[SR-Users] Dispatcher does not go to 2nd server

[Arsen Semenov]

Hi Aristeidis,
David is right, first would be good to check the status of the destinations.

In your configuration there are couple of things to have in mind: need to
set correct flag param
https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.flags
select the algorithm used to select the destination (ds_select_dst) and
have a faulure_route where the next destination will be tried in case first
is down.
You can find the examples in the module doc.

Cheers,

On Tue, Jul 21, 2020 at 4:11 PM Aristeidis Tsitras <tsitras at gmail.com>
wrote:

> I have a Kamailio and 2 asterisk servers. All users are created in both of
> the asterisk servers. I am forwarding the registration to asterisk. The
> problem is that it is always used on only one server from the list. Even if
> one goes to shutdown, then there is not any registration sent to the
> available server. Even if *some *of the extensions can be seen registered
> in both of the asterisk's, if the secondary goes down, then there are no
> services for the phones.
>
> I am attaching the kamailio.cfg. My dispatch list is:
> 1 sip:192.168.0.100:5080 0 0 maxload=20
> 2 sip:192.168.0.101:5080 0 0 maxload=20
>
> In both of the asterisk servers i am using sip.conf to create users and s
> sip trunk for the Kamailio. Nothing special about it.
>
> I am looking to find what is wrong with my config and i cannot
> loadbalance/failover to the asterisk servers.
>
>
>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>


-- 
Arsen Semenov
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200721/d146c4f3/attachment.htm>