[Serusers] SIP + RTPPROXY + NEED HELP

[harry gaillac]

I won't reduce it because of i try my best but Serweb
and ser don't work  even I spend time to read mailing
list, onsip.org,...

Even serweb from iptel.org is not useable !!!!!!
I'm not kidding just angry

Harry 

 --- "Greger V. Teigre" <greger at teigre.com> a écrit : 
> I recommend that you reduce your aggressiveness when
> posting to the mailing 
> list.  You efficiently make nobody want to help you.
> g-(
> 
> harry gaillac wrote:
> > Hello,
> >
> > I have the same troubles with ser+rtpproxy.
> > I think of you'll  waste time because of
> rtpproxy+ser
> > documention is bad.
> > I looked at www.onsip.org in order to find help
> about
> > NAT without success but you can waste time to send
> > help to serusers mailing list.
> >
> > We can read some nat troubles in mailing list
> every
> > week.
> >
> > I do hope you'll find help.
> >
> > Regards
> > Harry
> >
> > --- Iantcho Vassilev <ianchov at gbg.bg> a écrit :
> >> Hello, guys!
> >>
> >> Here is my situation:
> >>
> >> I have 2 ADSL at home:
> >>
> >> I have set up a linux(debian) SER +RTPPROXY on of
> >> the ADSL
> >> and i use the other Adsl for internet
> >> here:
> >> me ----> 192.168.0.xx(SER with two ethernet int)
> >>>
> >> 192.168.0.x(default gateway)
> >>>
> >> internet
> >>
> >> I`m using Xphone-Lite.
> >> I would like to contact another person registered
> on
> >> the outside interface of Ser(i`m registering from
> >> the interior).
> >> Internet IP <---> outside
> >> interface(SER)(lan)<---->me
> >> But that`s not working
> >> What`s should be the mistake(from sipsak i got:
> >> from the internet user: sipsak -s
> >> sip:adress_registered_from_lan at myADLShere
> >> returns my other ADSL line.
> >> and from sipsak -s
> >> sip:internet_number_user at myADSLhere i got
> >> sip:internet_number_user at HIS_IP_ADDRESS
> >>
> >>
> >> rttproxy is isntalled(build from cvs this
> morning)
> >>
> >> SER.cfg is
> >>
> >
>
:------------------->>>>>>>>><<<<<<<<<<<--------------------
> >>
> >> # ----------- global configuration parameters
> >> ------------------------
> >>
> >> debug=3         # debug level (cmd line:
> >> -dddddddddd)
> >> fork=yes
> >> log_stderror=no # (cmd line: -E)
> >>
> >> #/* Uncomment these lines to enter debugging mode
> >> #debug=7
> >> #Fork=no
> >> #log_stderror=yes
> >> #*/
> >>
> >> check_via=no    # (cmd. line: -v)
> >> dns=no           # (cmd. line: -r)
> >> rev_dns=no      # (cmd. line: -R)
> >> port=5060
> >> #Listen=83.228.8.112
> >> children=2
> >> fifo="/tmp/ser_fifo"
> >>
> >> # ------------------ module loading
> >> ----------------------------------
> >>
> >> # Uncomment this if you want to use SQL database
> >> #loadmodule "/usr/lib/ser/modules/mysql.so"
> >> loadmodule "/usr/lib/ser/modules/textops.so"
> >> loadmodule "/usr/lib/ser/modules/sl.so"
> >> loadmodule "/usr/lib/ser/modules/tm.so"
> >> loadmodule "/usr/lib/ser/modules/rr.so"
> >> loadmodule "/usr/lib/ser/modules/maxfwd.so"
> >> loadmodule "/usr/lib/ser/modules/usrloc.so"
> >> loadmodule "/usr/lib/ser/modules/registrar.so"
> >> loadmodule "/usr/lib/ser/modules/nathelper.so"
> >>
> >> #loadmodule "/usr/lib/ser/modules/domain.so"
> >> #loadmodule "/usr/lib/ser/modules/mediaproxy.so"
> >> # Uncomment this if you want digest
> authentication
> >> # mysql.so must be loaded !
> >> #loadmodule "/usr/lib/ser/modules/auth.so"
> >> #loadmodule "/usr/lib/ser/modules/auth_db.so"
> >>
> >> # ----------------- setting module-specific
> >> parameters ---------------
> >>
> >> # -- usrloc params --
> >>
> >> modparam("usrloc", "db_mode",   0)
> >> modparam("registrar", "nat_flag", 6)
> >> modparam("nathelper", "natping_interval", 60)
> >> modparam("nathelper", "ping_nated_only", 1)
> >> # Uncomment this if you want to use SQL database
> >> # for persistent storage and comment the previous
> >> line
> >> #modparam("usrloc", "db_mode", 2)
> >>
> >> # -- auth params --
> >> # Uncomment if you are using auth module
> >> #
> >> #modparam("auth_db", "calculate_ha1", yes)
> >> #
> >> # If you set "calculate_ha1" parameter to yes
> (which
> >> true in this config),
> >> # uncomment also the following parameter)
> >> #
> >> #modparam("auth_db", "password_column",
> "password")
> >>
> >> # -- rr params --
> >> # add value to ;lr param to make some broken UAs
> >> happy
> >> modparam("rr", "enable_full_lr", 1)
> >>
> >> # -------------------------  request routing
> logic
> >> -------------------
> >>
> >> # main routing logic
> >> route{
> >>
> >>         # initial sanity checks -- messages with
> >>         # max_forwards==0, or excessively long
> >> requests
> >>         if (!mf_process_maxfwd_header("10")) {
> >>                 sl_send_reply("483","Too Many
> >> Hops");
> >>                 break;
> >>         };
> >>         if (msg:len >=  max_len ) {
> >>                 sl_send_reply("513", "Message too
> >> big");
> >>                 break;
> >>         };
> >>
> >>         # !! Nathelper
> >>         # Special handling for NATed clients;
> first,
> >> NAT test is
> >>         # executed: it looks for via!=received
> and
> >> RFC1918 addresses
> >>         # in Contact (may fail if line-folding is
> >> used); also,
> >>         # the received test should, if completed,
> >> should check all
> >>         # vias for rpesence of received
> >>         if (nat_uac_test("3")) {
> >>                 # Allow RR-ed requests, as these
> may
> >> indicate that
> >>                 # a NAT-enabled proxy takes care
> of
> >> it; unless it is
> >>                 # a REGISTER
> >>
> >>                 if (method == "REGISTER" || !
> >> search("^Record-Route:")) {
> >>                     log("LOG: Someone trying to
> >> register from private IP, rewriting\n");
> >>
> >>                     # This will work only for
> user
> >> agents that support symmetric
> >>                     # communication. We tested
> quite
> >> many of them and majority is
> >>                     # smart enough to be
> symmetric.
> >> In some phones it takes a configuration
> >>                     # option. With Cisco 7960, it
> is
> 
=== message truncated === 


	

	
		
__________________________________________________________________
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/