[SR-Users] pv_parse_spec2(): wrong char error
Henning Westerholt
hw at skalatan.de
Sun Jan 12 12:18:30 CET 2020
Thanks for letting us know, good that you found the issue.
You might want to switch your mailman subscription from digest mode to normal mode - that makes it easier to participate in discussions.
Cheers,
Henning
Am 11.01.20 um 17:16 schrieb Sam Ware:
Sorry to have bothered everyone. But the following is the correct usage. I had a typo a line above that was showing as being in this line.
$avp(techprefix) = $(rU{s.select,0,#});
On Sat, Jan 11, 2020 at 9:00 AM Sam Ware <sam.ware at gmail.com<mailto:sam.ware at gmail.com>> wrote:
Alex,
I get the following error
ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
ERROR: bad config file (1 errors)
CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-40: Can't get from cache: $(rU{s.select,0,#)
David,
I did try escaping and get the same error.
$avp(techprefix) = $(rU{s.select,0,\#});
additionally, I think I initially tried it double quoted.
$avp(techprefix) = $(rU{s.select,0,"#"});
Resulted in:
ERROR: <core> [core/pvapi.c:1127]: pv_parse_spec2(): wrong char [
ERROR: bad config file (1 errors)
CRITICAL: <core> [core/cfg.y:3537]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 462, column 23-42: Can't get from cache: $(rU{s.select,0,"#")
Here is the entire block.
if ($rU =~ "[\*\#]") {
xlog("L_INFO", "[$ci] -> $rU appears to have a tech prefix, processing...\n");
if ($rU =~ "\*") {
$avp(techprefix) = $(rU{s.select,0,*});
## Reset the RURI user to the non-tech prefix'ed value
$rU = $(rU{s.select,1,*});
## Overwrite the message source variable with "sourceip-techprefix"
$var(messagesource) = $_s($si-$avp(techprefix));
} else if ($rU =~ "\#") {
$avp(techprefix) = $(rU{s.select,0,#)});
## Reset the RURI user to the non-tech prefix'ed value
$rU = $(rU{s.select,1,#});
## Overwrite the message source variable with "sourceip-techprefix"
$var(messagesource) = $_s($si-$avp(techprefix));
}
}
On Sat, Jan 11, 2020 at 5:00 AM <sr-users-request at lists.kamailio.org<mailto:sr-users-request at lists.kamailio.org>> wrote:
Send sr-users mailing list submissions to
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
To subscribe or unsubscribe via the World Wide Web, visit
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
or, via email, send a message with subject or body 'help' to
sr-users-request at lists.kamailio.org<mailto:sr-users-request at lists.kamailio.org>
You can reach the person managing the list at
sr-users-owner at lists.kamailio.org<mailto:sr-users-owner at lists.kamailio.org>
When replying, please edit your Subject line so it is more specific
than "Re: Contents of sr-users digest..."
Today's Topics:
1. Re: Kamailio in Docker Compile Error (Sergey Safarov)
2. Re: Kamailio in Docker Compile Error (Sam Ware)
3. Kamailio 5.2.2 IMS -enum_query question (Woscek, Martin W.)
4. String Transformation Question (Sam Ware)
5. Re: String Transformation Question (Alex Balashov)
6. Re: String Transformation Question (David Villasmil)
---------- Forwarded message ----------
From: Sergey Safarov <s.safarov at gmail.com<mailto:s.safarov at gmail.com>>
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Cc:
Bcc:
Date: Fri, 10 Jan 2020 14:38:02 +0300
Subject: Re: [SR-Users] Kamailio in Docker Compile Error
please try kamailio-ci:5.3.2-alpine
I will fix error about kamailio-ci:5.3.1-alpine.
On Fri, Jan 10, 2020 at 1:53 PM Asgaroth <00asgaroth00 at gmail.com<mailto:00asgaroth00 at gmail.com>> wrote:
Hi,
I see that the kamailio-ci:5.3.1-alpine tag exists, but was getting an error when trying to pull it 2 days ago, 5.3.0- alpine works fine.
Unfortunately I cannot post the actual docker pull error right now (in airport, on my phone)
On Fri 10 Jan 2020, 08:32 Sergey Safarov, <s.safarov at gmail.com<mailto:s.safarov at gmail.com>> wrote:
yum -y install yum-utils
yum-config-manager --add-repo http://rpm.kamailio.org/centos/kamailio.repo
yum install kamailio
Also you can use this docker image
https://hub.docker.com/repository/docker/kamailio/kamailio-ci
On Fri, Jan 10, 2020 at 10:58 AM Daniel-Constantin Mierla <miconda at gmail.com<mailto:miconda at gmail.com>> wrote:
Hello,
try to install which and pkg-config tools.
