[Serusers] Different RTP Server...HELP

[Shirley Toh]

Hi Marian, 

Thank you for your reply.
I am using the nathelper+RTPproxy, the PSTN gateway i am forward is using
another IP address for the media(rtp).
I have tried in rtpproxy -2fv -l address1/address2, t_relay_to_udp(RTP
Address) also is not working. Any suggestions. Thanks.

Regards,
Shirley

> -----Original Message-----
> From:	Marian Dumitru [SMTP:marian.dumitru at voice-sistem.ro]
> Sent:	Tuesday, November 16, 2004 4:20 PM
> To:	Shirley Toh
> Cc:	Serusers (E-mail)
> Subject:	Re: [Serusers] Different RTP Server...HELP
> 
> Hi Shirley,
> 
> This kind of changes have no kind of effect on SER - SER does nor handle 
> the media part(excepting when you use nathelper+RTPproxy). So, I think 
> the problem is not SER related. Probably you should do some network 
> dumps of the signalling messages and check if the IP addresses in SDP 
> part are correct.
> 
> Best regards,
> Marian
> 
> Shirley Toh wrote:
> > Hi,
> > 
> > I have problem, my PSTN gateway is using different IP addresses for IP
> > signalling and Media(RTP) signalling.
> > When we make calls, the phone rings and calls is connected but no audio.
> > Please advice what can be done. Thanks.
> > 
> > regards,
> > shir
> > 
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> 
> 
> -- 
> Voice Sistem
> http://www.voice-sistem.ro