[Serusers] Radius Accounting - HowTo !
Jan Janak
jan at iptel.org
Tue Jun 8 11:50:13 CEST 2004
Are there any error messages in ser logs ?
Jan.
On 07-06 13:14, Rafael J. Risco G.V. wrote:
> hello
>
> I?m still having problems with radius accounting module, ...I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug , please can someone share an example of its ser.cfg file for this function?
>
> thanks
> Rafael
>
> PS: my current ser.cfg configuration is shown below, freeradius it?s installed
> in the same host (SuSe Linux 9.0) and I have included setflag(1) for all transactions as Klaus D. recommend me some days ago...
>
>
> ser:/var/log/radius/radacct# more /etc/ser/ser.cfg
>
> # simple quick-start config script
> #
>
> # ----------- global configuration parameters ------------------------
>
> #debug=3 # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no # (cmd line: -E)
>
> #/* Uncomment these lines to enter debugging mode
> debug=9
> fork=yes
> log_stderror=yes
> #*/
>
> check_via=no # (cmd. line: -v)
> dns=no # (cmd. line: -r)
> rev_dns=no # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
>
> # ------------------ module loading ----------------------------------
>
> # Uncomment this if you want to use SQL database
> #loadmodule "//lib/ser/modules/mysql.so"
>
> loadmodule "//lib/ser/modules/sl.so"
> loadmodule "//lib/ser/modules/tm.so"
> loadmodule "//lib/ser/modules/rr.so"
> loadmodule "//lib/ser/modules/maxfwd.so"
> loadmodule "//lib/ser/modules/usrloc.so"
> loadmodule "//lib/ser/modules/registrar.so"
> loadmodule "//lib/ser/modules/group_radius.so"
> #loadmodule "//lib/ser/modules/group.so"
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> loadmodule "//lib/ser/modules/auth.so"
> #loadmodule "//lib/ser/modules/auth_db.so"
> loadmodule "//lib/ser/modules/auth_radius.so"
> loadmodule "//lib/ser/modules/acc.so"
> #loadmodule "//lib/ser/modules/uri.so"
> # ----------------- setting module-specific parameters ---------------
>
> # -- usrloc params --
> #modparam("usrloc", "db_mode", 0)
> # Uncomment this if you want to use SQL database
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config),
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
>
> modparam("rr", "enable_full_lr", 1)
> modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius","service_type",15)
> modparam("acc", "log_level", 1)
> modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf")
> modparam("acc", "service_type", 15)
> modparam("acc", "radius_flag", 1)
> modparam("acc", "radius_missed_flag", 3)
>
>
>
> # ------------------------- request routing logic -------------------
>
> # main routing logic
>
>
> route{
>
> setflag(1);
> if (method=="REGISTER")
> log(1, "REGISTER message received\n");
>
> if (method=="INVITE")
> log(1, "INVITE message received\n");
>
> if (method=="ACK")
> log(1, "ACK message received\n");
>
> if (method=="BYE")
> log(1, "BYE message received\n");
>
> if (method=="CANCEL")
> log(1, "CANCEL message received\n");
>
> if (method=="SUBSCRIBE")
> log(1, "SUBSCRIBE message received\n");
>
> if (method=="NOTIFY")
> log(1, "NOTIFY message received\n");
>
> if (method=="OPTIONS")
> log(1, "OPTIONS message received\n");
>
> if (method=="INFO")
> log(1, "INFO message received\n");
>
> if (method=="MESSAGE")
> log(1, "MESSAGE message received\n");
>
> if (method=="REFER")
> log(1, "REFER message received\n");
>
>
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
> # Uncomment this if you want to use digest authentication
> if (!radius_www_authorize("")) {
> www_challenge("", "1");
> break;
> };
>
> save("location");
> break;
> };
>
>
> #Labeled transactions for accounting
> #if (method =="INVITE" | method == "BYE")
> # {
> # log(1,"INVITE or BYE\n");
> # setflag(1);
> # };
> #if (method=="MESSAGE") {
> # log(1,"MESSAGE\n");
> # setflag(1);
> # };
> #if (method=="BYE"){
> # log (1, "BYEd or CANCEL\n");
> # setflag(1);
> # };
> #if (method=="CANCEL"){
> # log (1, "BYEe or CANCEL\n");
> # setflag(1);
> # };
>
>
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
> }
>
> ser:/var/log/radius/radacct #
>
>
>
>
>
>
>
> [Serusers] Still trying to get radius Accounting!!!!!!!!!!
>
>
>
>
>
>
>
>
>
> Klaus Darilion <klaus.mailinglists at pernau.at> escribi?:
>
> > try setflag(1); for the transactions you want to account!
> >
> > klaus
> >
> > Rafael J. Risco G.V. wrote:
> >
> > > hello serusers!
> > > I have followed these instructions carefully
> > again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can
> > see that authentication process works well but I did not see any
> > "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X
> > debug, please can someone send me an example of ser.cfg configuration
> > for this purpose?
