Hola tengo problemas para traspasar llamadas desde un terminal asterisk de numeracion 5XXX a un terminal en kamailio 3XXX La configuracion es muy simple Telefono3XXX<------->Kamailio<------->Asterisk<------->telefono5XXX
cuando llamo de 3100 a 5555 Kamailio le responde a asterisk con un 484 address incomplete
y cuando lo hago de 5555 a 3000 Asterisk manda un 403 forbidem
Cual es el problema? Es una configuración bien simple de antemano muchas gracias
Adjunto mi configuracion en Asterisk extensions.conf
[from-kamailio] include => from-internal
[sip-local] include => asterisk-out ;;Llamadas a extensions locales exten => _5XXX,1,NoOp(Llamada Entrante) exten => _5XXX,2, Dial(SIP/${EXTEN},20,Ttr) exten => _5XXX,3,Hangup()
[asterisk-out] ;;Llamadas hacia Kamailio exten => _3XXX,1,NoOp(Llamada hacia Kamailio) exten => _3XXX,2, Dial(SIP/${EXTEN}@10.3.0.240:5060) exten => _3XXX,3,Hangup()
sip.conf
[general] context=default register => 5999:5999@10.3.0.240 5999%3A5999@10.3.0.240 registertimeout=20 registerattempts=10 allowoverlap=no bindport=5060 srvlookup=yes
[5999] type=friend secret=5999 context=from-kamailio callerid=”Kamailio-Asterisk” <5999> username=5999 fromuser=5999 insecure=very fromdomain=10.2.0.240 call-limit=1 outboundproxy=10.2.0.240 port=5060
Adjunto mi archivo de configuracion de kamailio
***************************Archivo de configuracion de Kamailio*******************************************+
#!KAMAILIO # # $Id$ # # Kamailio (OpenSER) SIP Server v3.0 - basic configuration script # - web: http://www.kamailio.org # - git: http://sip-router.org # # Direct your questions about this file to: users@lists.kamailio.org # # Refer to the Core CookBook at http://www.kamailio.org/dokuwiki/doku.php # for an explanation of possible statements, functions and parameters. # # Several features can be enabled using '#!define WITH_FEATURE' directives: # # *** To run in debug mode: # - define WITH_DEBUG # # *** To enable mysql: # - define WITH_MYSQL # # *** To enable authentication execute: # - enable mysql # - define WITH_AUTH # - add users using 'kamctl' # # *** To enable persistent user location execute: # - enable mysql # - define WITH_USRLOCDB # # *** To enable presence server execute: # - enable mysql # - define WITH_PRESENCE # # *** To enable nat traversal execute: # - define WITH_NAT # - install RTPProxy: http://www.rtpproxy.org # - start RTPProxy: # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 # # *** To enable PSTN gateway routing execute: # - define WITH_PSTN # - set the value of pstn.gw_ip # - check route[PSTN] for regexp routing condition # # *** To enhance accounting execute: # - enable mysql # - define WITH_ACCDB # - add following columns to database #!ifdef ACCDB_COMMENT ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_call ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; #!endif
####### Global Parameters #########
#!ifdef WITH_DEBUG debug=3 log_stderror=no #!else debug=2 log_stderror=no #!endif
memdbg=5 memlog=5
log_facility=LOG_LOCAL0 fork=yes children=4
/* uncomment the next line to disable TCP (default on) */ disable_tcp=yes
/* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ auto_aliases=no dns_try_ipv6=no
port=5060
/* uncomment and configure the following line if you want Kamailio to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:10.0.0.10:5060
####### Custom Parameters #########
# These parameters can be modified runtime via RPC interface # - see the documentation of 'cfg_rpc' module. # # Format: group.id = value 'desc' description # Access: $sel(cfg_get.group.id) or @cfg_get.group.id #
#!ifdef WITH_PSTN # PSTN GW Routing # # - pstn.gw_ip: valid IP or hostname as string value, example: # pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" # # - by default is empty to avoid misrouting pstn.gw_ip = "" desc "PSTN GW Address" #!endif
####### Modules Section ########
#set module path mpath="/usr/local/lib/kamailio/modules_k/:/usr/local/lib/kamailio/modules/"