Cheers,
Daniel
On 10.01.20 02:21, Sam Ware wrote:
I am attempting to create my own docker image on Centos 7. During the build, I get the following error message during the "make all" phase.
----------------------------------------------------------------------
CC (gcc) [kamailio] core/cfg.tab.o
LD (gcc) [kamailio] kamailio
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
CC (gcc) [M db_mysql.so] km_dbase.o
km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
#include <mysql.h>
^
compilation terminated.
make[1]: *** [km_dbase.o] Error 1
make: *** [modules] Error 1
------------------------------------------------------------------------
I checked and the mysql.h exists in the /usr/include/mysql directory.
Any thoughts?
FYI, here is my Dockerfile
FROM centos:7
MAINTAINER “Sam D Ware” sware at o1.com<mailto:sware at o1.com>
ENV container docker
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done);
RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
&& rm -rf /etc/systemd/system/.wants/ \
&& rm -rf /lib/systemd/system/local-fs.target.wants/ \
&& rm -f /lib/systemd/system/sockets.target.wants/udev \
&& rm -f /lib/systemd/system/sockets.target.wants/initctl \
&& rm -rf /lib/systemd/system/basic.target.wants/ \
&& rm -f /lib/systemd/system/anaconda.target.wants/*
VOLUME [ “/sys/fs/cgroup”]
RUN yum -y install epel-release
RUN yum -y update
RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
WORKDIR /usr/local/src/
RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio
WORKDIR /usr/local/src/kamailio/
RUN git checkout -b 5.3 origin/5.3
RUN make cfg
COPY modules.lst /usr/local/src/kamailio/src/
RUN make all
RUN make install
RUN groupadd kamailio
RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio
RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio
COPY kamailio.service /etc/systemd/system/kamailio.service
RUN yum clean all; systemctl enable kamailio
CMD ["/usr/sbin/init"]
--
Sam D Ware
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com<http://www.kamailioworld.com>
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
---------- Forwarded message ----------
From: Sam Ware <sam.ware at gmail.com<mailto:sam.ware at gmail.com>>
To: miconda at gmail.com<mailto:miconda at gmail.com>
Cc: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Bcc:
Date: Fri, 10 Jan 2020 07:23:46 -0600
Subject: Re: [SR-Users] Kamailio in Docker Compile Error
Thanks Daniel,
That got me past that hurdle. It was the "which". Looks like the pkg-config tools was already install; probably a preq for one of the other pkgs.
Sam
On Fri, Jan 10, 2020 at 1:58 AM Daniel-Constantin Mierla <miconda at gmail.com<mailto:miconda at gmail.com>> wrote:
Hello,
try to install which and pkg-config tools.
Cheers,
Daniel
On 10.01.20 02:21, Sam Ware wrote:
I am attempting to create my own docker image on Centos 7. During the build, I get the following error message during the "make all" phase.
----------------------------------------------------------------------
CC (gcc) [kamailio] core/cfg.tab.o
LD (gcc) [kamailio] kamailio
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
make[1]: which: Command not found
CC (gcc) [M db_mysql.so] km_dbase.o
km_dbase.c:36:19: fatal error: mysql.h: No such file or directory
#include <mysql.h>
^
compilation terminated.
make[1]: *** [km_dbase.o] Error 1
make: *** [modules] Error 1
------------------------------------------------------------------------
I checked and the mysql.h exists in the /usr/include/mysql directory.
Any thoughts?
