RES: [Serusers] Cisco 3640 X SER X PSTN

[Jose Ricardo Maia Moraes]

Hi,

I use R2 Digital on all of my AS5300 connected to PABX Nortel, Lucent and
some carriers. Look the sample of my config:

controller E1 0
 framing NO-CRC4
 clock source line primary
 ds0-group 0 timeslots 1-15,17-31 type r2-digital r2-compelled ani
 cas-custom 0
  country brazil
  metering
  category 2
  answer-signal group-b 1
 
voice-port 0:0
 compand-type a-law
 cptone BR 

dial-peer voice 10 pots
 destination-pattern xxx
 direct-inward-dial
 port 0:0  

Good luck.

-----Mensagem original-----
De: serusers-bounces at iptel.org [mailto:serusers-bounces at lists.iptel.org] Em nome
de Welesley Sibelson Dias
Enviada em: quinta-feira, 19 de maio de 2005 06:33
Para: serusers at lists.iptel.org
Assunto: [Serusers] Cisco 3640 X SER X PSTN

Hi All
I have try connect one E1  using SER and CISCO 3640 but i have some problems

my PSTN Carrier Need Number for "A" but i don't send this , i  need to 
complete calls in my carrier.
Please have someone using cisco in R2 Digital send my one example of cfg .
thks a lot


_______________________________________________
Serusers mailing list
serusers at lists.iptel.org
http://lists.iptel.org/mailman/listinfo/serusers