[Serusers] SIP + RTPPROXY + NEED HELP
Klaus Darilion
klaus.mailinglists at pernau.at
Tue Apr 12 17:39:17 CEST 2005
You get what you pay for.
regards,
klaus
harry gaillac wrote:
> I won't reduce it because of i try my best but Serweb
> and ser don't work even I spend time to read mailing
> list, onsip.org,...
>
> Even serweb from iptel.org is not useable !!!!!!
> I'm not kidding just angry
>
> Harry
>
> --- "Greger V. Teigre" <greger at teigre.com> a écrit :
>
>>I recommend that you reduce your aggressiveness when
>>posting to the mailing
>>list. You efficiently make nobody want to help you.
>>g-(
>>
>>harry gaillac wrote:
>>
>>>Hello,
>>>
>>>I have the same troubles with ser+rtpproxy.
>>>I think of you'll waste time because of
>>
>>rtpproxy+ser
>>
>>>documention is bad.
>>>I looked at www.onsip.org in order to find help
>>
>>about
>>
>>>NAT without success but you can waste time to send
>>>help to serusers mailing list.
>>>
>>>We can read some nat troubles in mailing list
>>
>>every
>>
>>>week.
>>>
>>>I do hope you'll find help.
>>>
>>>Regards
>>>Harry
>>>
>>>--- Iantcho Vassilev <ianchov at gbg.bg> a écrit :
>>>
>>>>Hello, guys!
>>>>
>>>>Here is my situation:
>>>>
>>>>I have 2 ADSL at home:
>>>>
>>>>I have set up a linux(debian) SER +RTPPROXY on of
>>>>the ADSL
>>>>and i use the other Adsl for internet
>>>>here:
>>>>me ----> 192.168.0.xx(SER with two ethernet int)
>>>>
>>>>192.168.0.x(default gateway)
>>>>
>>>>internet
>>>>
>>>>I`m using Xphone-Lite.
>>>>I would like to contact another person registered
>>
>>on
>>
>>>>the outside interface of Ser(i`m registering from
>>>>the interior).
>>>>Internet IP <---> outside
>>>>interface(SER)(lan)<---->me
>>>>But that`s not working
>>>>What`s should be the mistake(from sipsak i got:
>>>>from the internet user: sipsak -s
>>>>sip:adress_registered_from_lan at myADLShere
>>>>returns my other ADSL line.
>>>>and from sipsak -s
>>>>sip:internet_number_user at myADSLhere i got
>>>>sip:internet_number_user at HIS_IP_ADDRESS
>>>>
>>>>
>>>>rttproxy is isntalled(build from cvs this
>>
>>morning)
>>
>>>>SER.cfg is
>>>>
>>>
> :------------------->>>>>>>>><<<<<<<<<<<--------------------
>
>>>># ----------- global configuration parameters
>>>>------------------------
>>>>
>>>>debug=3 # debug level (cmd line:
>>>>-dddddddddd)
>>>>fork=yes
>>>>log_stderror=no # (cmd line: -E)
>>>>
>>>>#/* Uncomment these lines to enter debugging mode
>>>>#debug=7
>>>>#Fork=no
>>>>#log_stderror=yes
>>>>#*/
>>>>
>>>>check_via=no # (cmd. line: -v)
>>>>dns=no # (cmd. line: -r)
>>>>rev_dns=no # (cmd. line: -R)
>>>>port=5060
>>>>#Listen=83.228.8.112
>>>>children=2
>>>>fifo="/tmp/ser_fifo"
>>>>
>>>># ------------------ module loading
>>>>----------------------------------
>>>>
>>>># Uncomment this if you want to use SQL database
>>>>#loadmodule "/usr/lib/ser/modules/mysql.so"
>>>>loadmodule "/usr/lib/ser/modules/textops.so"
>>>>loadmodule "/usr/lib/ser/modules/sl.so"
>>>>loadmodule "/usr/lib/ser/modules/tm.so"
>>>>loadmodule "/usr/lib/ser/modules/rr.so"
>>>>loadmodule "/usr/lib/ser/modules/maxfwd.so"
>>>>loadmodule "/usr/lib/ser/modules/usrloc.so"
>>>>loadmodule "/usr/lib/ser/modules/registrar.so"
>>>>loadmodule "/usr/lib/ser/modules/nathelper.so"
>>>>
>>>>#loadmodule "/usr/lib/ser/modules/domain.so"
>>>>#loadmodule "/usr/lib/ser/modules/mediaproxy.so"
>>>># Uncomment this if you want digest
>>
>>authentication
>>
>>>># mysql.so must be loaded !
