
> route(4);
>
> if (has_totag()) {
> # sequential request withing a dialog should
> # take the path determined by record-routing
> if (loose_route()) {
> if (is_method("BYE")) {
> setflag(1); # do accounting ...
> setflag(3); # ... even if the transaction fails
> }
> route(1);
> } else {
> if (is_method("SUBSCRIBE") && uri == myself) {
> # in-dialog subscribe requests
> route(2);
> exit;
> }
> if ( is_method("ACK") ) {
> if ( t_check_trans() ) {
> # non loose-route, but stateful ACK; must be
> an ACK after a 487 or e.g. 404 from upstream server
> t_relay();
> exit;
> } else {
> # ACK without matching transaction ... ignore
> and discard.\n");
> exit;
> }
> }
> sl_send_reply("404","Not here");
> }
> exit;
> }
>
> #initial requests
>
> # CANCEL processing
> if (is_method("CANCEL"))
> {
> if (t_check_trans())
> t_relay();
> exit;
> }
>
> t_check_trans();
>
> # authentication
> route(3);
>
> # record routing
> if (!is_method("REGISTER|MESSAGE"))
> record_route();
>
> # account only INVITEs
> if (is_method("INVITE")) {
> setflag(1); # do accounting
> }
> if (!uri==myself)
> /* replace with following line if multi-domain support is used */
> ##if (!is_uri_host_local())
> {
> append_hf("P-hint: outbound\r\n");
> # if you have some interdomain connections via TLS
> ##if($rd=="tls_domain1.net") {
> ## t_relay("tls:domain1.net");
> ## exit;
> ##} else if($rd=="tls_domain2.net") {
> ## t_relay("tls:domain2.net");
> ## exit;
> ##}
> route(1);
> }
>
> # requests for my domain
>
> if( is_method("PUBLISH|SUBSCRIBE"))
> route(2);
>
> if (is_method("REGISTER"))
> {
> if (!save("location"))
> sl_reply_error();
>
> exit;
> }
>
>
>
> #if(uri=~"sip:q.*@")
> if(uri=~"sip:q at 192.168.64.75")
> {
> # IMC - message
> xdbg("script: message from [$fu] r-uri [$ru] msg
> [$rb]\n");
> if(is_method("MESSAGE"))
> {
> log("MESSAGE received -> processing with imc\n");
> sl_send_reply("200", "ok");
>
> imc_manager();
>
> exit;
> } else {
> sl_send_reply("404", "not found");
> exit;
> };
> } else {
> xdbg("script: message not for room, from [$fu] r-uri
> [$ru] msg [$rb]\n");
> if(!lookup("location"))
> {
> sl_send_reply("404", "not found");
> exit;
> }
> t_relay();
> #sl_send_reply("200", "ok");
> exit();
> };
>
>
>
> if ($rU==NULL) {
> # request with no Username in RURI
> sl_send_reply("484","Address Incomplete");
> exit;
> }
>
> # apply DB based aliases (uncomment to enable)
> ##alias_db_lookup("dbaliases");
>
> if (!lookup("location")) {
> switch ($retcode) {
> case -1:
> case -3:
> t_newtran();
> t_reply("404", "Not Found");
> exit;
> case -2:
> sl_send_reply("405", "Method Not Allowed");
> exit;
> }
> }
>
> # when routing via usrloc, log the missed calls also
> setflag(2);
>
> route(1);
> }
>
>
> route[1] {
>
>
> /* example how to enable some additional event routes */
> if (is_method("INVITE")) {
> #t_on_branch("1");
> t_on_reply("1");
> t_on_failure("1");
> }
>
> if (!t_relay()) {
> sl_reply_error();
> }
> exit;
> }
>
>
> # Presence route
> /* uncomment the whole following route for enabling presence server */
> route[2]
> {
>
>
> # if presence enabled, this part will not be executed
> if (is_method("PUBLISH") || $rU==null)
> {
> sl_send_reply("404", "Not here");
> exit;
> }
> return;
> }
>
> # Authentication route
> /* uncomment the whole following route for enabling authentication */
> route[3] {
> if (is_method("REGISTER"))
> {
> # authenticate the REGISTER requests (uncomment to enable
> auth)
> if (!www_authorize("", "subscriber"))
> {
> www_challenge("", "0");
> exit;
> }
>
> if ($au!=$tU)
> {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
> } else {
> # authenticate if from local subscriber (uncomment to
> enable auth)
> if (from_uri==myself)
> {
> if (!proxy_authorize("", "subscriber")) {
> proxy_challenge("", "0");
> exit;
> }
> if (is_method("PUBLISH"))
> {
> if ($au!=$tU) {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
> } else {
> if ($au!=$fU) {
> sl_send_reply("403","Forbidden auth ID");
> exit;
> }
> }
>
> consume_credentials();
> # caller authenticated
> }
> }
> return;
> }
>
> # Caller NAT detection route
> /* uncomment the whole following route for enabling Caller NAT
> Detection */
> route[4]{
>
> return;
> }
>
> # RTPProxy control
> /* uncomment the whole following route for enabling RTPProxy
> Control */
> route[5] {
>
> return;
> }
>
> branch_route[1] {
> xdbg("new branch at $ru\n");
> }
>
>
> onreply_route[1] {
> xdbg("incoming reply\n");
>
>
> }
>
>
> failure_route[1] {
>
>
> if (t_was_cancelled()) {
> exit;
> }
>
>
> }
>
>
> -
> Regards,
> Rajesh
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Kamailio (OpenSER) - Users mailing list
> Users at lists.kamailio.org
> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users
> http://lists.openser-project.org/cgi-bin/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20090918/fd8f55c5/attachment.htm>
More information about the sr-users
mailing list