[Serusers] Radius Accounting - HowTo !
Rafael J. Risco G.V.
rrisco at millicom.net.pe
Mon Jun 7 20:14:35 CEST 2004
hello
I´m still having problems with radius accounting module, ...I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug , please can someone share an example of its ser.cfg file for this function?
thanks
Rafael
PS: my current ser.cfg configuration is shown below, freeradius it´s installed
in the same host (SuSe Linux 9.0) and I have included setflag(1) for all transactions as Klaus D. recommend me some days ago...
ser:/var/log/radius/radacct# more /etc/ser/ser.cfg
# simple quick-start config script
#
# ----------- global configuration parameters ------------------------
#debug=3 # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no # (cmd line: -E)
#/* Uncomment these lines to enter debugging mode
debug=9
fork=yes
log_stderror=yes
#*/
check_via=no # (cmd. line: -v)
dns=no # (cmd. line: -r)
rev_dns=no # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"
# ------------------ module loading ----------------------------------
# Uncomment this if you want to use SQL database
#loadmodule "//lib/ser/modules/mysql.so"
loadmodule "//lib/ser/modules/sl.so"
loadmodule "//lib/ser/modules/tm.so"
loadmodule "//lib/ser/modules/rr.so"
loadmodule "//lib/ser/modules/maxfwd.so"
loadmodule "//lib/ser/modules/usrloc.so"
loadmodule "//lib/ser/modules/registrar.so"
loadmodule "//lib/ser/modules/group_radius.so"
#loadmodule "//lib/ser/modules/group.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !
loadmodule "//lib/ser/modules/auth.so"
#loadmodule "//lib/ser/modules/auth_db.so"
loadmodule "//lib/ser/modules/auth_radius.so"
loadmodule "//lib/ser/modules/acc.so"
#loadmodule "//lib/ser/modules/uri.so"
# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode", 0)
# Uncomment this if you want to use SQL database
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config),
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")
# -- rr params --
# add value to ;lr param to make some broken UAs happy
modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15)
modparam("acc", "log_level", 1)
modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf")
modparam("acc", "service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)
# ------------------------- request routing logic -------------------
# main routing logic
route{
setflag(1);
if (method=="REGISTER")
log(1, "REGISTER message received\n");
if (method=="INVITE")
log(1, "INVITE message received\n");
if (method=="ACK")
log(1, "ACK message received\n");
if (method=="BYE")
log(1, "BYE message received\n");
if (method=="CANCEL")
log(1, "CANCEL message received\n");
if (method=="SUBSCRIBE")
log(1, "SUBSCRIBE message received\n");
if (method=="NOTIFY")
log(1, "NOTIFY message received\n");
if (method=="OPTIONS")
log(1, "OPTIONS message received\n");
if (method=="INFO")
log(1, "INFO message received\n");
if (method=="MESSAGE")
log(1, "MESSAGE message received\n");
if (method=="REFER")
log(1, "REFER message received\n");
# initial sanity checks -- messages with
# max_forwards==0, or excessively long requests
if (!mf_process_maxfwd_header("10")) {
sl_send_reply("483","Too Many Hops");
break;
};
if ( msg:len > max_len ) {
sl_send_reply("513", "Message too big");
break;
};
# we record-route all messages -- to make sure that
# subsequent messages will go through our proxy; that's
# particularly good if upstream and downstream entities
# use different transport protocol
record_route();
# loose-route processing
if (loose_route()) {
t_relay();
break;
};
# if the request is for other domain use UsrLoc
# (in case, it does not work, use the following command
# with proper names and addresses in it)
if (uri==myself) {
if (method=="REGISTER") {
# Uncomment this if you want to use digest authentication
if (!radius_www_authorize("")) {
www_challenge("", "1");
break;
};
save("location");
break;
};
#Labeled transactions for accounting
#if (method =="INVITE" | method == "BYE")
# {
# log(1,"INVITE or BYE\n");
# setflag(1);
# };
#if (method=="MESSAGE") {
# log(1,"MESSAGE\n");
# setflag(1);
# };
#if (method=="BYE"){
# log (1, "BYEd or CANCEL\n");
# setflag(1);
# };
#if (method=="CANCEL"){
# log (1, "BYEe or CANCEL\n");
# setflag(1);
# };
# native SIP destinations are handled using our USRLOC DB
if (!lookup("location")) {
sl_send_reply("404", "Not Found");
break;
};
};
# forward to current uri now; use stateful forwarding; that
# works reliably even if we forward from TCP to UDP
if (!t_relay()) {
sl_reply_error();
};
}
ser:/var/log/radius/radacct #
[Serusers] Still trying to get radius Accounting!!!!!!!!!!