/* uncomment next line for MySQL DB support */ #!ifdef WITH_MYSQL loadmodule "db_mysql.so" #!endif loadmodule "mi_fifo.so" loadmodule "kex.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "sl.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "uri_db.so" loadmodule "siputils.so" loadmodule "xlog.so" loadmodule "sanity.so" loadmodule "ctl.so" loadmodule "mi_rpc.so" loadmodule "acc.so" #!ifdef WITH_AUTH loadmodule "auth.so" loadmodule "auth_db.so" #!endif /* uncomment next line for aliases support NOTE: a DB (like db_mysql) module must be also loaded */ #loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like db_mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ #loadmodule "domain.so" #!ifdef WITH_PRESENCE loadmodule "presence.so" loadmodule "presence_xml.so" #!endif
#!ifdef WITH_NAT loadmodule "nathelper.so" #!endif
# ----------------- setting module-specific parameters ---------------
# ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/kamailio_fifo")
# ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 0)
# ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ #modparam("registrar", "max_contacts", 10)
# ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "")
# ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) modparam("acc", "log_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") /* enhanced DB accounting */ #!ifdef WITH_ACCDB modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("acc", "db_extra", "src_user=$fU;src_domain=$fd;dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") #!endif
# ----- usrloc params ----- /* enable DB persistency for location entries */ #!ifdef WITH_USRLOCDB modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") #!endif
# ----- auth_db params ----- /* enable the DB based authentication */ #!ifdef WITH_AUTH #modparam("auth_db", "calculate_ha1", yes) #modparam("auth_db", "password_column", "password") #modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") #modparam("auth_db", "load_credentials", "") #!endif
# ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ #modparam("alias_db", "db_url", # "mysql://openser:openserrw@localhost/openser")
# ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ #modparam("domain", "db_url", # "mysql://openser:openserrw@localhost/openser") #modparam("domain", "db_mode", 1) # Use caching
# ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1)
# ----- presence params ----- /* enable presence server support */ #!ifdef WITH_PRESENCE modparam("presence|presence_xml", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("presence_xml", "force_active", 1) modparam("presence", "server_address", "sip:10.0.0.10:5060") #!endif
# ----- nathelper ----- #!ifdef WITH_NAT modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:7722") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_bflag", 7) modparam("nathelper", "sipping_from", "sip:pinger@kamailio.orgsip%3Apinger@kamailio.org ") modparam("registrar|nathelper", "received_avp", "$avp(i:80)") modparam("usrloc", "nat_bflag", 6) #!endif
####### Routing Logic ########
# main request routing logic
route{
if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }
if(!sanity_check("1511", "7")) { xlog("Malformed SIP message from $si:$sp\n"); exit; }
# NAT detection route(NAT);
if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails } route(RELAY); #route(1); } else { #if (is_method("SUBSCRIBE") && uri == myself) { if (is_method("SUBSCRIBE") && $rd == "10.3.0.249:5060") { # in-dialog subscribe requests route(PRESENCE); #route(2); exit; } if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; }
#initial requests
# CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) t_relay(); exit; }
t_check_trans();
# authentication # route(AUTH);
# record routing for dialog forming requests (in case they are routed) # - remove preloaded route headers remove_hf("Route"); if (is_method("INVITE|SUBSCRIBE")) record_route();
# account only INVITEs if (is_method("INVITE")) { if (uri =~ "sip:5[0-9][0-9][0-9]@*"){ route(3); exit; } #setflag(1); # do accounting } if (!uri==myself) /* replace with following line if multi-domain support is used */ ##if (!is_uri_host_local()) { append_hf("P-hint: outbound\r\n"); route(RELAY); }
# requests for my domain
if( is_method("PUBLISH|SUBSCRIBE")) route(PRESENCE);
