[Kamailio-Users] room does not exists in IMC
Schumann Sebastian
Sebastian.Schumann at t-com.sk
Thu Sep 17 11:46:43 CEST 2009
You should check if it sends plain text. Some clients send HTML formatted messages, so the module does not interpret your command as command, but normal "text" to the channel (that does indeed not exist then).
If that does not work, try to create the room "manually" into the imc_rooms table *BEFORE* starting kamailio.
Sebastian
________________________________
From: users-bounces at lists.kamailio.org [mailto:users-bounces at lists.kamailio.org] On Behalf Of Rajesh
Sent: Thursday, 17. September 2009 07:00
To: users kamailio
Subject: [Kamailio-Users] room does not exists in IMC
Dear Experts,
I have been trying to configure IMC for quite some time now..when ti try to create the chatroom (using my xlite phone), using the command #create q, i get the following error.
ERROR:imc:imc_handle_message: room [q] does not exist!
Sep 17 10:25:36 [2562] ERROR:imc:imc_manager: failed to handle 'message'
Iam posting my cfg below.. Your sujjestion would be of immense help to me..
#
# $Id: kamailio.cfg 5881 2009-06-22 09:13:04Z henningw $
#
# Kamailio (OpenSER) SIP Server - basic configuration script
# - web: http://www.kamailio.org
# - svn: http://openser.svn.sourceforge.net/viewvc/openser/
#
# Direct your questions about this file to: <users at lists.kamailio.org><mailto:users at lists.kamailio.org>
debug=3
log_stderror=yes
log_facility=LOG_LOCAL0
fork=yes
children=4
port=5060
/* uncomment and configure the following line if you want Kamailio to
bind on a specific interface/port/proto (default bind on all available) */
#listen=udp:192.168.1.2:5060
####### Modules Section ########
#set module path
mpath="/usr/local/lib/kamailio/modules/"
/* uncomment next line for MySQL DB support */
loadmodule "db_mysql.so"
loadmodule "mi_fifo.so"
loadmodule "sl.so"
loadmodule "tm.so"
loadmodule "rr.so"
loadmodule "pv.so"
loadmodule "maxfwd.so"
loadmodule "usrloc.so"
loadmodule "registrar.so"
loadmodule "textops.so"
loadmodule "uri_db.so"
loadmodule "siputils.so"
loadmodule "xlog.so"
loadmodule "acc.so"
loadmodule "imc.so"
/* uncomment next lines for MySQL based authentication support
NOTE: a DB (like db_mysql) module must be also loaded */
loadmodule "auth.so"
loadmodule "auth_db.so"
/* uncomment next line for aliases support
NOTE: a DB (like db_mysql) module must be also loaded */
#loadmodule "alias_db.so"
/* uncomment next line for multi-domain support
NOTE: a DB (like db_mysql) module must be also loaded
NOTE: be sure and enable multi-domain support in all used modules
(see "multi-module params" section ) */
#loadmodule "domain.so"
/* uncomment the next two lines for presence server support
NOTE: a DB (like db_mysql) module must be also loaded */
#p#loadmodule "presence.so"
#p#loadmodule "presence_xml.so"
#n#loadmodule "nathelper.so"
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params -----
modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
# ----- rr params -----
# add value to ;lr param to cope with most of the UAs
modparam("rr", "enable_full_lr", 1)
# do not append from tag to the RR (no need for this script)
modparam("rr", "append_fromtag", 0)
# ----- rr params -----
modparam("registrar", "method_filtering", 1)
/* uncomment the next line to disable parallel forking via location */
# modparam("registrar", "append_branches", 0)
/* uncomment the next line not to allow more than 10 contacts per AOR */
#modparam("registrar", "max_contacts", 10)
# ----- uri_db params -----
/* by default we disable the DB support in the module as we do not need it
in this configuration */
modparam("uri_db", "use_uri_table", 0)
modparam("uri_db", "db_url", "")
# ----- acc params -----
/* what sepcial events should be accounted ? */
modparam("acc", "early_media", 1)
modparam("acc", "report_ack", 1)
modparam("acc", "report_cancels", 1)
/* by default ww do not adjust the direct of the sequential requests.
if you enable this parameter, be sure the enable "append_fromtag"
in "rr" module */
modparam("acc", "detect_direction", 0)
/* account triggers (flags) */
modparam("acc", "failed_transaction_flag", 3)
modparam("acc", "log_flag", 1)
modparam("acc", "log_missed_flag", 2)
modparam("acc", "log_extra",
"src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd")
# ----- auth_db params -----
/* uncomment the following lines if you want to enable the DB based
authentication */
modparam("auth_db", "calculate_ha1", yes)
modparam("auth_db", "password_column", "password")
modparam("auth_db", "db_url",
"mysql://openser:openserrw@localhost/openser")
modparam("auth_db", "load_credentials", "")
#-------tm params-----
modparam("tm", "fr_timer", 10 )
modparam("tm", "fr_inv_timer", 15 )
modparam("tm", "wt_timer", 10 )
#-------imc params-----
modparam("imc", "db_url", "mysql://openser:openserrw@localhost/openser")
modparam("imc", "hash_size", 8)
modparam("imc", "imc_cmd_start_char", "#")
#n#modparam("usrloc", "nat_bflag", 6)
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
exit;
}
# NAT detection
route(4);
if (has_totag()) {
# sequential request withing a dialog should
# take the path determined by record-routing
if (loose_route()) {
if (is_method("BYE")) {
setflag(1); # do accounting ...