Klaus Darilion <klaus.mailinglists at pernau.at> escribió:
> try setflag(1); for the transactions you want to account!
>
> klaus
>
> Rafael J. Risco G.V. wrote:
>
> > hello serusers!
> > I have followed these instructions carefully
> again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can
> see that authentication process works well but I did not see any
> "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X
> debug, please can someone send me an example of ser.cfg configuration
> for this purpose?
> >
> > thanks
> > Rafael
> >
> > PS: my current ser.cfg configuration is shown below, freeradius it is
> installed in the same host (SuSe Linux 9.0):
> >
> > ser:/var/log/radius/radacct # more /etc/ser/ser.cfg
> > #
> > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > #
> > # simple quick-start config script
> > #
> >
> > # ----------- global configuration parameters
> ------------------------
> >
> > #debug=3 # debug level (cmd line: -dddddddddd)
> > #fork=yes
> > #log_stderror=no # (cmd line: -E)
> >
> > #/* Uncomment these lines to enter debugging mode
> > debug=9
> > fork=yes
> > log_stderror=yes
> > #*/
> >
> > check_via=no # (cmd. line: -v)
> > dns=no # (cmd. line: -r)
> > rev_dns=no # (cmd. line: -R)
> > #port=5060
> > #children=4
> > fifo="/tmp/ser_fifo"
> >
> > # ------------------ module loading
> ----------------------------------
> >
> > # Uncomment this if you want to use SQL database
> > #loadmodule "//lib/ser/modules/mysql.so"
> >
> > loadmodule "//lib/ser/modules/sl.so"
> > loadmodule "//lib/ser/modules/tm.so"
> > loadmodule "//lib/ser/modules/rr.so"
> > loadmodule "//lib/ser/modules/maxfwd.so"
> > loadmodule "//lib/ser/modules/usrloc.so"
> > loadmodule "//lib/ser/modules/registrar.so"
> > loadmodule "//lib/ser/modules/group_radius.so"
> >
> > #loadmodule "//lib/ser/modules/group.so"
> > # Uncomment this if you want digest authentication
> > # mysql.so must be loaded !
> >
> > loadmodule "//lib/ser/modules/auth.so"
> >
> > #loadmodule "//lib/ser/modules/auth_db.so"
> >
> > loadmodule "//lib/ser/modules/auth_radius.so"
> > loadmodule "//lib/ser/modules/acc.so"
> >
> > #loadmodule "//lib/ser/modules/uri.so"
> >
> > # ----------------- setting module-specific parameters
> ---------------
> > # -- usrloc params --
> > #modparam("usrloc", "db_mode", 0)
> > # Uncomment this if you want to use SQL database
> > # for persistent storage and comment the previous line
> > #modparam("usrloc", "db_mode", 2)
> > # -- auth params --
> > # Uncomment if you are using auth module
> > #
> > #modparam("auth_db", "calculate_ha1", yes)
> > #
> > # If you set "calculate_ha1" parameter to yes (which true in this
> config),
> > # uncomment also the following parameter)
> > #
> > #modparam("auth_db", "password_column", "password")
> >
> > # -- rr params --
> > # add value to ;lr param to make some broken UAs happy
> >
> > modparam("rr", "enable_full_lr", 1)
> >
> modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
> > modparam("auth_radius","service_type",15)
> > modparam("acc",
> "radius_config","/etc/radiusclient/radiusclient.conf")
> > modparam("acc", "service_type", 15)
> > modparam("acc", "radius_flag", 1)
> > modparam("acc", "radius_missed_flag", 3)
> >
> >
> >
> > # ------------------------- request routing logic
> -------------------
> >
> > # main routing logic
> >
> > route{
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if ( msg:len > max_len ) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (uri==myself) {
> >
> > if (method=="REGISTER") {
> >
> > # Uncomment this if you want to use digest authentication
> > if (!radius_www_authorize("")) {
> > www_challenge("", "0");
> > break;
> > };
> >
> > save("location");
> > break;
> > };
> >
> > # native SIP destinations are handled using our USRLOC
> DB
> > if (!lookup("location")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > };
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> > }
> > ser:/var/log/radius/radacct #
> >
> >
> > _______________________________________________
> > Serusers mailing list
> > serusers at lists.iptel.org
> > http://lists.iptel.org/mailman/listinfo/serusers
> >
> >
>
More information about the sr-users
mailing list