FYI, here is my Dockerfile
FROM centos:7
MAINTAINER “Sam D Ware” sware at o1.com<mailto:sware at o1.com>
ENV container docker
RUN (cd /lib/systemd/system/sysinit.target.wants/; for i in ; do [ $i == systemd-tmpfiles-setup.service ] || rm -f $i; done);
RUN rm -rf /lib/systemd/system/multi-user.target.wants/ \
&& rm -rf /etc/systemd/system/.wants/ \
&& rm -rf /lib/systemd/system/local-fs.target.wants/ \
&& rm -f /lib/systemd/system/sockets.target.wants/udev \
&& rm -f /lib/systemd/system/sockets.target.wants/initctl \
&& rm -rf /lib/systemd/system/basic.target.wants/ \
&& rm -f /lib/systemd/system/anaconda.target.wants/*
VOLUME [ “/sys/fs/cgroup”]
RUN yum -y install epel-release
RUN yum -y update
RUN yum -y install git-core gcc gcc-c++ flex bison mysql-devel
RUN yum -y install mariadb-devel hiredis hiredis-devel curl nss make
WORKDIR /usr/local/src/
RUN git clone --depth 1 --no-single-branch https://github.com/kamailio/kamailio kamailio
WORKDIR /usr/local/src/kamailio/
RUN git checkout -b 5.3 origin/5.3
RUN make cfg
COPY modules.lst /usr/local/src/kamailio/src/
RUN make all
RUN make install
RUN groupadd kamailio
RUN adduser --system -g kamailio --shell /bin/false -c "Kamailio" --home /var/run/kamailio kamailio
RUN cp /usr/local/src/kamailio/pkg/kamailio/obs/kamailio.sysconfig /etc/sysconfig/kamailio
COPY kamailio.service /etc/systemd/system/kamailio.service
RUN yum clean all; systemctl enable kamailio
CMD ["/usr/sbin/init"]
--
Sam D Ware
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com>
www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda>
Kamailio World Conference - April 27-29, 2020, in Berlin -- www.kamailioworld.com<http://www.kamailioworld.com>
--
Sam D Ware
---------- Forwarded message ----------
From: "Woscek, Martin W." <mwoscek at mitre.org<mailto:mwoscek at mitre.org>>
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Cc:
Bcc:
Date: Fri, 10 Jan 2020 16:57:29 +0000
Subject: [SR-Users] Kamailio 5.2.2 IMS -enum_query question
Hi,
I am trying to invoke unum lookups from calls to enum_query() ,is_from_user_enum() and enum_pv_query().
However we are not seeing any enum lookups over the wire using wireshark.
In the Kamailio.cfg the following are set:
loadmodule "enum"
modparam("enum", "domain_suffix", "mydnsserver.org<http://mydnsserver.org>.")
modparam("enum", "i_enum_suffix", " mydnsserver.org<http://mydnsserver.org>.")
sample use in our Kamailio.cfg file:
if(!enum_query("mydnsserver.org<http://mydnsserver.org>.")) {
xlog(“….);
#do something
} else {
Xlog(“….”)
#do something else
}
I do see NAPTR lookups being done by the other Kamailio IMS processes initially when it starts up so I know it has connectivity to the DNS server, but none for the invoked enum queries.
We are running Kamailio 5.2.2.
Thanks,
Martin
---------- Forwarded message ----------
From: Sam Ware <sam.ware at gmail.com<mailto:sam.ware at gmail.com>>
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Cc:
Bcc:
Date: Fri, 10 Jan 2020 17:22:17 -0600
Subject: [SR-Users] String Transformation Question
We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam D Ware
---------- Forwarded message ----------
From: Alex Balashov <abalashov at evaristesys.com<mailto:abalashov at evaristesys.com>>
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Cc:
Bcc:
Date: Fri, 10 Jan 2020 18:24:44 -0500
Subject: Re: [SR-Users] String Transformation Question
What’s the error?
—
Sent from mobile, with due apologies for brevity and errors.
On Jan 10, 2020, at 6:23 PM, Sam Ware <sam.ware at gmail.com<mailto:sam.ware at gmail.com>> wrote:
We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam D Ware
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
---------- Forwarded message ----------
From: David Villasmil <david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>>
To: "Kamailio (SER) - Users Mailing List" <sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>>
Cc:
Bcc:
Date: Fri, 10 Jan 2020 23:24:51 +0000
Subject: Re: [SR-Users] String Transformation Question
Have you tried scaping it? Never done it, tho
On Fri, 10 Jan 2020 at 23:23, Sam Ware <sam.ware at gmail.com<mailto:sam.ware at gmail.com>> wrote:
We are receiving traffic with a tech prefix. We want to be able to use a # (hash tag) for the separator for the tech prefix and the remote user ($rU). I was using the s.select transformation before when using * for separator, but I get an error because it appears that it being interpreted as a comment. Any suggestions?
Example:
## How I was doing it with the *
$avp(techprefix) = $(rU{s.select,0,*});
## How I tried and got an error for the hash tag
$avp(techprefix) = $(rU{s.select,0,#});
--
Sam D Ware
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Regards,
David Villasmil
email: david.villasmil.work at gmail.com<mailto:david.villasmil.work at gmail.com>
phone: +34669448337
_______________________________________________
sr-users mailing list
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Sam D Ware
--
Sam D Ware
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users at lists.kamailio.org<mailto:sr-users at lists.kamailio.org>
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Henning Westerholt - https://skalatan.de/blog/
Kamailio services - https://gilawa.com
Kamailio Merchandising - https://skalatan.de/merchandising/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20200112/3ed0dc83/attachment.html>
More information about the sr-users
mailing list