[Serusers] Radius Accounting - HowTo !

[Klaus Darilion]

try setflag(1); for the transactions you want to account!

klaus

Rafael J. Risco G.V. wrote:

> hello serusers!
> I have followed these instructions carefully again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug, please can someone send me an example of ser.cfg configuration for this purpose?
> 
> thanks 
> Rafael
> 
> PS: my current ser.cfg configuration is shown below, freeradius it is installed in the same host (SuSe Linux 9.0):
> 
> ser:/var/log/radius/radacct # more /etc/ser/ser.cfg      
> #
> # $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> #
> # simple quick-start config script
> #
> 
> # ----------- global configuration parameters ------------------------
> 
> #debug=3         # debug level (cmd line: -dddddddddd)
> #fork=yes
> #log_stderror=no        # (cmd line: -E)
> 
> #/* Uncomment these lines to enter debugging mode 
> debug=9
> fork=yes
> log_stderror=yes
> #*/
> 
> check_via=no    # (cmd. line: -v)
> dns=no           # (cmd. line: -r)
> rev_dns=no      # (cmd. line: -R)
> #port=5060
> #children=4
> fifo="/tmp/ser_fifo"
> 
> # ------------------ module loading ----------------------------------
> 
> # Uncomment this if you want to use SQL database
> #loadmodule "//lib/ser/modules/mysql.so"
> 
> loadmodule "//lib/ser/modules/sl.so"
> loadmodule "//lib/ser/modules/tm.so"
> loadmodule "//lib/ser/modules/rr.so"
> loadmodule "//lib/ser/modules/maxfwd.so"
> loadmodule "//lib/ser/modules/usrloc.so"
> loadmodule "//lib/ser/modules/registrar.so"
> loadmodule "//lib/ser/modules/group_radius.so"
> 
> #loadmodule "//lib/ser/modules/group.so"
> # Uncomment this if you want digest authentication
> # mysql.so must be loaded !
> 
> loadmodule "//lib/ser/modules/auth.so"
> 
> #loadmodule "//lib/ser/modules/auth_db.so"
> 
> loadmodule "//lib/ser/modules/auth_radius.so"
> loadmodule "//lib/ser/modules/acc.so"
> 
> #loadmodule "//lib/ser/modules/uri.so"
> 
> # ----------------- setting module-specific parameters ---------------
> # -- usrloc params --
> #modparam("usrloc", "db_mode",   0)
> # Uncomment this if you want to use SQL database 
> # for persistent storage and comment the previous line
> #modparam("usrloc", "db_mode", 2)
> # -- auth params --
> # Uncomment if you are using auth module
> #
> #modparam("auth_db", "calculate_ha1", yes)
> #
> # If you set "calculate_ha1" parameter to yes (which true in this config), 
> # uncomment also the following parameter)
> #
> #modparam("auth_db", "password_column", "password")
> 
> # -- rr params --
> # add value to ;lr param to make some broken UAs happy
> 
> modparam("rr", "enable_full_lr", 1)
> modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
> modparam("auth_radius","service_type",15)
> modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf")
> modparam("acc", "service_type", 15)
> modparam("acc", "radius_flag", 1)
> modparam("acc", "radius_missed_flag", 3)
> 
> 
> 
> # -------------------------  request routing logic -------------------
> 
> # main routing logic
> 
> route{
> 
>         # initial sanity checks -- messages with
>         # max_forwards==0, or excessively long requests
>         if (!mf_process_maxfwd_header("10")) {
>                 sl_send_reply("483","Too Many Hops");
>                 break;
>         };
>         if ( msg:len > max_len ) {
>                 sl_send_reply("513", "Message too big");
>                 break;
>         };
> 
>         # we record-route all messages -- to make sure that
>         # subsequent messages will go through our proxy; that's
>         # particularly good if upstream and downstream entities
>         # use different transport protocol
>         record_route();
>         # loose-route processing
>         if (loose_route()) {
>                 t_relay();
>                 break;
>         };
> 
>         # if the request is for other domain use UsrLoc
>         # (in case, it does not work, use the following command
>         # with proper names and addresses in it)
>         if (uri==myself) {
> 
>                 if (method=="REGISTER") {
> 
> # Uncomment this if you want to use digest authentication
>                         if (!radius_www_authorize("")) {
>                                 www_challenge("", "0");
>                                 break;
>                         };
> 
>                         save("location");
>                         break;
>                 };
> 
>                 # native SIP destinations are handled using our USRLOC DB
>                 if (!lookup("location")) {
>                         sl_send_reply("404", "Not Found");
>                         break;
>                 };
>         };
>         # forward to current uri now; use stateful forwarding; that
>         # works reliably even if we forward from TCP to UDP
>         if (!t_relay()) {
>                 sl_reply_error();
>         };
> 
> }
> ser:/var/log/radius/radacct #  
> 
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org
> http://lists.iptel.org/mailman/listinfo/serusers
> 
>