[Serusers] newbie -Problem wtih authentication error "401 unathorised (binding 0)"

[Mohamed Omar]

Hi

I have beed trying to setup SER for the last two weeks
but with little success. My end devices can register
with SER with the Default config but if I enable
disgest authentication.  The end devices can not
register and I get "401 unathorised (binding 0)"

I created two user accout  using "serctl add username
password " and it says the user was added successful.

below is my ser.cfg file.

Yoru help is really appreciated.  Thanks in advance

Mohamed omar
 #
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei
Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters
------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no	# (cmd line: -E)
alias=sipproxy.amatek.net
alias=192.168.77.151
alias=amatek.net

/* Uncomment these lines to enter debugging mode 
debug=7
fork=no
log_stderror=yes
*/

check_via=no	# (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading
----------------------------------

# Uncomment this if you want to use SQL database
loadmodule "/usr/lib/ser/modules/mysql.so"

loadmodule "/usr/lib/ser/modules/sl.so"
loadmodule "/usr/lib/ser/modules/tm.so"
loadmodule "/usr/lib/ser/modules/rr.so"
loadmodule "/usr/lib/ser/modules/maxfwd.so"
loadmodule "/usr/lib/ser/modules/usrloc.so"
loadmodule "/usr/lib/ser/modules/registrar.so"

# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "/usr/lib/ser/modules/auth.so"
loadmodule "/usr/lib/ser/modules/auth_db.so"

# ----------------- setting module-specific parameters
---------------

# -- usrloc params --

#modparam("usrloc", "db_mode",   0)

# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
modparam("usrloc", "db_mode", 2)

# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which
true in this config), 
# uncomment also the following parameter)
#
modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)

# -------------------------  request routing logic
-------------------

# main routing logic

route{

	# initial sanity checks -- messages with
	# max_forwards==0, or excessively long requests
	if (!mf_process_maxfwd_header("10")) {
		sl_send_reply("483","Too Many Hops");
		break;
	};
	if ( msg:len > max_len ) {
		sl_send_reply("513", "Message too big");
		break;
	};

	# we record-route all messages -- to make sure that
	# subsequent messages will go through our proxy;
that's
	# particularly good if upstream and downstream
entities
	# use different transport protocol
	record_route();	
	# loose-route processing
	if (loose_route()) {
		t_relay();
		break;
	};

	# if the request is for other domain use UsrLoc
	# (in case, it does not work, use the following
command
	# with proper names and addresses in it)
	if (uri==myself) {

		if (method=="REGISTER") {

# Uncomment this if you want to use digest
authentication
			if (!www_authorize("sipproxy.amatek.net",
"subscriber")) {
				www_challenge("sipproxy.ametek.net", "0");
				break;
			};

			save("location");
			break;
		};

		# native SIP destinations are handled using our
USRLOC DB
		if (!lookup("location")) {
			sl_send_reply("404", "Not Found");
			break;
		};
	};
	# forward to current uri now; use stateful
forwarding; that
	# works reliably even if we forward from TCP to UDP
	if (!t_relay()) {
		sl_reply_error();
	};

}



______________________________________________________________________ 
Post your free ad now! http://personals.yahoo.ca