setflag(3); # ... even if the transaction fails
}
route(1);
} else {
if (is_method("SUBSCRIBE") && uri == myself) {
# in-dialog subscribe requests
route(2);
exit;
}
if ( is_method("ACK") ) {
if ( t_check_trans() ) {
# non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server
t_relay();
exit;
} else {
# ACK without matching transaction ... ignore and discard.\n");
exit;
}
}
sl_send_reply("404","Not here");
}
exit;
}
#initial requests
# CANCEL processing
if (is_method("CANCEL"))
{
if (t_check_trans())
t_relay();
exit;
}
t_check_trans();
# authentication
route(3);
# record routing
if (!is_method("REGISTER|MESSAGE"))
record_route();
# account only INVITEs
if (is_method("INVITE")) {
setflag(1); # do accounting
}
if (!uri==myself)
/* replace with following line if multi-domain support is used */
##if (!is_uri_host_local())
{
append_hf("P-hint: outbound\r\n");
# if you have some interdomain connections via TLS
##if($rd=="tls_domain1.net") {
## t_relay("tls:domain1.net");
## exit;
##} else if($rd=="tls_domain2.net") {
## t_relay("tls:domain2.net");
## exit;
##}
route(1);
}
# requests for my domain
if( is_method("PUBLISH|SUBSCRIBE"))
route(2);
if (is_method("REGISTER"))
{
if (!save("location"))
sl_reply_error();
exit;
}
#if(uri=~"sip:q.*@"<sip:q.*@>)
if(uri=~"sip:q at 192.168.64.75"<sip:q at 192.168.64.75>)
{
# IMC - message
xdbg("script: message from [$fu] r-uri [$ru] msg [$rb]\n");
if(is_method("MESSAGE"))
{
log("MESSAGE received -> processing with imc\n");
sl_send_reply("200", "ok");
imc_manager();
exit;
} else {
sl_send_reply("404", "not found");
exit;
};
} else {
xdbg("script: message not for room, from [$fu] r-uri [$ru] msg [$rb]\n");
if(!lookup("location"))
{
sl_send_reply("404", "not found");
exit;
}
t_relay();
#sl_send_reply("200", "ok");
exit();
};
if ($rU==NULL) {
# request with no Username in RURI
sl_send_reply("484","Address Incomplete");
exit;
}
# apply DB based aliases (uncomment to enable)
##alias_db_lookup("dbaliases");
if (!lookup("location")) {
switch ($retcode) {
case -1:
case -3:
t_newtran();
t_reply("404", "Not Found");
exit;
case -2:
sl_send_reply("405", "Method Not Allowed");
exit;
}
}
# when routing via usrloc, log the missed calls also
setflag(2);
route(1);
}
route[1] {
/* example how to enable some additional event routes */
if (is_method("INVITE")) {
#t_on_branch("1");
t_on_reply("1");
t_on_failure("1");
}
if (!t_relay()) {
sl_reply_error();
}
exit;
}
# Presence route
/* uncomment the whole following route for enabling presence server */
route[2]
{
# if presence enabled, this part will not be executed
if (is_method("PUBLISH") || $rU==null)
{
sl_send_reply("404", "Not here");
exit;
}
return;
}
# Authentication route
/* uncomment the whole following route for enabling authentication */
route[3] {
if (is_method("REGISTER"))
{
# authenticate the REGISTER requests (uncomment to enable auth)
if (!www_authorize("", "subscriber"))
{
www_challenge("", "0");
exit;
}
if ($au!=$tU)
{
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
# authenticate if from local subscriber (uncomment to enable auth)
if (from_uri==myself)
{
if (!proxy_authorize("", "subscriber")) {
proxy_challenge("", "0");
exit;
}
if (is_method("PUBLISH"))
{
if ($au!=$tU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
} else {
if ($au!=$fU) {
sl_send_reply("403","Forbidden auth ID");
exit;
}
}
consume_credentials();
# caller authenticated
}
}
return;
}
# Caller NAT detection route
/* uncomment the whole following route for enabling Caller NAT Detection */
route[4]{
return;
}
# RTPProxy control
/* uncomment the whole following route for enabling RTPProxy Control */
route[5] {
return;
}
branch_route[1] {
xdbg("new branch at $ru\n");
}
onreply_route[1] {
xdbg("incoming reply\n");
}
failure_route[1] {
if (t_was_cancelled()) {
exit;
}
}
-
Regards,
Rajesh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.sip-router.org/pipermail/sr-users/attachments/20090917/5ccb931a/attachment.htm>
More information about the sr-users
mailing list