>>>>#loadmodule "/usr/lib/ser/modules/auth.so"
>>>>#loadmodule "/usr/lib/ser/modules/auth_db.so"
>>>>
>>>># ----------------- setting module-specific
>>>>parameters ---------------
>>>>
>>>># -- usrloc params --
>>>>
>>>>modparam("usrloc", "db_mode", 0)
>>>>modparam("registrar", "nat_flag", 6)
>>>>modparam("nathelper", "natping_interval", 60)
>>>>modparam("nathelper", "ping_nated_only", 1)
>>>># Uncomment this if you want to use SQL database
>>>># for persistent storage and comment the previous
>>>>line
>>>>#modparam("usrloc", "db_mode", 2)
>>>>
>>>># -- auth params --
>>>># Uncomment if you are using auth module
>>>>#
>>>>#modparam("auth_db", "calculate_ha1", yes)
>>>>#
>>>># If you set "calculate_ha1" parameter to yes
>>
>>(which
>>
>>>>true in this config),
>>>># uncomment also the following parameter)
>>>>#
>>>>#modparam("auth_db", "password_column",
>>
>>"password")
>>
>>>># -- rr params --
>>>># add value to ;lr param to make some broken UAs
>>>>happy
>>>>modparam("rr", "enable_full_lr", 1)
>>>>
>>>># ------------------------- request routing
>>
>>logic
>>
>>>>-------------------
>>>>
>>>># main routing logic
>>>>route{
>>>>
>>>> # initial sanity checks -- messages with
>>>> # max_forwards==0, or excessively long
>>>>requests
>>>> if (!mf_process_maxfwd_header("10")) {
>>>> sl_send_reply("483","Too Many
>>>>Hops");
>>>> break;
>>>> };
>>>> if (msg:len >= max_len ) {
>>>> sl_send_reply("513", "Message too
>>>>big");
>>>> break;
>>>> };
>>>>
>>>> # !! Nathelper
>>>> # Special handling for NATed clients;
>>
>>first,
>>
>>>>NAT test is
>>>> # executed: it looks for via!=received
>>
>>and
>>
>>>>RFC1918 addresses
>>>> # in Contact (may fail if line-folding is
>>>>used); also,
>>>> # the received test should, if completed,
>>>>should check all
>>>> # vias for rpesence of received
>>>> if (nat_uac_test("3")) {
>>>> # Allow RR-ed requests, as these
>>
>>may
>>
>>>>indicate that
>>>> # a NAT-enabled proxy takes care
>>
>>of
>>
>>>>it; unless it is
>>>> # a REGISTER
>>>>
>>>> if (method == "REGISTER" || !
>>>>search("^Record-Route:")) {
>>>> log("LOG: Someone trying to
>>>>register from private IP, rewriting\n");
>>>>
>>>> # This will work only for
>>
>>user
>>
>>>>agents that support symmetric
>>>> # communication. We tested
>>
>>quite
>>
>>>>many of them and majority is
>>>> # smart enough to be
>>
>>symmetric.
>>
>>>>In some phones it takes a configuration
>>>> # option. With Cisco 7960, it
>>
>>is
>>
>
> === message truncated ===
>
>
>
>
>
>
> __________________________________________________________________
> Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails !
> Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
>
>
More information about the sr-users
mailing list