[Serusers] Ser question

[Zeus Ng]

In your ser.cfg file, specify listen=xxxx where xxxx is the interface card
that has public address, like eth0.



> -----Original Message-----
> From: serusers-bounces at lists.iptel.org 
> [mailto:serusers-bounces at lists.iptel.org] On Behalf Of Igor Selivanov
> Sent: Thursday, 26 August 2004 2:55 PM
> To: serusers at lists.iptel.org
> Subject: [Serusers] Ser question
> 
> 
> I am having a rather odd problem.  I had the Ser
> server working for a while, but all the sudden,
> strange stuff started happening.  I have it running on
> Redhat AS3 Server, with 2 network cards, one with a
> public, and another with a private address.  I have
> the sip phones configured to have the public address
> as the as their sip server.  The strange thing is,
> though, when I sniff, I see the darn server get the
> Register request on the public interface, but sending
> the OK response on the private one!  I tried turning
> the private IP interface off alltogether, but then it
> simply sends nothing back at all...it has been very 
> frustrating, as it was working fine before.
> 
> _______________________________________________
> Serusers mailing list
> serusers at lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers
>