[SR-Users] Kamailio/Freeswitch auth user and UserID

[David Villasmil]

You may want to come in on the slack channel. Easier.

On Wed, 14 Aug 2019 at 08:13, David Villasmil <
david.villasmil.work at gmail.com> wrote:

> Sorry Petarr,
>
> I still don’t fully understand.
> Let’s put it this way.
>
> Users will register on kamailio using the schemes you just pasted, i.e.:
> 1001-123456789, and from there, whenever they make a call to another
> extension in freeswitch, you say fs doesn’t like the extension scheme so
> you want to do something like 1001 instead? I.e.: remove anything from the
> - on?
>
>
> On Wed, 14 Aug 2019 at 07:41, Petarr Jones <petarrjones at outlook.com>
> wrote:
>
>> Hi David
>>
>> I am clearly not articulating the issue properly. I don't have a problem
>> with the authentication from a Kamailio perspective but rather trying to
>> understand how I would authenticate a user in Kamailio based on a different
>> user name than in Freeswitch.
>>
>> As an example, I would like the phone to authenticate with Kamailio as
>> user "1001-126252581276" but the resulting backend to Freeswitch be done
>> only using the extension "1001", since Freeswitch seems far more
>> comfortable with the UserID and extension being the same rather than trying
>> to use "1001-126252581276" in Freeswitch and rely on "number-alias" for the
>> extension.
>>
>> Regards
>> Petarr
>>
>>
>> ------------------------------
>> *From:* sr-users <sr-users-bounces at lists.kamailio.org> on behalf of
>> David Villasmil <david.villasmil.work at gmail.com>
>> *Sent:* 13 August 2019 23:07
>>
>> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
>> *Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
>>
>> I see.
>> Ok but you somehow need those user/passwords to authenticate.
>> It’s simple, add those users/pass to the dB table in kamailio.
>> You configure /etc/kamailio/kamctlrc for your db, then to create the
>> database you
>> execute:
>>
>> kamdbctl create
>>
>> You end up with the kamailio database, and insert your records in the
>> “subscriber” table. Then configure usrloc to get the users’ authentication
>> info from that table.
>>
>> Hope that helps!
>>
>> David
>>
>> On Wed, 14 Aug 2019 at 06:44, Petarr Jones <petarrjones at outlook.com>
>> wrote:
>>
>> Thanks David.
>>
>> The asterisk PBX is being shut down as it is hosted with a different
>> provider and I am wanting to bring the PBX in-house. Once migrated the
>> asterisk PBX will be gone/deleted.
>>
>> I don't have access to any of the Asterisk backend, which is why I am
>> moving to a different solution. The reason for wanting to stay with the
>> same username is testing. If I could just change the dns record for the SIP
>> server, then the phones will automatically connect to the new system and if
>> there are any issues, I can just switch the dns record back.
>> ------------------------------
>> *From:* sr-users <sr-users-bounces at lists.kamailio.org> on behalf of
>> David Villasmil <david.villasmil.work at gmail.com>
>> *Sent:* 13 August 2019 22:33
>> *To:* Kamailio (SER) - Users Mailing List <sr-users at lists.kamailio.org>
>> *Subject:* Re: [SR-Users] Kamailio/Freeswitch auth user and UserID
>>
>> Is the users data asterisk uses in a db? If so, you can use the usrloc
>> module to actually get the authentication info from that dB table. Check it
>> out.
>>
>> On Wed, 14 Aug 2019 at 06:17, Petarr Jones <petarrjones at outlook.com>
>> wrote:
>>
>> Hi
>>
>> I am new to Kamailio and would like some guidance on linking up with
>> Freeswitch.
>>
>> I have an exiting hosted Asterisk PBX that uses a combination of
>> extension and pbx username (eg 1001-126252581276) and I want to move it
>> over to Kamailio/Freeswitch without re-configuring the SIP phones.
>>
>> I have tried Freeswitch "number-alias" but it does not seem like a good
>> fit due to things like BLF not working and the added overhead etc.
>>
>> Is there a way to configure Kamailio to authenticate a user based on the
>> above username and then send an extension to Freeswitch as the UserID
>> instead, thereby separating the Kamailio authentication from the Freeswitch
>> UserID?
>>
>> As I don't yet have a full understanding of the Kamailio/Freeswitch
>> interaction, I don't know whether this will cause other issues?
>>
>> Thanks in advance
>> Petarr
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> --
>> Regards,
>>
>> David Villasmil
>> email: david.villasmil.work at gmail.com
>> phone: +34669448337
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
>> --
>> Regards,
>>
>> David Villasmil
>> email: david.villasmil.work at gmail.com
>> phone: +34669448337
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users at lists.kamailio.org
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
>>
> --
> Regards,
>
> David Villasmil
> email: david.villasmil.work at gmail.com
> phone: +34669448337
>
-- 
Regards,

David Villasmil
email: david.villasmil.work at gmail.com
phone: +34669448337
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.kamailio.org/pipermail/sr-users/attachments/20190814/94c44f2a/attachment.html>