[SR-Users] Kamailio & Freeswitch as media and SBC

John Tuxies atuxnull at gmail.com
Fri Jul 17 09:30:00 CEST 2020


Hi Karsten.
Regarding Freeswitch, i have done the changes on the Freeswitch.
Regarding the xlog you mention, i am not sure what to do.

On Fri, Jul 17, 2020 at 9:49 AM Karsten Horsmann <khorsmann at gmail.com>
wrote:

> Hi John,
>
> On Kamailio side you can use xlog to print out log messages from config to
> debug. That helps a lot to understand what is going on. You should
> configure also syslog for Kamailio correctly.
>
> Also the howto described changes on freeswitch side whare you can use
> fs_cli to trace the call if you enable the correct debug level.
>
> It seems for me that your call is not be answered by your freeswitch, but
> that's guessing.
>
> Cheers
> Karsten
>
> John Tuxies <atuxnull at gmail.com> schrieb am Fr., 17. Juli 2020, 07:41:
>
>> Thanks for the replies.
>> By following the command kamailio -c -f kamailio i managed to correct all
>> the mistakes and now i have Kamailio running with Siremis. Unfortunately i
>> am not able to place any call anywhere. No error is reported, but the call
>> hangs there. Even if i press end call, softphones get hanged for around 1
>> minute!
>> i do not receive 200OK. Here is the print screen of the call. 192.168.1.7
>> is one of the softphones and 192.168.1.213 is the Kamailio with Freeswitch
>> system.
>> [image: image.png]
>>
>> I am attaching the kamailio.cfg
>> Not able to make calls between extensions.
>>
>>
>> On Thu, Jul 16, 2020 at 10:51 PM Karsten Horsmann <khorsmann at gmail.com>
>> wrote:
>>
>>> Hi,
>>>
>>> Between the howto version and today actual version of Kamailio are many
>>> changes that can generate errors (due for example rename or new module
>>> params in kamailio). So copy paste an howto works not out of the box (if
>>> it's not exactly what the author used).
>>>
>>> Start with the shipped default config, then try to adopt the logic step
>>> by step with
>>> kamailio -c -f /etc/kamailio/kamailio.cfg is a great place to check
>>> Syntax fails.
>>>
>>> And which Kamailio version you use is also a good way to to describe
>>> your issue.
>>>
>>> Cheers
>>> Karsten
>>>
>>>
>>> David Villasmil <david.villasmil.work at gmail.com> schrieb am Do., 16.
>>> Juli 2020, 15:33:
>>>
>>>> What we need are the errors :)
>>>>
>>>> On Thu, 16 Jul 2020 at 13:46, John Tuxies <atuxnull at gmail.com> wrote:
>>>>
>>>>> Trying to setup Kamailio with Freeswitch in a Debian machine as in
>>>>> the
>>>>> http://kb.asipto.com/freeswitch:kamailio-3.3.x-freeswitch-1.2.x-sbc,
>>>>> but Kamailio fails to start and gives a ton of errors.
>>>>> Before of the alterations Kamailio and Siremis start correctly and i
>>>>> can easily create users through Siremis. After the changes to include
>>>>> Freeswitch's blocks, it fails to start. All run in the same machine with IP
>>>>> 192.168.1.213.
>>>>> I am attaching kamailio.cfg (named as test1.txt) if someone could spot
>>>>> the error, please. Also i am attaching the kamailio.cfg(Original1.txt) when
>>>>> it was working fine with Siremis.
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Kamailio (SER) - Users Mailing List
>>>>> sr-users at lists.kamailio.org
>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>>
>>>> --
>>>> Regards,
>>>>
>>>> David Villasmil
>>>> email: david.villasmil.work at gmail.com
>>>> phone: +34669448337
>>>> _______________________________________________
>>>> Kamailio (SER) - Users Mailing List
>>>> sr-users at lists.kamailio.org
>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>>
>>> _______________________________________________
>>> Kamailio (SER) - Users Mailing List
>>> sr-users at lists.kamailio.org
>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users at lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200717/bd4f02d6/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 11732 bytes
Desc: not available
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200717/bd4f02d6/attachment.png>


More information about the sr-users mailing list