[Users] Multi-domain setup problem

Daniel-Constantin Mierla daniel at voice-system.ro
Mon Nov 14 15:40:38 CET 2005


Hello,

when shifting to multi-domain you have to enable several parameters 
named use_domain in different modules. Check the READMEs of the modules 
you use.

Cheers,
Daniel

On 11/12/05 23:59, Daryl Sanders wrote:
> Hi Everyone,
>
> I just added a second domain to my openser box and screwed things up somehow.
> Maybe someone can help figure out what's going on.
> I'm using the new onsip config (unmodified except IPs & replacing
> breaks w/returns).
> I'm using mediaproxy for NAT. Everything worked properly prior to
> adding the new domain.
> I did add the new domain to the domain table, and have loaded the
> domain module with modparams as follows.
>
> modparam("domain", "db_url", "mysql://openser:mypass@myhost/openser")
> modparam("domain", "db_mode", 1)
> modparam("domain", "domain_table", "domain")
> modparam("domain", "domain_col", "domain")
>
> Existing domain: sip1.mydomain.com
> New domain: sip1.mydomain.com
>
> user1: X-Lite (behind NAT)
> private-IP (192.168.x.x)
> Registers using domain sip1.mydomain.com
>
> user2: Linksys PAP2-NA
> public-IP (same subnet as Utsarcom)
> Registers using domain sip1.mydomain.com
>
> user3: Utstarcom iAN-02EX
> public-IP (63.225.x.x)
> Registers using domain sip2.mydomain.com
>
> Here is what happens now...
>
> - All users can register fine.
> - user1 & user2 can only receives calls from user3 (can't call others
> or pstn , 407 Proxy Auth Required)
> - user3 is the only one who can call others (calls to user1,user2, &
> pstn are fine)
>
> It's probably just something simple I missed, but I can't seem to
> figure it out. As always, thanks for your assistance.
>
> - Daryl
>
> _______________________________________________
> Users mailing list
> Users at openser.org
> http://openser.org/cgi-bin/mailman/listinfo/users
>
>   




More information about the Users mailing list