[Serusers] Radius Accounting - HowTo !

[Rafael J. Risco G.V.]

hello serusers!
I have followed these instructions carefully again(http://iptel.org/ser/doc/ser_radius/ser_radius.html) and now I can see that authentication process works well but I did not see any "Accounting Report" in /var/log/radius/radacct/ or neither in radiusd -X debug, please can someone send me an example of ser.cfg configuration for this purpose?

thanks 
Rafael

PS: my current ser.cfg configuration is shown below, freeradius it is installed in the same host (SuSe Linux 9.0):

ser:/var/log/radius/radacct # more /etc/ser/ser.cfg      
#
# $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
#
# simple quick-start config script
#

# ----------- global configuration parameters ------------------------

#debug=3         # debug level (cmd line: -dddddddddd)
#fork=yes
#log_stderror=no        # (cmd line: -E)

#/* Uncomment these lines to enter debugging mode 
debug=9
fork=yes
log_stderror=yes
#*/

check_via=no    # (cmd. line: -v)
dns=no           # (cmd. line: -r)
rev_dns=no      # (cmd. line: -R)
#port=5060
#children=4
fifo="/tmp/ser_fifo"

# ------------------ module loading ----------------------------------

# Uncomment this if you want to use SQL database
#loadmodule "//lib/ser/modules/mysql.so"

loadmodule "//lib/ser/modules/sl.so"
loadmodule "//lib/ser/modules/tm.so"
loadmodule "//lib/ser/modules/rr.so"
loadmodule "//lib/ser/modules/maxfwd.so"
loadmodule "//lib/ser/modules/usrloc.so"
loadmodule "//lib/ser/modules/registrar.so"
loadmodule "//lib/ser/modules/group_radius.so"

#loadmodule "//lib/ser/modules/group.so"
# Uncomment this if you want digest authentication
# mysql.so must be loaded !

loadmodule "//lib/ser/modules/auth.so"

#loadmodule "//lib/ser/modules/auth_db.so"

loadmodule "//lib/ser/modules/auth_radius.so"
loadmodule "//lib/ser/modules/acc.so"

#loadmodule "//lib/ser/modules/uri.so"

# ----------------- setting module-specific parameters ---------------
# -- usrloc params --
#modparam("usrloc", "db_mode",   0)
# Uncomment this if you want to use SQL database 
# for persistent storage and comment the previous line
#modparam("usrloc", "db_mode", 2)
# -- auth params --
# Uncomment if you are using auth module
#
#modparam("auth_db", "calculate_ha1", yes)
#
# If you set "calculate_ha1" parameter to yes (which true in this config), 
# uncomment also the following parameter)
#
#modparam("auth_db", "password_column", "password")

# -- rr params --
# add value to ;lr param to make some broken UAs happy

modparam("rr", "enable_full_lr", 1)
modparam("auth_radius","radius_config","/etc/radiusclient/radiusclient.conf")
modparam("auth_radius","service_type",15)
modparam("acc", "radius_config","/etc/radiusclient/radiusclient.conf")
modparam("acc", "service_type", 15)
modparam("acc", "radius_flag", 1)
modparam("acc", "radius_missed_flag", 3)



# -------------------------  request routing logic -------------------

# main routing logic

route{

        # initial sanity checks -- messages with
        # max_forwards==0, or excessively long requests
        if (!mf_process_maxfwd_header("10")) {
                sl_send_reply("483","Too Many Hops");
                break;
        };
        if ( msg:len > max_len ) {
                sl_send_reply("513", "Message too big");
                break;
        };

        # we record-route all messages -- to make sure that
        # subsequent messages will go through our proxy; that's
        # particularly good if upstream and downstream entities
        # use different transport protocol
        record_route();
        # loose-route processing
        if (loose_route()) {
                t_relay();
                break;
        };

        # if the request is for other domain use UsrLoc
        # (in case, it does not work, use the following command
        # with proper names and addresses in it)
        if (uri==myself) {

                if (method=="REGISTER") {

# Uncomment this if you want to use digest authentication
                        if (!radius_www_authorize("")) {
                                www_challenge("", "0");
                                break;
                        };

                        save("location");
                        break;
                };

                # native SIP destinations are handled using our USRLOC DB
                if (!lookup("location")) {
                        sl_send_reply("404", "Not Found");
                        break;
                };
        };
        # forward to current uri now; use stateful forwarding; that
        # works reliably even if we forward from TCP to UDP
        if (!t_relay()) {
                sl_reply_error();
        };

}
ser:/var/log/radius/radacct #