> > >
> > > thanks
> > > Rafael
> > >
> > > PS: my current ser.cfg configuration is shown below, freeradius it is
> > installed in the same host (SuSe Linux 9.0):
> > >
> > > ser:/var/log/radius/radacct # more /etc/ser/ser.cfg
> > > #
> > > # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> > > #
> > > # simple quick-start config script
> > > #
> > >
> > > # ----------- global configuration parameters
> > ------------------------
> > >
> > > #debug=3 # debug level (cmd line: -dddddddddd)
> > > #fork=yes
> > > #log_stderror=no # (cmd line: -E)
> > >
> > > #/* Uncomment these lines to enter debugging mode
> > > debug=9
> > > fork=yes
> > > log_stderror=yes
> > > #*/
> > >
> > > check_via=no # (cmd. line: -v)
> > > dns=no # (cmd. line: -r)
> > > rev_dns=no # (cmd. line: -R)
> > > #port=5060
> > > #children=4
> > > fifo="/tmp/ser_fifo"
> > >
> > > # ------------------ module loading
> > ----------------------------------
> > >
> > > # Uncomment this if you want to use SQL database
> > > #loadmodule "//lib/ser/modules/mysql.so"
> > >
> > > loadmodule "//lib/ser/modules/sl.so"
> > > loadmodule "//lib/ser/modules/tm.so"
> > > loadmodule "//lib/ser/modules/rr.so"
> > > loadmodule "//lib/ser/modules/maxfwd.so"
> > > loadmodule "//lib/ser/modules/usrloc.so"
> > > loadmodule "//lib/ser/modules/registrar.so"
> > > loadmodule "//lib/ser/modules/group_radius.so"
> > >
> > > #loadmodule "//lib/ser/modules/group.so"
> > > # Uncomment this if you want digest authentication
> > > # mysql.so must be loaded !
> > >
> > > loadmodule "//lib/ser/modules/auth.so"
> > >
> > > #loadmodule "//lib/ser/modules/auth_db.so"
> > >
> > > loadmodule "//lib/ser/modules/auth_radius.so"
> > > loadmodule "//lib/ser/modules/acc.so"
> > >
> > > #loadmodule "//lib/ser/modules/uri.so"
> > >
> > > # ----------------- setting module-specific parameters
> > ---------------
> > > # -- usrloc params --
> > > #modparam("usrloc", "db_mode", 0)
> > > # Uncomment this if you want to use SQL database
> > > # for persistent storage and comment the previous line
> > > #modparam("usrloc", "db_mode", 2)
> > > # -- auth params --
> > > # Uncomment if you are using auth module
> > > #
> > > #modparam("auth_db", "calculate_ha1", yes)
> > > #
> > > # If you set "calculate_ha1" parameter to yes (which true in this
> > config),
> > > # uncomment also the following parameter)
> > > #
> > > #modparam("auth_db", "password_column", "password")
> > >
> > > # -- rr params --
> > > # add value to ;lr param to make some broken UAs happy
> > >
> > > modparam("rr", "enable_full_lr", 1)
> > >
> > modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
> > > modparam("auth_radius","service_type",15)
> > > modparam("acc",
> > "radius_config","/etc/radiusclient/radiusclient.conf")
> > > modparam("acc", "service_type", 15)
> > > modparam("acc", "radius_flag", 1)
> > > modparam("acc", "radius_missed_flag", 3)
> > >
> > >
> > >
> > > # ------------------------- request routing logic
> > -------------------
> > >
> > > # main routing logic
> > >
> > > route{
> > >
> > > # initial sanity checks -- messages with
> > > # max_forwards==0, or excessively long requests
> > > if (!mf_process_maxfwd_header("10")) {
> > > sl_send_reply("483","Too Many Hops");
> > > break;
> > > };
> > > if ( msg:len > max_len ) {
> > > sl_send_reply("513", "Message too big");
> > > break;
> > > };
> > >
> > > # we record-route all messages -- to make sure that
> > > # subsequent messages will go through our proxy; that's
> > > # particularly good if upstream and downstream entities
> > > # use different transport protocol
> > > record_route();
> > > # loose-route processing
> > > if (loose_route()) {
> > > t_relay();
> > > break;
> > > };
> > >
> > > # if the request is for other domain use UsrLoc
> > > # (in case, it does not work, use the following command
> > > # with proper names and addresses in it)
> > > if (uri==myself) {
> > >
> > > if (method=="REGISTER") {
> > >
> > > # Uncomment this if you want to use digest authentication
> > > if (!radius_www_authorize("")) {
> > > www_challenge("", "0");
> > > break;
> > > };
> > >
> > > save("location");
> > > break;
> > > };
> > >
> > > # native SIP destinations are handled using our USRLOC
> > DB
> > > if (!lookup("location")) {
> > > sl_send_reply("404", "Not Found");
> > > break;
> > > };
> > > };
> > > # forward to current uri now; use stateful forwarding; that
> > > # works reliably even if we forward from TCP to UDP
> > > if (!t_relay()) {
> > > sl_reply_error();
> > > };
> > >
> > > }
> > > ser:/var/log/radius/radacct #
> > >
> > >
> > > _______________________________________________
> > > Serusers mailing list
> > > serusers at lists.iptel.org
> > > http://lists.iptel.org/mailman/listinfo/serusers
> > >
> > >
> >
>
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
More information about the sr-users
mailing list