[Serusers] (no subject)
Jiang zhou
zjiang at photonicbridges.com
Tue Jun 1 11:00:47 CEST 2004
Hi,Kapil Dhawan
Thank you very much! It is my mysqlclient's so version is too newer for ser-0.8-12. Now I reinstall mysql shared lib, it is ok.
Best Regards
Jiang zhou
Email:zjiang at photonicbridges.com
2004-06-01
======= 2004-06-01 16:18:35 you have wrote：=======
>Try this file
>This will tell you the exact errors on console
>
>#
># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
>#
># simple quick-start config script
>#
>
># ----------- global configuration parameters ------------------------
>
>debug=7 # debug level (cmd line: -dddddddddd)
>#fork=yes
>log_stderror=yes # (cmd line: -E)
>
>/* Uncomment these lines to enter debugging mode
>debug=7
>fork=no
>log_stderror=yes
>*/
>
>check_via=no # (cmd. line: -v)
>dns=no # (cmd. line: -r)
>rev_dns=no # (cmd. line: -R)
>#port=5060
>#children=4
>fifo="/tmp/ser_fifo"
>
># ------------------ module loading ----------------------------------
>
># Uncomment this if you want to use SQL database
>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>
>loadmodule "/usr/local/lib/ser/modules/sl.so"
>loadmodule "/usr/local/lib/ser/modules/tm.so"
>loadmodule "/usr/local/lib/ser/modules/rr.so"
>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>
># Uncomment this if you want digest authentication
># mysql.so must be loaded !
>loadmodule "/usr/local/lib/ser/modules/auth.so"
>loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>
># ----------------- setting module-specific parameters ---------------
>
># -- usrloc params --
>
>#modparam("usrloc", "db_mode", 0)
>
># Uncomment this if you want to use SQL database
># for persistent storage and comment the previous line
>modparam("usrloc", "db_mode", 2)
>
># -- auth params --
># Uncomment if you are using auth module
>
>modparam("auth_db", "calculate_ha1", yes)
>#
># If you set "calculate_ha1" parameter to yes (which true in this config),
># uncomment also the following parameter)
>#
>modparam("auth_db", "password_column", "password")
>
># -- rr params --
># add value to ;lr param to make some broken UAs happy
>modparam("rr", "enable_full_lr", 1)
>
># ------------------------- request routing logic -------------------
>
># main routing logic
>
>route{
>
> # initial sanity checks -- messages with
> # max_forwards==0, or excessively long requests
> if (!mf_process_maxfwd_header("10")) {
> sl_send_reply("483","Too Many Hops");
> break;
> };
> if ( msg:len > max_len ) {
> sl_send_reply("513", "Message too big");
> break;
> };
>
> # we record-route all messages -- to make sure that
> # subsequent messages will go through our proxy; that's
> # particularly good if upstream and downstream entities
> # use different transport protocol
> record_route();
> # loose-route processing
> if (loose_route()) {
> t_relay();
> break;
> };
>
> # if the request is for other domain use UsrLoc
> # (in case, it does not work, use the following command
> # with proper names and addresses in it)
> if (uri==myself) {
>
> if (method=="REGISTER") {
>
># Uncomment this if you want to use digest authentication
># if (!www_authorize("iptel.org", "subscriber")) {
># www_challenge("iptel.org", "0");
># break;
># };
>
> save("location");
> break;
> };
>
> # native SIP destinations are handled using our USRLOC DB
> if (!lookup("location")) {
> sl_send_reply("404", "Not Found");
> break;
> };
> };
> # forward to current uri now; use stateful forwarding; that
> # works reliably even if we forward from TCP to UDP
> if (!t_relay()) {
> sl_reply_error();
> };
>
>}
>
>
>
>
>>From: "Jiang zhou" <zjiang at photonicbridges.com>
>>Reply-To: zjiang at photonicbridges.com
>>To: "Kapil Dhawan" <sersavvy at hotmail.com>, "serusers at iptel.org"
>><serusers at iptel.org>
>>Subject: Re: Re: RE: [Serusers] (no subject)
>>Date: Tue, 1 Jun 2004 15:51:56 +0800
>>
>>Hi,Kapil Dhawan
>>
>>#
>># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
>>#
>># simple quick-start config script
>>#
>>
>># ----------- global configuration parameters ------------------------
>>
>>#debug=3 # debug level (cmd line: -dddddddddd)
>>#fork=yes
>>#log_stderror=no # (cmd line: -E)
>>
>>/* Uncomment these lines to enter debugging mode
>>debug=7
>>fork=no
>>log_stderror=yes
>>*/
>>
>>check_via=no # (cmd. line: -v)
>>dns=no # (cmd. line: -r)
>>rev_dns=no # (cmd. line: -R)
>>#port=5060
>>#children=4
>>fifo="/tmp/ser_fifo"
>>
>># ------------------ module loading ----------------------------------
>>
>># Uncomment this if you want to use SQL database
>>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>>
>>loadmodule "/usr/local/lib/ser/modules/sl.so"
>>loadmodule "/usr/local/lib/ser/modules/tm.so"
>>loadmodule "/usr/local/lib/ser/modules/rr.so"
>>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
>>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
>>loadmodule "/usr/local/lib/ser/modules/registrar.so"
>>
>># Uncomment this if you want digest authentication
>># mysql.so must be loaded !
