[Serusers] (no subject)
Kapil Dhawan
sersavvy at hotmail.com
Tue Jun 1 11:05:44 CEST 2004
Welcome
>From: "Jiang zhou" <zjiang at photonicbridges.com>
>Reply-To: zjiang at photonicbridges.com
>To: "Kapil Dhawan" <sersavvy at hotmail.com>
>CC: "serusers at lists.iptel.org" <serusers at lists.iptel.org>
>Subject: Re: Re: Re: RE: [Serusers] (no subject)
>Date: Tue, 1 Jun 2004 17:00:47 +0800
>
>Hi,Kapil Dhawan
>
>Thank you very much! It is my mysqlclient's so version is too newer for
>ser-0.8-12. Now I reinstall mysql shared lib, it is ok.
>
>Best Regards
>Jiang zhou
>Email:zjiang at photonicbridges.com
>2004-06-01
>
>======= 2004-06-01 16:18:35 you have wrote£º=======
>
> >Try this file
> >This will tell you the exact errors on console
> >
> >#
> ># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> >#
> ># simple quick-start config script
> >#
> >
> ># ----------- global configuration parameters ------------------------
> >
> >debug=7 # debug level (cmd line: -dddddddddd)
> >#fork=yes
> >log_stderror=yes # (cmd line: -E)
> >
> >/* Uncomment these lines to enter debugging mode
> >debug=7
> >fork=no
> >log_stderror=yes
> >*/
> >
> >check_via=no # (cmd. line: -v)
> >dns=no # (cmd. line: -r)
> >rev_dns=no # (cmd. line: -R)
> >#port=5060
> >#children=4
> >fifo="/tmp/ser_fifo"
> >
> ># ------------------ module loading ----------------------------------
> >
> ># Uncomment this if you want to use SQL database
> >loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >
> >loadmodule "/usr/local/lib/ser/modules/sl.so"
> >loadmodule "/usr/local/lib/ser/modules/tm.so"
> >loadmodule "/usr/local/lib/ser/modules/rr.so"
> >loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> >loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> >loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >
> ># Uncomment this if you want digest authentication
> ># mysql.so must be loaded !
> >loadmodule "/usr/local/lib/ser/modules/auth.so"
> >loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >
> ># ----------------- setting module-specific parameters ---------------
> >
> ># -- usrloc params --
> >
> >#modparam("usrloc", "db_mode", 0)
> >
> ># Uncomment this if you want to use SQL database
> ># for persistent storage and comment the previous line
> >modparam("usrloc", "db_mode", 2)
> >
> ># -- auth params --
> ># Uncomment if you are using auth module
> >
> >modparam("auth_db", "calculate_ha1", yes)
> >#
> ># If you set "calculate_ha1" parameter to yes (which true in this
>config),
> ># uncomment also the following parameter)
> >#
> >modparam("auth_db", "password_column", "password")
> >
> ># -- rr params --
> ># add value to ;lr param to make some broken UAs happy
> >modparam("rr", "enable_full_lr", 1)
> >
> ># ------------------------- request routing logic -------------------
> >
> ># main routing logic
> >
> >route{
> >
> > # initial sanity checks -- messages with
> > # max_forwards==0, or excessively long requests
> > if (!mf_process_maxfwd_header("10")) {
> > sl_send_reply("483","Too Many Hops");
> > break;
> > };
> > if ( msg:len > max_len ) {
> > sl_send_reply("513", "Message too big");
> > break;
> > };
> >
> > # we record-route all messages -- to make sure that
> > # subsequent messages will go through our proxy; that's
> > # particularly good if upstream and downstream entities
> > # use different transport protocol
> > record_route();
> > # loose-route processing
> > if (loose_route()) {
> > t_relay();
> > break;
> > };
> >
> > # if the request is for other domain use UsrLoc
> > # (in case, it does not work, use the following command
> > # with proper names and addresses in it)
> > if (uri==myself) {
> >
> > if (method=="REGISTER") {
> >
> ># Uncomment this if you want to use digest authentication