if (is_method("PUBLISH")) { sl_send_reply("503", "Service Unavailable"); exit; } if (is_method("REGISTER")) { if(isflagset(5)) { setbflag("6"); # uncomment next line to do SIP NAT pinging ## setbflag("7"); } if (!save("location")) sl_reply_error();
exit; }
if ($rU==$null) { #$rU==10.3.0.252 # request with no Username in RURI sl_send_reply("484","Address Incomplete"+$rU); exit; }
#route(PSTN);
# apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases");
if (!lookup("location")) { switch ($rc) { case -1: case -3: t_newtran(); t_reply("404", "Not Found"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } }
# when routing via usrloc, log the missed calls also setflag(2); route(RELAY); }
route[RELAY] { #!ifdef WITH_NAT # if (check_route_param("nat=yes")) { # setbflag("6"); # } # if (isflagset(5) || isbflagset("6")) { # route(RTPPROXY); # } #!endif
# /* example how to enable some additional event routes */ # if (is_method("INVITE")) { # #t_on_branch("BRANCH_ONE"); # t_on_reply("REPLY_ONE"); # t_on_failure("FAIL_ONE"); # }
if (!t_relay()) { sl_reply_error(); } exit; }
# Presence server route route[PRESENCE] { #!ifdef WITH_PRESENCE if (!t_newtran()) { sl_reply_error(); exit; };
if(is_method("PUBLISH")) { handle_publish(); t_release(); } else if( is_method("SUBSCRIBE")) { handle_subscribe(); t_release(); } exit; #!endif # if presence enabled, this part will not be executed if (is_method("PUBLISH") || $rU==$null) { sl_send_reply("404", "Not here"); exit; } return; }
# Authentication route route[AUTH] { #!ifdef WITH_AUTH if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!www_authorize("", "subscriber")) { www_challenge("", "0"); exit; }
if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { # authenticate if from local subscriber (uncomment to enable auth) if (from_uri==myself) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (is_method("PUBLISH")) { if ($au!=$tU) { sl_send_reply("403","Forbidden auth ID"); exit; } } else { if ($au!=$fU) { sl_send_reply("403","Forbidden auth ID"); exit; } }
consume_credentials(); # caller authenticated } } #!endif return; }
# Caller NAT detection route route[NAT]{ #!ifdef WITH_NAT force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); } setflag(5); } #!endif return; }
# RTPProxy control route[RTPPROXY] { #!ifdef WITH_NAT if (is_method("BYE")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); } if (!has_totag()) add_rr_param(";nat=yes"); #!endif return; }
# PSTN GW routing route[PSTN] { #!ifdef WITH_PSTN # check if PSTN GW IP is defined if (strempty($sel(cfg_get.pstn.gw_ip))) { xlog("SCRIPT: PSTN rotuing enabled but pstn.gw_ip not defined\n"); return; }
# route to PSTN dialed numbers starting with '+' or '00' # (international format) # - update the condition to match your dialing rules for PSTN routing if(!($rU=~"^(+|00)[1-9][0-9]{3,20}$")) return;
# only local users allowed to call if(from_uri!=myself) { sl_send_reply("403", "Not Allowed"); exit; }
$ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip);
route(RELAY); exit; #!endif
return; }
# Sample branch router branch_route[BRANCH_ONE] { xdbg("new branch at $ru\n"); }
# Sample onreply route onreply_route[REPLY_ONE] { xdbg("incoming reply\n"); #!ifdef WITH_NAT if ((isflagset(5) || isbflagset("6")) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } if (isbflagset("6")) { fix_nated_contact(); } #!endif }
# Sample failure route failure_route[FAIL_ONE] { #!ifdef WITH_NAT if (is_method("INVITE") && (isbflagset("6") || isflagset(5))) { unforce_rtp_proxy(); } #!endif
if (t_is_canceled()) { exit; }
# uncomment the following lines if you want to block client # redirect based on 3xx replies. ##if (t_check_status("3[0-9][0-9]")) { ##t_reply("404","Not found"); ## exit; ##}
# uncomment the following lines if you want to redirect the failed # calls to a different new destination ##if (t_check_status("486|408")) { ## sethostport("192.168.2.100:5060"); ## append_branch(); ## # do not set the missed call flag again ## t_relay(); ##} } route[3] { if (uri=~ "sip:5[0-9][0-9][0-9]@*"){ #nuevamente corrobora la regla de marcación rewritehostport("10.3.0.249:5060"); route(RELAY); exit; } }