[SR-Users] UAC parameter for enabling and disabling remote registration

[Henning Westerholt]

Hello,

if you do the reg enable and it shows also enabled in the flags, there should be (maybe after a timer run period) a new REGISTER send out.

Regarding your request, I would try to add the DB records with “disabled” flag in the database, and then using the uac_reg_enable/_disable function in the cfg file.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: Ahmed Fouad <afouad at gmail.com>
Sent: Wednesday, April 13, 2022 9:15 PM
To: Henning Westerholt <hw at gilawa.com>
Cc: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration

Hi,
I did many tests with some combinations and I'm afraid I've a problem here with registration after being disabled
1 - Having modparam("uac", "reg_active", 0)
Completely disable the remote registration and can't be overridden any other options trying to enable single registration from the code or from kamcmd.

2 - Having modparam("uac", "reg_active", 1)
Remote registration is automatic and sent when kamailio is restarted and all expiration is being handled perfectly.
thus dumping reg_dump the flags = 20 ( 16 (2^4) - registration initialized  + 4 (2^2) - registration succeeded )

I tried to disable this registration using kamcmd uac.reg_disable l_username XXXXX and it's disabled and confirmed flags: 21 (+ 1 (2^0) - registration profile is disabled ))
but my problem here I didn't see unregister going with expiration = 0 to clear the registration from the remote pbx so I used kamcmd uac.reg_unregister l_username XXXXX and message went fine and extension was unregistered.
tried again to enable it back using kamcmd uac.reg_enable l_username XXXXXX I see the flags goes to 16 only and no register message is being sent and it's stale like this even by running kamcmd uac.reg_reload

My request is simply I've some entries in the uacreg table. I'd like to start kamailio without remote registration being enabled and have the ability to enable/disable the REGISTER messages from the configuration file.

Can you please advise how to accomplish such scenario ?



On Wed, Apr 13, 2022 at 11:03 AM Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>> wrote:
Hello,

don’t know without looking to the code, I’d say just give it a try and see if it works.

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: Ahmed Fouad <afouad at gmail.com<mailto:afouad at gmail.com>>
Sent: Wednesday, April 13, 2022 4:42 PM
To: Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>>
Cc: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: Re: [SR-Users] UAC parameter for enabling and disabling remote registration

Hi,

I've tested this parameter and it's working as expected but I've a question here. When I start kamailio with disabled remote registration mode then from the configuration I use uac_reg_request_to(user, mode) to register only a single extension.
Will this scenario work ?
or the whole remote registration is disabled and needs to be enabled first ?

My goal is to send single registrations only from the code logic, not when kamailio starts.

On Wed, Apr 13, 2022 at 10:16 AM Henning Westerholt <hw at gilawa.com<mailto:hw at gilawa.com>> wrote:
Hello,

it is present e.g. in 5.5.x, also available in docs: https://kamailio.org/docs/modules/5.5.x/modules/uac.html#uac.p.reg_active

Why do you think it was not merged?

Cheers,

Henning

--
Henning Westerholt – https://skalatan.de/blog/
Kamailio services – https://gilawa.com<https://gilawa.com/>

From: sr-users <sr-users-bounces at lists.kamailio.org<mailto:sr-users-bounces at lists.kamailio.org>> On Behalf Of Ahmed Fouad
Sent: Wednesday, April 13, 2022 4:11 PM
To: Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Subject: [SR-Users] UAC parameter for enabling and disabling remote registration

Hi,

I was wondering if this patch was ever merged to the current release(s)

https://github.com/kamailio/kamailio/commit/49f354276df3cfc2cdb0f85b5a1839f86733aead?diff=split

I'd like to start Kamailio with all remote registration disabled then enable based on the code logic

Thanks in advance,


--
Best Regards,
Ahmed Fouad


--
Best Regards,
Ahmed Fouad
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20220414/4a6d035c/attachment.htm>