> ># if (!www_authorize("iptel.org", "subscriber")) {
> ># www_challenge("iptel.org", "0");
> ># break;
> ># };
> >
> > save("location");
> > break;
> > };
> >
> > # native SIP destinations are handled using our USRLOC DB
> > if (!lookup("location")) {
> > sl_send_reply("404", "Not Found");
> > break;
> > };
> > };
> > # forward to current uri now; use stateful forwarding; that
> > # works reliably even if we forward from TCP to UDP
> > if (!t_relay()) {
> > sl_reply_error();
> > };
> >
> >}
> >
> >
> >
> >
> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
> >>Reply-To: zjiang at photonicbridges.com
> >>To: "Kapil Dhawan" <sersavvy at hotmail.com>, "serusers at lists.iptel.org"
> >><serusers at lists.iptel.org>
> >>Subject: Re: Re: RE: [Serusers] (no subject)
> >>Date: Tue, 1 Jun 2004 15:51:56 +0800
> >>
> >>Hi,Kapil Dhawan
> >>
> >>#
> >># $Id: ser.cfg,v 1.21.4.1 2003/11/10 15:35:15 andrei Exp $
> >>#
> >># simple quick-start config script
> >>#
> >>
> >># ----------- global configuration parameters ------------------------
> >>
> >>#debug=3 # debug level (cmd line: -dddddddddd)
> >>#fork=yes
> >>#log_stderror=no # (cmd line: -E)
> >>
> >>/* Uncomment these lines to enter debugging mode
> >>debug=7
> >>fork=no
> >>log_stderror=yes
> >>*/
> >>
> >>check_via=no # (cmd. line: -v)
> >>dns=no # (cmd. line: -r)
> >>rev_dns=no # (cmd. line: -R)
> >>#port=5060
> >>#children=4
> >>fifo="/tmp/ser_fifo"
> >>
> >># ------------------ module loading ----------------------------------
> >>
> >># Uncomment this if you want to use SQL database
> >>loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >>
> >>loadmodule "/usr/local/lib/ser/modules/sl.so"
> >>loadmodule "/usr/local/lib/ser/modules/tm.so"
> >>loadmodule "/usr/local/lib/ser/modules/rr.so"
> >>loadmodule "/usr/local/lib/ser/modules/maxfwd.so"
> >>loadmodule "/usr/local/lib/ser/modules/usrloc.so"
> >>loadmodule "/usr/local/lib/ser/modules/registrar.so"
> >>
> >># Uncomment this if you want digest authentication
> >># mysql.so must be loaded !
> >>#loadmodule "/usr/local/lib/ser/modules/auth.so"
> >>#loadmodule "/usr/local/lib/ser/modules/auth_db.so"
> >>
> >># ----------------- setting module-specific parameters ---------------
> >>
> >># -- usrloc params --
> >>
> >>modparam("usrloc", "db_mode", 0)
> >>
> >># Uncomment this if you want to use SQL database
> >># for persistent storage and comment the previous line
> >>#modparam("usrloc", "db_mode", 2)
> >>
> >># -- auth params --
> >># Uncomment if you are using auth module
> >>
> >>#modparam("auth_db", "calculate_ha1", yes)
> >>#
> >># If you set "calculate_ha1" parameter to yes (which true in this
>config),
> >># uncomment also the following parameter)
> >>#
> >>#modparam("auth_db", "password_column", "password")
> >>
> >># -- rr params --
> >># add value to ;lr param to make some broken UAs happy
> >>modparam("rr", "enable_full_lr", 1)
> >>
> >># ------------------------- request routing logic -------------------
> >>
> >># main routing logic
> >>
> >>route{
> >>
> >> # initial sanity checks -- messages with
> >> # max_forwards==0, or excessively long requests
> >> if (!mf_process_maxfwd_header("10")) {
> >> sl_send_reply("483","Too Many Hops");
> >> break;
> >> };
> >> if ( msg:len > max_len ) {
> >> sl_send_reply("513", "Message too big");
> >> break;
> >> };
> >>
> >> # we record-route all messages -- to make sure that
> >> # subsequent messages will go through our proxy; that's
> >> # particularly good if upstream and downstream entities
> >> # use different transport protocol
> >> record_route();
> >> # loose-route processing
> >> if (loose_route()) {
> >> t_relay();
> >> break;
> >> };
> >>
> >> # if the request is for other domain use UsrLoc
> >> # (in case, it does not work, use the following command
