[SR-Users] UAC parameter for enabling and disabling remote registration

[Ahmed Fouad]

Thanks and how can I control that timer after enabling the contact ?

Regarding the dbase flag I don't see the current values saved there , it's only shown when dumping.
________________________________
From: Henning Westerholt <hw at gilawa.com>
Sent: Thursday, April 14, 2022 10:50:15 AM
To: Ahmed Fouad <afouad at gmail.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: RE: [SR-Users] UAC parameter for enabling and disabling remote registration


Hello,



if you do the reg enable and it shows also enabled in the flags, there should be (maybe after a timer run period) a new REGISTER send out.



Regarding your request, I would try to add the DB records with “disabled” flag in the database, and then using the uac_reg_enable/_disable function in the cfg file.



Cheers,



Henning



--

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com<https://gilawa.com/>



From: Ahmed Fouad <afouad at gmail.com>
Sent: Wednesday, April 13, 2022 9:15 PM
To: Henning Westerholt <hw at gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration



Hi,

I did many tests with some combinations and I'm afraid I've a problem here with registration after being disabled

1 - Having modparam("uac", "reg_active", 0)

Completely disable the remote registration and can't be overridden any other options trying to enable single registration from the code or from kamcmd.



2 - Having modparam("uac", "reg_active", 1)

Remote registration is automatic and sent when kamailio is restarted and all expiration is being handled perfectly.

thus dumping reg_dump the flags = 20 ( 16 (2^4) - registration initialized  + 4 (2^2) - registration succeeded )



I tried to disable this registration using kamcmd uac.reg_disable l_username XXXXX and it's disabled and confirmed flags: 21 (+ 1 (2^0) - registration profile is disabled ))

but my problem here I didn't see unregister going with expiration = 0 to clear the registration from the remote pbx so I used kamcmd uac.reg_unregister l_username XXXXX and message went fine and extension was unregistered.

tried again to enable it back using kamcmd uac.reg_enable l_username XXXXXX I see the flags goes to 16 only and no register message is being sent and it's stale like this even by running kamcmd uac.reg_reload



My request is simply I've some entries in the uacreg table. I'd like to start kamailio without remote registration being enabled and have the ability to enable/disable the REGISTER messages from the configuration file.



Can you please advise how to accomplish such scenario ?







On Wed, Apr 13, 2022 at 11:03 AM Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>> wrote:

Hello,



don’t know without looking to the code, I’d say just give it a try and see if it works.



Cheers,



Henning



--

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com<https://gilawa.com/>



From: Ahmed Fouad <afouad at gmail.com<mailto:afouad at gmail.com>>
Sent: Wednesday, April 13, 2022 4:42 PM
To: Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>>
Cc: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration



Hi,



I've tested this parameter and it's working as expected but I've a question here. When I start kamailio with disabled remote registration mode then from the configuration I use uac_reg_request_to(user, mode) to register only a single extension.

Will this scenario work ?

or the whole remote registration is disabled and needs to be enabled first ?



My goal is to send single registrations only from the code logic, not when kamailio starts.



On Wed, Apr 13, 2022 at 10:16 AM Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>> wrote:

Hello,



it is present e.g. in 5.5.x, also available in docs: https://kamailio.org/docs/modules/5.5.x/modules/uac.html#uac.p.reg_active



Why do you think it was not merged?



Cheers,



Henning



--

Henning Westerholt – https://skalatan.de/blog/

Kamailio services – https://gilawa.com<https://gilawa.com/>



From: sr-users <sr-users-bounces at lists.kamailio.org<mailto:sr-users-bounces at lists.kamailio.org>> On Behalf Of Ahmed Fouad
Sent: Wednesday, April 13, 2022 4:11 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: [SR-Users] UAC parameter for enabling and disabling remote registration



Hi,



I was wondering if this patch was ever merged to the current release(s)



https://github.com/kamailio/kamailio/commit/49f354276df3cfc2cdb0f85b5a1839f86733aead?diff=split



I'd like to start Kamailio with all remote registration disabled then enable based on the code logic



Thanks in advance,


--

Best Regards,
Ahmed Fouad


--

Best Regards,
Ahmed Fouad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220414/60b5e54f/attachment.htm>