[Serusers] Re: Fw: [Users] TM : retransmission timers
Vaclav Kubart
vaclav.kubart at iptel.org
Fri Nov 24 16:06:39 CET 2006
I'm sorry to nip in, but I tried to rerun the tests again and add more
info into output as requested and add stable ser and CVS openser.
I know that this test doesn't conform much to real life (for example
generated callid/branch/tags differs only in a number, etc) but it can
give at least an image about simple stateful forward.
So, if anybody is interested:
http://www.iptel.org/~vku/performance/tm.serXopenser.correct/
I tried the same once more with less iterations because there were some
errors in log from openser speaking about low memory (I used -m to
specify shared mem size but with 768M it still said errors, might be a
memleak or did I anything wrong?). With 1M iterations it was without
errors:
http://www.iptel.org/~vku/performance/tm.serXopenser.1M/
Vaclav
P.S. I have forgotten - SIPP was "Sipp v1.1, version 20060829, built Sep
5 2006, 15:07:25", I'm attaching simple patch which I have used.
On Wed, Nov 22, 2006 at 12:48:12AM +0200, Daniel-Constantin Mierla wrote:
> I love such "independent" and "very very useful" tests ... one selected
> the versions he liked, latest development of ser with latest stable
> version of openser, the details about testing scenarios are pretty
> limited. However these details are very very insignificant, really.
>
> What matters is this particular case: what you tested is useless and
> someone can better implement a tiny kernel module to perform same job
> much faster that will make openser/ser trashed instantly if that is
> their only usage. More important are the performances in real world
> cases. I am not going to do comparison tests and reveal numbers, I will
> let you do and hope make the results available.
>
> I will exemplify with just two common use cases:
> A) ITSP where usrloc is required - to get the throughput from your tests
> one needs to have over million of online users. Let me know how SER is
> doing with loading them, I can bet that it takes several minutes to
> start (so service down for a significat time) and lot to lookup a record
> afterwards, do not forget to mention required memory. Then we will see
> if the forwarding throughput is the bottleneck.
> B) carrier - heavy accounting needed - take the latest cvs snapshots and
> test it, look at flexibility in same time and see if the balance of
> throughput and features is satisfactory. Do not forget that behind
> database should be redundant for a reliable accounting storage.
>
> My conclusion and the point I wanted to underline is that forwarding is
> not the bottleneck by far and so far in real-world deployments -- or at
> least nobody reported in openser mailing lists. Once it will be, for
> sure there will be effort and focus to optimize it. I don't even bother
> to check the scenarios, environment and test results you had, because
> makes no sense today.
>
> It is more important to look at the results gave, for example, here by
> an independent party:
> http://openser.org/pipermail/users/2006-November/007777.html
>
> With a real config and clustering system the performance of a box was
> 300calls per second -- having at least 5 database accesses!!!. If you
> need double you can add one more hardware, without extra configuration
> overhead, just plug and play. And that is stable version of OpenSER
> since July this year (btw, for those who keep saying that OpenSER does
> not focus on stability, just check the CVS and see the number of bugs
> encountered with this release, maybe you can change your opinion), and
> you can have a safe environment distributed geographically where each
> hardware can undertake the traffic from the others on the fly. With
> single box crashing because of different independent reasons (hardware
> failure, power outages ...) you get no service ... with three boxes you
> can serve huge number of active subscribers in peak hours and have
> failover support, so service availability 100%. I am sure most of the
> people look now how to build reliable platforms that scale very easy and
> can be distributed around the world, with a bunch of useful features --
> simple first line replacement is not the business case for VoIP anymore.
>
> We didn't try at OpenSER to get a airplane when we have to drive city
> streets, we looked to get feature rich and reliable application for its
> use cases. I would propose to have focus on making own applications
> better than trying to show the other one is worse.
>
> Cheers,
> Daniel
>
> PS. You can use stateless forwarding to get even better results, the
> usefulness will be the same.
>
> On 11/21/06 12:30, Jiri Kuthan wrote:
> >Regarding the technical discussion, here are some hard numbers which show
> >how SER stack outperforms derivative work. Forwarding throughput is clearly
> >several times better under stress and consequently, variation of response
> >delay is rather stable.
> >
> >
> >>http://www.iptel.org/~vku/performance/tm.serXopenser.pulpuk/
> >>
> >
> >
> >-jiri
> >
> >
> >At 21:16 09/11/2006, Rao Ramaratnamma wrote:
> >
> >>Hi Weiter,
> >>
> >>Yeah, I have been trying to limit myself to technical observations too,
> >>but the governance aspect is somewhat interesting too as a hint for
> >>future development, even though I guess even this is much more confusing
> >>than the technical ones. I have investigated, both projects have their
> >>firms with them that pursue their commercial interests which creates a
> >>risk of possibly departing from the public interest, like with redhat.
> >>From this angle they look quite similar. But if any worries me just a
> >>little bit more than openser. Appearance at commercial shows on the
> >>"open" side versus technical event on the "net" side if I take your BSD
> >>parallel, marketing "open" webpage accusing "net" version bad, hiding
> >>root commerical sponsors on the "open" webpage, this could be signs for a
> >>redhat-like doubleedged sword. Hopefully I am oversensing because I mean
> >>it is natural that everybody has SOME interest, but indisputably folks on
> >>both sides have done good work, but same indisputably more TRANSPARENCY
> >>would be helpful for both projects so that users can be less
> >>investigative.