> >> # with proper names and addresses in it)
> >> if (uri==myself) {
> >>
> >> if (method=="REGISTER") {
> >>
> >># Uncomment this if you want to use digest authentication
> >># if (!www_authorize("iptel.org", "subscriber")) {
> >># www_challenge("iptel.org", "0");
> >># break;
> >># };
> >>
> >> save("location");
> >> break;
> >> };
> >>
> >> # native SIP destinations are handled using our USRLOC DB
> >> if (!lookup("location")) {
> >> sl_send_reply("404", "Not Found");
> >> break;
> >> };
> >> };
> >> # forward to current uri now; use stateful forwarding; that
> >> # works reliably even if we forward from TCP to UDP
> >> if (!t_relay()) {
> >> sl_reply_error();
> >> };
> >>
> >>}
> >>
> >>
> >>
> >>Best Regards
> >>Jiang zhou
> >>Email:zjiang at photonicbridges.com
> >>2004-06-01
> >>
> >>======= 2004-06-01 15:38:36 you have wrote£º=======
> >>
> >> >pls paste your ser.cfg file
> >> >
> >> >
> >> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
> >> >>Reply-To: zjiang at photonicbridges.com
> >> >>To: "Kapil Dhawan" <sersavvy at hotmail.com>
> >> >>CC: "serusers at lists.iptel.org" <serusers at lists.iptel.org>
> >> >>Subject: Re: RE: [Serusers] (no subject)
> >> >>Date: Tue, 1 Jun 2004 14:20:15 +0800
> >> >>
> >> >>Hi,Kapil Dhawan
> >> >>
> >> >>Yes, I want to use database to store my users list. I modified the
> >>ser.cfg
> >> >>to support mysql. But once I uncomment this loadmodule line, ser
>can't
> >> >>startup with a bad config file.
> >> >>
> >> >>Best Regards
> >> >>Jiang zhou
> >> >>Email:zjiang at photonicbridges.com
> >> >>2004-06-01
> >> >>
> >> >>======= 2004-06-01 14:11:00 you have wrote£º=======
> >> >>
> >> >> >mysql.so is a database module. if you want to store users list etc
>in
> >> >> >database then you have to use it...
> >> >> >
> >> >> >
> >> >> >>From: "Jiang zhou" <zjiang at photonicbridges.com>
> >> >> >>Reply-To: zjiang at photonicbridges.com
> >> >> >>To: "serusers" <serusers at lists.iptel.org>
> >> >> >>Subject: [Serusers] (no subject)
> >> >> >>Date: Tue, 1 Jun 2004 14:09:36 +0800
> >> >> >>
> >> >> >>Hi,serusers-request
> >> >> >>
> >> >> >>In my ser.cfg there is a line as :
> >> >> >>loadmodule "/usr/local/lib/ser/modules/mysql.so"
> >> >> >>
> >> >> >>When I start ser, it tell the follow error:
> >> >> >>ERROR: bad config file (1 errors)
> >> >> >>
> >> >> >>I have the mysql.so in /usr/local/lib/ser/modules/
> >> >> >>
> >> >> >>If I comment it, ser can run.
> >> >> >>
> >> >> >>Can someone tell me why?
> >> >> >>
> >> >> >>Best Regards
> >> >> >>Jiang zhou
> >> >> >>2004-06-01
> >> >> >>
> >> >> >>
> >> >> >>_______________________________________________
> >> >> >>Serusers mailing list
> >> >> >>serusers at lists.iptel.org
> >> >> >>http://lists.iptel.org/mailman/listinfo/serusers
> >> >> >
> >> >> >_________________________________________________________________
> >> >> >Get a Citibank Home Loan now. http://go.msnserver.com/IN/49351.asp
> >>Build
> >> >> >with Citibank Home Loans.
> >> >> >
> >> >> >.
> >> >>
> >> >>= = = = = = = = = = = = = = = = = = = =
> >> >>
> >> >
> >> >_________________________________________________________________
> >> >Holiday? Wedding? Refurnishing? http://go.msnserver.com/IN/49356.asp
> >> >Fulfill all your dreams with Citibank Ready Cash!
> >> >
> >> >.
> >>
> >>= = = = = = = = = = = = = = = = = = = =
> >>
> >
> >_________________________________________________________________
> >Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
> >Only on www.shaadi.com. Register now!
> >
>
>= = = = = = = = = = = = = = = = = = = =
>
_________________________________________________________________
Contact brides & grooms FREE! http://www.shaadi.com/ptnr.php?ptnr=hmltag
Only on www.shaadi.com. Register now!
More information about the sr-users
mailing list