>>#loadmodule "/usr/local/lib/ser/modules/auth.so"
>>#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
>>
>># ----------------- setting module-specific parameters ---------------
>>
>># -- usrloc params --
>>
>>modparam("usrloc", "db_mode", 0)
>>
>># Uncomment this if you want to use SQL database
>># for persistent storage and comment the previous line
>>#modparam("usrloc", "db_mode", 2)
>>
>># -- auth params --
>># Uncomment if you are using auth module
>>
>>#modparam("auth_db", "calculate_ha1", yes)
>>#
>># If you set "calculate_ha1" parameter to yes (which true in this config),
>># uncomment also the following parameter)
>>#
>>#modparam("auth_db", "password_column", "password")
>>
>># -- rr params --
>># add value to ;lr param to make some broken UAs happy
>>modparam("rr", "enable_full_lr", 1)
>>
>># ------------------------- request routing logic -------------------
>>
>># main routing logic
>>
>>route{
>>
>> # initial sanity checks -- messages with
>> # max_forwards==0, or excessively long requests
>> if (!mf_process_maxfwd_header("10")) {
>> sl_send_reply("483","Too Many Hops");
>> break;
>> };
>> if ( msg:len > max_len ) {
>> sl_send_reply("513", "Message too big");
>> break;
>> };
>>
>> # we record-route all messages -- to make sure that
>> # subsequent messages will go through our proxy; that's
>> # particularly good if upstream and downstream entities
>> # use different transport protocol
>> record_route();
>> # loose-route processing
>> if (loose_route()) {
>> t_relay();
>> break;
>> };
>>
>> # if the request is for other domain use UsrLoc
>> # (in case, it does not work, use the following command
>> # with proper names and addresses in it)
>> if (uri==myself) {
>>
>> if (method=="REGISTER") {
>>
>># Uncomment this if you want to use digest authentication
>># if (!www_authorize("iptel.org", "subscriber")) {
>># www_challenge("iptel.org", "0");
>># break;
>># };
>>
>> save("location");
>> break;
>> };
>>
>> # native SIP destinations are handled using our USRLOC DB
>> if (!lookup("location")) {
>> sl_send_reply("404", "Not Found");
>> break;
>> };
>> };
>> # forward to current uri now; use stateful forwarding; that
>> # works reliably even if we forward from TCP to UDP
>> if (!t_relay()) {
>> sl_reply_error();
>> };
>>
>>}
>>
>>
>>
>>Best Regards
>>Jiang zhou
>>Email:zjiang at photonicbridges.com
>>2004-06-01
>>
>>======= 2004-06-01 15:38:36 you have wrote：=======
>>
>> >pls paste your ser.cfg file
>> >
>> >
>> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
>> >>Reply-To: zjiang at photonicbridges.com
>> >>To: "Kapil Dhawan" <sersavvy at hotmail.com>
>> >>CC: "serusers at iptel.org" <serusers at iptel.org>
>> >>Subject: Re: RE: [Serusers] (no subject)
>> >>Date: Tue, 1 Jun 2004 14:20:15 +0800
>> >>
>> >>Hi,Kapil Dhawan
>> >>
>> >>Yes, I want to use database to store my users list. I modified the
>>ser.cfg
>> >>to support mysql. But once I uncomment this loadmodule line, ser can't
>> >>startup with a bad config file.
>> >>
>> >>Best Regards
>> >>Jiang zhou
>> >>Email:zjiang at photonicbridges.com
>> >>2004-06-01
>> >>
>> >>======= 2004-06-01 14:11:00 you have wrote：=======
>> >>
>> >> >mysql.so is a database module. if you want to store users list etc in
>> >> >database then you have to use it...
>> >> >
>> >> >
>> >> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
>> >> >>Reply-To: zjiang at photonicbridges.com
>> >> >>To: "serusers" <serusers at iptel.org>
>> >> >>Subject: [Serusers] (no subject)
>> >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800
>> >> >>
>> >> >>Hi,serusers-request
>> >> >>
>> >> >>In my ser.cfg there is a line as :
>> >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so"
>> >> >>
>> >> >>When I start ser, it tell the follow error:
>> >> >>ERROR: bad config file (1 errors)
>> >> >>
>> >> >>I have the mysql.so in /usr/local/lib/ser/modules/
>> >> >>
>> >> >>If I comment it, ser can run.
>> >> >>
>> >> >>Can someone tell me why?
>> >> >>
>> >> >>Best Regards
>> >> >>Jiang zhou
>> >> >>2004-06-01
>> >> >>
>> >> >>
>> >> >>_______________________________________________
>> >> >>Serusers mailing list
>> >> >>Serusers at iptel.org
>> >> >>http://mail.iptel.org/mailman/listinfo/serusers
>> >> >
>> >> >_________________________________________________________________
>> >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp
>>Build
>> >> >with Citibank Home Loans.
>> >> >
>> >> >.
>> >>
>> >>= = = = = = = = = = = = = = = = = = = =
>> >>
>> >
>> >_________________________________________________________________
>> >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp
>> >Fulfill all your dreams with Citibank Ready Cash!
>> >
>> >.
>>
>>= = = = = = = = = = = = = = = = = = = =
>>
>
>_________________________________________________________________
>Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
>Only on www.shaadi.com. Register now!
>
= = = = = = = = = = = = = = = = = = = =
More information about the sr-users
mailing list