> >>
> >>But I agree the technical comparison you suggest will be very useful if
> >>not most useful. This is what I am eventually upto. Anything folks have
> >>to tell in this topic is most welcome like the retransmission timers in
> >>subject or user loading.
> >>
> >>rr
> >>
> >>disconcerted by the fact that the more I know the more I am confused and
> >>determined to get over the learning curve quickly. also excuse the abuse
> >>I crossposted again but I think cross interrogation is a bit painful but
> >>the more effective :-)
> >>
> >>----- Original Message ----
> >>From: Weiter Leiter <bp4mls at googlemail.com>
> >>To: Kim Il <kim_il_s at yahoo.com>
> >>Cc: users at openser.org
> >>Sent: Thursday, November 9, 2006 1:42:29 PM
> >>Subject: Re: Fw: [Users] TM : retransmission timers
> >>
> >>Common user barely has time to meet his boss requirements, rather than
> >>playing around with different scenarios, platforms, environments.
> >>I only read one email where Daniel stated that OpenSER now performs a
> >>whole much better while loading users from database. SER guys put no
> >>figure out yet, neither bare numbers nor comparisons. I'm just really
> >>curious to see how both servers perform, that's all.
> >>Even though I must maintain my SER, I kinda like OpenSER's faster
> >>releases and developers' responsiveness (that I shamelessly exploit for
> >>the common code left there :-), which is pretty much nonexistent with
> >>iptel (at least this is the general belief here at OpenSER). But about
> >>this I'll probably have to fight on SER's mailing list. I still wish that
> >>one day I won't have to compare features; heck, NetSER and FreeSER are
> >>still available ;-).
> >>WL.
> >>
> >>PS. Maybe regretfully, I haven't seen any iptel booth at von this year,
> >>while OpenSER guys put up a nice show. My congrats.
> >>
> >>On 11/9/06, Kim Il <<mailto:kim_il_s at yahoo.com>kim_il_s at yahoo.com> wrote:
> >>I can see what you are hinting at, but I guess that the users are the
> >>unbiased party that should do the judgment and not the parties who have
> >>something to gain.
> >>cheers
> >>
> >>Weiter Leiter <<mailto:bp4mls at googlemail.com>bp4mls at googlemail.com>
> >>wrote: This features comparisons are not to last for too long, some
> >>performance comparisons would also be nice. After all, there are plenty
> >>of UA-level stacks out there. At least now that both projects get to have
> >>stable releases after forking and some core functionality remained
> >>shared. I wonder what "unbiased" organization will take up the challenge.
> >>:-)
> >>On 11/8/06, Kim Il <<mailto:kim_il_s at yahoo.com> kim_il_s at yahoo.com >
> >>wrote: Mike,
> >>this is a really good start and we should collect these things so as to
> >>help the community to take the right choice. I would also suggest that
> >>what ever ground breaking issues we list we stay at the functional level
> >>(I do not think anyone is helped by using a description containing
> >>"allowing carrier grade platforms" and similar marketing phrases). cheers
> >>
> >>
> >>{truncated because too large}
> >>
> >>
> >>
> >>
> >>Sponsored Link
> >>Talk more and pay less. Vonage can save you up to $300 a year on your
> >>phone bill.
> >><http://clk.atdmt.com/VON/go/yhxxxvon1080000017von/direct/01/>Sign up
> >>now.
> >>
> >>_______________________________________________
> >>Users mailing list
> >>Users at openser.org
> >><http://openser.org/cgi-bin/mailman/listinfo/users>http://openser.org/cgi-bin/mailman/listinfo/users
> >>
> >>
> >>_______________________________________________
> >>Serusers mailing list
> >>Serusers at lists.iptel.org
> >>http://lists.iptel.org/mailman/listinfo/serusers
> >>
> >
> >--
> >Jiri Kuthan http://iptel.org/~jiri/
> >
> >_______________________________________________
> >Serusers mailing list
> >Serusers at lists.iptel.org
> >http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>
> _______________________________________________
> Serusers mailing list
> Serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
-------------- next part --------------
Index: call.cpp
===================================================================
--- call.cpp (revision 32)
+++ call.cpp (working copy)
@@ -1812,6 +1812,8 @@
dest += sprintf(dest, "%s", (media_ip_is_ipv6 ? "6" : "4"));
} else if(!strcmp(keyword, "call_number")) {
dest += sprintf(dest, "%lu", number);
+ } else if(!strcmp(keyword, "call_number_6")) {
+ dest += sprintf(dest, "%06lu", number);
} else if(!strcmp(keyword, "call_id")) {
dest += sprintf(dest, "%s", id);
} else if(!strcmp(keyword, "cseq")) {
@@ -2246,6 +2248,19 @@
return;
}
+ /* quick hack for UAS and loose router - needed to use routes
+ * in the same order as Record-Routes */
+ if (bRequestIncoming) {
+ dialog_route_set = (char *)calloc(1, strlen(rr) + 2);
+ sprintf(dialog_route_set, "%s", rr);
+
+ if (strlen (contact)) {
+ strcpy (next_req_url, contact);
+ formatNextReqUrl (next_req_url);
+ }
+ return;
+ }
+
char actual_rr[MAX_HEADER_LEN];
char targetURI[MAX_HEADER_LEN];
memset(actual_rr, 0, sizeof(actual_rr));
More information about the sr-users
mailing list