[SR-Users] Dispatcher does not go to 2nd server
Jurijs Ivolga
jurijs.ivolga at gmail.com
Wed Jul 22 08:37:54 CEST 2020
Hi Aristedis,
To use both servers simultaneously you need to have group id as 1 for both
of them, because ds_select_dst("1", "4") will choose only servers from
group what is in the first argument(in this case 1) and group 2 will never
be used in your case.
To make this work probably you need to look into Asterisk Realtime, in that
case Asterisk will have to have a shared DB with shared registrations. Some
time ago realtime asterisk didn't support the path, but it was in version
13 as I remember, so I hope it is fixed now.
Jurijs
On Wed, Jul 22, 2020 at 9:24 AM Daniel-Constantin Mierla <miconda at gmail.com>
wrote:
> Hello,
>
> if you send first register to one asterisk and it replies 401, then the
> following up register has to be sent to same asterisk, otherwise the
> authentication fails if you send to 2nd asterisk and it doesn't recognize
> the nonce, no matter the user password is the same.
>
> Maybe asterisk has options to "share" (generate and recognize same) nonce
> values across different instance, if yes, be sure it is enabled. In
> kamailio that is possible by setting the appropriate parameters in auth
> module.
>
> Cheers,
> Daniel
> On 22.07.20 07:16, Aristeidis Tsitras wrote:
>
> I experience something really strange when i change the dispatcher list to
> have the same priority both of the servers. I am getting 401 (unauthorised)
> to the extensions trying to register. Even though they in asterisk they
> seem to be registered, the debug shows 401. Not able to call from one
> extension to the other.
> here is the console error:
>
>
>
>
>
>
>
>
>
>
>
>
> *<--- Transmitting (NAT) to 192.168.0.99:5060 <http://192.168.0.99:5060>
> ---> SIP/2.0 401 Unauthorized Via: SIP/2.0/UDP
> 192.168.0.99;branch=z9hG4bKe78c.2793112e87a37f021cda7a582ba8c703.0;received=192.168.0.99;rport=5060
> Via: SIP/2.0/UDP
> 192.168.0.117:5060;received=192.168.0.117;branch=z9hG4bK823694525;rport=5060
> From: <sip:500 at 192.168.0.99 <sip%3A500 at 192.168.0.99>>;tag=580308996 To:
> <sip:500 at 192.168.0.99 <sip%3A500 at 192.168.0.99>>;tag=as4657cc95 Call-ID:
> 822746835-5060-1 at BJC.BGI.B.BBH <822746835-5060-1 at BJC.BGI.B.BBH> CSeq: 2005
> REGISTER Server: Asterisk PBX 11.25.3 Allow: INVITE, ACK, CANCEL, OPTIONS,
> BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE Supported: replaces,
> timer WWW-Authenticate: Digest algorithm=MD5, realm="asterisk",
> nonce="73fd892f", stale=true Content-Length: 0*
>
>
>
> On the other hand if i change the priority to 0 & 1 the servers
> respectively, then no errors in asterisk console and they can call between
> each other.
> This is really odd.
>
>
>
> Στις Τρί, 21 Ιουλ 2020 στις 3:32 μ.μ., ο/η Jurijs Ivolga <
> jurijs.ivolga at gmail.com> έγραψε:
>
>> Ah,
>>
>> I see the problem, just change list file in following way:
>>
>> 1 sip:192.168.0.100:5080 0 0 maxload=20
>> 1 sip:192.168.0.101:5080 0 0 maxload=20
>>
>> Jurijs
>>
>>
>> On Tue, Jul 21, 2020 at 3:28 PM Jurijs Ivolga <jurijs.ivolga at gmail.com>
>> wrote:
>>
>>> Hi Aristedis,
>>>
>>> Sorry, indeed you have module parameters.
>>>
>>> When one asterisk is down what you see when you run:
>>>
>>> kamcmd dispatcher.list
>>>
>>> Jurijs
>>>
>>>
>>> On Tue, Jul 21, 2020 at 3:19 PM Aristeidis Tsitras <tsitras at gmail.com>
>>> wrote:
>>>
>>>> i know that there is something wrong, but i can not figure it out.
>>>> Especially for the modparam settings that Mr Jurijs Ivolga is proposing, I
>>>> already had them. it is the kamailio.cfg that I originally attached.
>>>>
>>>> Unfortunately I did not manage to find anything in the parameters that
>>>> will solve the problem as proposed by Villasmil and Semenov. I have given a
>>>> try on changes but nothing good came up.
>>>>
>>>>
>>>>
>>>> Στις Τρί, 21 Ιουλ 2020 στις 2:48 μ.μ., ο/η Arsen Semenov <
>>>> arsperger at gmail.com> έγραψε:
>>>>
>>>>> Hi Aristeidis,
>>>>> David is right, first would be good to check the status of the
>>>>> destinations.
>>>>>
>>>>> In your configuration there are couple of things to have in mind: need
>>>>> to set correct flag param
>>>>>
>>>>> https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.flags
>>>>> select the algorithm used to select the destination (ds_select_dst)
>>>>> and have a faulure_route where the next destination will be tried in case
>>>>> first is down.
>>>>> You can find the examples in the module doc.
>>>>>
>>>>> Cheers,
>>>>>
>>>>> On Tue, Jul 21, 2020 at 4:11 PM Aristeidis Tsitras <tsitras at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> I have a Kamailio and 2 asterisk servers. All users are created in
>>>>>> both of the asterisk servers. I am forwarding the registration to asterisk.
>>>>>> The problem is that it is always used on only one server from the list.
>>>>>> Even if one goes to shutdown, then there is not any registration sent to
>>>>>> the available server. Even if *some *of the extensions can be seen
>>>>>> registered in both of the asterisk's, if the secondary goes down, then
>>>>>> there are no services for the phones.
>>>>>>
>>>>>> I am attaching the kamailio.cfg. My dispatch list is:
>>>>>> 1 sip:192.168.0.100:5080 0 0 maxload=20
>>>>>> 2 sip:192.168.0.101:5080 0 0 maxload=20
>>>>>>
>>>>>> In both of the asterisk servers i am using sip.conf to create users
>>>>>> and s sip trunk for the Kamailio. Nothing special about it.
>>>>>>
>>>>>> I am looking to find what is wrong with my config and i cannot
>>>>>> loadbalance/failover to the asterisk servers.
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Kamailio (SER) - Users Mailing List
>>>>>> sr-users at lists.kamailio.org
>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Arsen Semenov
>>>>>
>>>>> _______________________________________________
>>>>> Kamailio (SER) - Users Mailing List
>>>>> sr-users at lists.kamailio.org
>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>> _______________________________________________
>>>> Kamailio (SER) - Users Mailing List
>>>> sr-users at lists.kamailio.org
>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing Listsr-users at lists.kamailio.orghttps://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
> --
> Daniel-Constantin Mierla -- www.asipto.comwww.twitter.com/miconda -- www.linkedin.com/in/miconda
> Funding: https://www.paypal.me/dcmierla
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200722/f590e65c/attachment.htm>
More information about the sr-users
mailing list